* go.mod: update golang.org/x/tools to v0.1.8
Fixes TestGeneratedDoc on go1.18
* TeamCity: bump test matrix
Add 1.18 to test matrix. Remove 1.15 from test matrix and from support range.
* proc,tests: update for regabi on arm64 and 386
Make sure that stacktrace registers always contain the PC register of
the current frame, even though the debug_frame rules might not specify
it on architectures that use a link register.
The PC register is needed to look up loclist entries for variable
evaluation.
* goversion: bump maximum supported Go version to 1.18
* proc: disable asyncpreempt on linux/arm64
Asyncpreempt on linux/arm64 can sometimes restart a sequence of
instructions which will make breakpoint appear to be hit twice in some
cases.
* service/debugger: fix bug internal err with Restart on recorded target
If Restart is called after a Continue and Rewind on a recorded target
that has already terminated it will return an internal error.
* proc/gdbserial: allow rewind to work after process exit with rr
It is sometimes useful to set breakpoints and rewind a terminated
process when using rr, for example if interested in the last execution
of some function.
RR will not allow a backward continue after the process exit packet has
been sent, however rr will also generate a synthetic SIGKILL right
before process exit.
Treat this packet as a process exit and change some things so both
continuing backwards and setting breakpoints can be done, on recorded
targets, after process exit has been reported.
Fix signal handling during thread single stepping so that signals that
are generated by executing the current instruction are immediately
propagated to the inferior, while signals other signals sent to the
thread are delayed until the full resume happens.
Fixes a bug where a breakpoint set on an instruction that causes a
SIGSEGV would make Delve hang and a bug where signals received during
single step would make it look like an instruction is executed twice.
Fixes#2801Fixes#2792
Add some dummy go files so that 'go mod vendor' works for modules that
require Delve, becuase directories that do not contain any go code will
not be vendored.
* proc: log errors reading debug_info
Because of an incorrect use of debug/dwarf.Reader errors encountered
while reading debug_info were not reported.
Updates #2786
* proc: use debug_line_str section for PE and Macho-O files
Updates #2786
* made Pid a method of Target instead of a method of Process
* changed argument of NewTarget to ProcessInternal, since that's the
interface that backends have to implement
* removed warnings about ProcessInternal since there is no way for
users of pkg/proc to access those methods anyway
* made RecordingManipulation an optional interface for backends, Target
supplies its own dummy implementation when the backend doesn't
* inlined small interfaces that only existed to be inlined in
proc.Process anyway
* removed unused function findExecutable in the Windows and no-native
darwin backends
* removed (*EvalScope).EvalVariable, an old synonym for EvalExpression
In go1.18 buildInfo will include the git revision hash, use that to fix
the Build field of Version so that it is correct even if Delve wasn't
built using make.go.
* proc,locspec: support setting breakpoints by func name on generic funcs
Changes proc.Function to parse function names correctly when they
contain instantiation lists and locspec to match generic functions.
* vendor: update golang.org/x/tools
The old version of golang.org/x/tools is incompatible with the new
iexport format.
Debugserver has a bug where writing to a AVX-2 or AVX-512 register does
not work unless it is followed by at least a write to a AVX (not 2 or
512) register.
See also: https://bugs.llvm.org/show_bug.cgi?id=52362Fixes#2767
There are persistent issues with watchpoints on Windows, it is not
clear whether it's a problem with the VM running the tests or if there
is a real bug in our implementation of hardware breakpoints on Windows.
Until the cause can be determined watchpoints on Windows will be
disabled.
Updates #2768
We want to provide more flexibility for users to make changes to their configurations while the debug session is running. This could be accomplished by creating a custom request, but that were require a new UI as well, and every client of dlv dap to provide its own UI for this. By using the evaluate context, users can use the already existing debug console to change their configurations.
This change includes a refactor of the terminal code in order to share the code with the dap package.
This change provides a very similar to UI as the terminal package, but there are different configuration options that are DAP specific. We plan to use this same mechanism to expose a few other commands including "sources" to help users debug an ineffective substitutePath configuration.
* service/dap: remove deadlock in TestLaunchDebugRequest
Fixes#2746
* terminal: fix TestScopePrefix flakiness
When there are more than 10 frames api.PrintStack will prefix the
output with spaces to right justify the frame number, which confuses
TestScopePrefix.
* _scripts: pass -buildvcs for Go 1.18 and later on TeamCity
Go 1.18 will try to stamp builds with the VCS version, this doesn't
work on TeamCity because the checkout isn't a valid repository (but
looks like it).
Pass -buildvcs=false to disable this feature.
* proc: switch to goroutine stack if first frame's func can not be found
If the first frame on the system stack can not be resolved to a
function switch directly to the goroutine stack.
Normally calls can't be performed on recorded processes, becuase the
future instructions executed by the target are predetermined. The rr
debugger however has a mechanism that allows this by taking the current
state of the recording and allowing it to diverge from the recording,
temporarily.
This commit adds support for starting and ending such diversions around
function calls.
Note: this requires rr version 5.5 of later to work, see:
https://github.com/rr-debugger/rr/pull/2748
LoadConfig warnings should obey the logflags configuration and should
also be delayed until after the "listening at" message, which should
always be the first thing output.
Co-authored-by: Suzy Mueller <suzmue@golang.org>
* proc/native: always stop after RequestManualStop on Windows
On Windows RequestManualStop will generate an exception on a special
DbgUiRemoteBreakin thread, sometimes this thread will die before we
finish stopping the process. We need to account for that and still stop
even if the thread is gone and no other thread hit a breakpoint.
Fixes flakiness of TestIssue419.
* proc/native: fix watchpoints with new threads on Windows
When a new thread is created we must reapply all watchpoints to it,
like we do on linux.
* tests: be lenient on goroutinestackprog tests on Windows
We can not guarantee that we find all goroutines stopped in a good
place and sometimes the stacktrace fails on Windows.
Adds watchpoint support to gdbserver backend for rr debugger and
debugserver on macOS/amd64 and macOS/arm64.
Also changes stack watchpoints to support reverse execution.
Change debug_info type reader and proc to convert parametric types into
their real types by reading the corresponding dictionary entry and
using the same method used for interfaces to retrieve the DIE from a
runtime._type address.
'2586e9b1'.
With generics a single function can have multiple concrete
instantiations, the old version of FindFileLocation supported at most
one concrete instantiation per function and any number of inlined
calls, this supports any number of inlined calls and concrete
functions.
When the function we are calling is an autogenerated stub (because, for
example, we are calling it through a function pointer) the declaration
line of variables is meaningless and could cause us to discard valid
return arguments.
Go 1.18 removed the jmpdefer call from deferreturn, now deferreturn is
a normal function call that can appear on the stack, rules for
detecting a deferreturn call must be changed and new code must be added
to skip it while stepping out.
Internal breakpoints do not need IDs and assigning them from a counter
separate from the user ID counter can be a cause of confusion.
If a user breakpoint is overlayed on top of a pre-existing internal
breakpoint the temporary ID will be surfaced as if it was a user ID,
possibly conflicting with another user ID.
If a temporary breakpoint is overlayed on top of a pre-existing user
breakpoint and the user breakpoint is first deleted and then
re-created, the user ID will be resurrected along with the breakpoint,
instead of allocating a fresh one.
This change removes internal breakpoint IDs entirely, only user
breakpoints receive an ID.
Right now, if (*compositeMemory).WriteMemory needs to write a value to
a register that's smaller than the full size of the register (say, a
uint32 being passed as an argument), then (*AMD64Registers).SetReg can
later fail a sanity check that ensures the passed DwarfRegister is a
full size register.
Fix this by reading the old value of the register and overwriting just
the relevant parts with the new register. For the purposes of an
argument, it would probably be fine to just pad with zeroes, but merging
with the existing value is what gdb does.
Fixes#2698
Log points are special kinds of breakpoints that do not 'break' but instead log a message and then continue. This change implements basic log points that simply log the provided message, without any interpolation.
In order to resume execution after hitting a breakpoint, I added a new lock resumeMu and tracked the running state within the DAP server. resumeMu must be held in order to issue a debugger request that would start execution. This means it can be used to make sure that another goroutine does not resume execution while you are holding the lock.
Most of the synchronization logic is taken from PR #2530
Updates golang/vscode-go#123
This changes allow us to parse Go+BoringCrypto which formatted in <GoVersion>b<BoringCryptoVersion> so that we can surpress `Version of Go is too old for this version of Delve` error.
Fixes#2711
* pkg/proc: update check for system goroutine
The finalizer goroutine can be either a system goroutine or a user goroutine. It is considered a user goroutine only when it calls back to user code. This change attempts to get closer to the implementation in the src/runtime/traceback.go by checking the value of fingRunning.
We could alternatively adopt the approximation done by src/cmd/trace/trace.go which only special cases "runtime.main", and always considers the finalizer to be a system goroutine.
The string variant is more powerful and can be passed
directly to "echo -e" / "printf" and friends.
Remove the mention of the integer variant from the default config. This
makes the option appear more consistent with other color options.
The user shouldn't care about the historic differences.
Commit 3d6bbbe9 made "config -list" print strings in quotes to avoid
the strings being interpreted as terminal escape codes. This commit
does the same for "source-list-line-color", which is a raw interface.
This fixes "config -list" with a config like
source-list-line-color: "\x1b[34m"
The "int" variant is already printed correctly, so just use the
default case for that.
If we cannot find debug information locally on the system, try and
invoke debuginfod-find in order to ask the linux distribution we're on
to find the debug information for us.
