Internal breakpoints do not need IDs and assigning them from a counter
separate from the user ID counter can be a cause of confusion.
If a user breakpoint is overlayed on top of a pre-existing internal
breakpoint the temporary ID will be surfaced as if it was a user ID,
possibly conflicting with another user ID.
If a temporary breakpoint is overlayed on top of a pre-existing user
breakpoint and the user breakpoint is first deleted and then
re-created, the user ID will be resurrected along with the breakpoint,
instead of allocating a fresh one.
This change removes internal breakpoint IDs entirely, only user
breakpoints receive an ID.
Changes Breakpoint to allow multiple overlapping internal breakpoints
on the same instruction address.
This is done by changing the Breakpoint structure to contain a list of
"breaklets", each breaklet has a BreakpointKind and a condition
expression, independent of the other.
A breakpoint is considered active if any of its breaklets are active.
A breakpoint is removed when all its breaklets are removed.
We also change the terminology "internal breakpoint" to "stepping
breakpoint":
HasInternalBreakpoints -> HasSteppingBreakpoints
IsInternal -> IsStepping
etc...
The motivation for this change is implementing watchpoints on stack
variables.
Watching a stack variable requires also setting a special breakpoint to
find out when the variable goes out of scope. These breakpoints can not
be UserBreakpoints because only one user breakpoint is allowed on the
same instruction and they can not be internal breakpoints because they
should not be cleared when a next operation is completed (they should
be cleared when the variable watch is cleared).
Updates #279
Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
* proc: move defer breakpoint code into a function
Moves the code that sets a breakpoint on the first deferred function,
used by both next and StepOut, to its function.
* proc: implement reverse step/next/stepout
When the direction of execution is reversed (on a recording) Step, Next and
StepOut will behave similarly to their forward version. However there are
some subtle interactions between their behavior, prologue skipping, deferred
calls and normal calls. Specifically:
- when stepping backwards we need to set a breakpoint on the first
instruction after each CALL instruction, once this breakpoint is reached we
need to execute a single StepInstruction operation to reverse step into the
CALL.
- to insure that the prologue is skipped reverse next needs to check if it
is on the first instruction after the prologue, and if it is behave like
reverse stepout.
- there is no reason to set breakpoints on deferred calls when reverse
nexting or reverse stepping out, they will never be hit.
- reverse step out should generally place its breakpoint on the CALL
instruction that created the current stack frame (which will be the CALL
instruction immediately preceding the instruction at the return address).
- reverse step out needs to treat panic calls and deferreturn calls
specially.
* service,terminal: implement reverse step, next, stepout
* tests: misc test fixes for go1.14
- math.go is now ambiguous due to changes to the go runtime so specify
that we mean our own math.go in _fixtures
- go list -m requires vendor-mode to be disabled so pass '-mod=' to it
in case user has GOFLAGS=-mod=vendor
- update version of go/packages, required to work with go 1.14 (and
executed go mod vendor)
- Increased goroutine migration in one development version of Go 1.14
revealed a problem with TestCheckpoints in command_test.go and
rr_test.go. The tests were always wrong because Restart(checkpoint)
doesn't change the current thread but we can't assume that when the
checkpoint was taken the current goroutine was running on the same
thread.
* goversion: update maximum supported version
* Makefile: disable testing lldb-server backend on linux with Go 1.14
There seems to be some incompatibility with lldb-server version 6.0.0
on linux and Go 1.14.
* proc/gdbserial: better handling of signals
- if multiple signals are received simultaneously propagate all of them to the
target threads instead of only one.
- debugserver will drop an interrupt request if a target thread simultaneously
receives a signal, handle this situation.
* dwarf/line: normalize backslashes for windows executables
Starting with Go 1.14 the compiler sometimes emits backslashes as well
as forward slashes in debug_line, normalize everything to / for
conformity with the behavior of previous versions.
* proc/native: partial support for Windows async preempt mechanism
See https://github.com/golang/go/issues/36494 for a description of why
full support for 1.14 under windows is problematic.
* proc/native: disable Go 1.14 async preemption on Windows
See https://github.com/golang/go/issues/36494
* pkg/proc: Introduce Target
* pkg/proc: Remove Common.fncallEnabled
Realistically we only block it on recorded backends.
* pkg/proc: Move fncallForG to Target
* pkg/proc: Remove CommonProcess
Remove final bit of functionality stored in CommonProcess and move it to
*Target.
* pkg/proc: Add SupportsFunctionCall to Target
Modifies FindFileLocation, FindFunctionLocation and LineToPC as well as
service/debugger to support inlining and introduces the concept of
logical breakpoints.
For inlined functions FindFileLocation, FindFunctionLocation and
LineToPC will now return one PC address for each inlining and one PC
for the concrete implementation of the function (if present).
A proc.Breakpoint will continue to represent a physical breakpoint, at
a single memory location.
Breakpoints returned by service/debugger, however, will represent
logical breakpoints and may be associated with multiple memory
locations and, therefore, multiple proc.Breakpoints.
The necessary logic is introduced in service/debugger so that a change
to a logical breakpoint will be mirrored to all its physical
breakpoints and physical breakpoints are aggregated into a single
logical breakpoint when returned.
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
The location specified '<fnname>:0' could be used to set a breakpoint
on the entry point of the function (as opposed to locspec '<fnname>'
which sets it after the prologue).
Setting a breakpoint on an entry point is almost never useful, the way
this feature was implemented could cause it to be used accidentally and
there are other ways to accomplish the same task (by setting a
breakpoint on the PC address directly).
* *: use loglevel to control what gets logged instead of output redirection
This stops logrus from doing all the formatting just to discard it
immediately afterwards.
* logflags: replace default formatter of logrus
The default formatter of logrus emits logs in two different formats
depending on whether or not the output is going to a terminal. The
output format for non-terminals is indented to be machine readable, but
we mostly read logs ourselves and the excessive quoting makes that
format unreadable.
When outputting to terminals it uses ANSI escape codes unconditionally,
without checking whether the terminal it is connected to actually
supports colors.
This commit replaces the default formatter with a much simpler
formatter that always uses a more readable format, doesn't use colors
and places the key-value pairs at the beginning of the line (which is a
better match for how we use them).
* cmd/dlv: add command line options to redirect logs
Adds two options, --log-to-file and --log-to-fd, to redirect logs to a
file or to a file descriptor.
When one of those two options is specified the "API server listening
at:" message will also be redirected to the specified file/file
descriptor.
This allows clients that want to use the "API server listening at:"
message to do so even if they want to redirect the target's stdout to
another file or device.
Implements #1179, #1523
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
