* Makefile: discard stderr of "go list"
In module mode "go" will print messages about downloading modules to
stderr, we shouldn't confuse them for the real command output.
* proc/core: enable PIE tests
PIE tests for core files were never enabled due to a missing flag.Parse
call.
* proc/linux: do not route signals to threads while stopping
While we are trying to stop the process we should not route signals
sent to threads because that will result in threads being resumed.
Also keep better track of which threads are stopped.
This fixes an incompatibility with Go 1.14, which sends a lot of
signals to its threads to implement non-cooperative preemption,
resulting in Delve hanging waiting for an already-stopped thread to
stop.
In principle however this bug has nothing to do with Go 1.14 and could
manifest in any instance of high signal pressure.
* Makefile: discard stderr of "go list"
In module mode "go" will print messages about downloading modules to
stderr, we shouldn't confuse them for the real command output.
Instead of just sending unhandled signals back to the process send them
to the specific thread that received them.
This is important because:
1. debugserver does not appear to support the vCont;CXX packet without
specifying a target thread
2. the non-cooperative preemption change in an upcoming version of Go
(1.15?) will require sending signals to a specific thread.
Fixes#1744
Modifies FindFileLocation, FindFunctionLocation and LineToPC as well as
service/debugger to support inlining and introduces the concept of
logical breakpoints.
For inlined functions FindFileLocation, FindFunctionLocation and
LineToPC will now return one PC address for each inlining and one PC
for the concrete implementation of the function (if present).
A proc.Breakpoint will continue to represent a physical breakpoint, at
a single memory location.
Breakpoints returned by service/debugger, however, will represent
logical breakpoints and may be associated with multiple memory
locations and, therefore, multiple proc.Breakpoints.
The necessary logic is introduced in service/debugger so that a change
to a logical breakpoint will be mirrored to all its physical
breakpoints and physical breakpoints are aggregated into a single
logical breakpoint when returned.
program
When evaluating type casts always resolve array types.
Instead of resolving them by looking up the string in debug_info
construct a fake array type so that a type cast to an array type always
works as long as the element type exists.
We already did this for byte arrays, this commit extends this to any
array type. The reason is that we return a fake array type (that
doesn't exist in the target program) for the array of a channel type.
Fixes#1736
Fixes a case of breakpoint confusion on resume caused by having two
breakpoints one byte apart. This bug can cause the target program to
resume execution a single byte inside an instruction and crash either
with SIGILL or a SIGSEGV, or misbehave (depending on how the truncated
instruction is decoded).
native.(*Thread).StepInstruction should call FindBreakpoint using
adjustPC==false because at that point the PC of the thread should
already have been adjusted (and it has been).
Make the 'list' command succeed for file:line expressions that don't
map to any instruction.
Adds an argument to the FindLocations API call that makes FindLocations
return if the expression can be parsed, even if it doesn't end up
matching any instruction in debug_line.
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
Splits the code that loads function information from debug_info into
multiple functions.
This makes the changes needed to implement logical breakpoints easier
to make.
Trust argument order to determine argument frame layout when calling
functions, this allows calling optimized functions and removes the
special cases for runtime.mallocgc.
Fixes#1589
Add options to start a stacktrace from the values saved in the
runtime.g struct as well as a way to disable the stackSwitch logic and
just get a normal stacktrace.
If a closure captures a variable but also defines a variable of the
same name in its root scope the shadowed flag would, sometimes, not be
appropriately applied to the captured variable.
This change:
1. sorts the variable list by depth *and* declaration line, so that
closure captured variables always appear before other root-scope
variables, regardless of the order used by the compiler
2. marks variable with the same name as shadowed even if there is only
one scope at play.
This fixes the problem but as a side effect:
1. programs compiled with Go prior to version 1.9 will have the
shadowed flag applied arbitrarily (previously the shadowed flag was not
applied at all)
2. programs compiled with Go prior to versoin 1.11 will still exhibit
the bug, as they do not have DeclLine information.
Fixes#1672
The fix for #1428 was buggy, partly because I communicated poorly. Sorry
about that.
The size of the TLS segment should be padded such that TLS addresses
are congruent in the file to where they will end up memory, i.e.
(tlsoffset%align) == (vaddr%align). In most cases, vaddr will be aligned
and it won't matter, but if not then simply aligning the end of the
segment is incorrect. This should be right.
(For the record, the current rounding logic is working in bits, but
PtrSize is in bytes, so it wasn't working as originally intended
either.)
Intent here is to bring optargorder up to date with delve
and keep it in sync (and to use optargorder to help monitor
compiler output for debugging quality regressions).
proc.Next and proc.Step will call, after setting their temp
breakpoints, curthread.SetCurrentBreakpoint. This is intended to find
if one of the newly created breakpoints happens to be at the same
instruction that curthread is stopped at.
However SetCurrentBreakpoint is intended to be called after a Continue
and StepInstruction operation so it will also detect if curthread is
stopped one byte after a breakpoint.
If the instruction immediately preceeding the current instruction of
curthread happens to:
1. have one of the newly created temp breakpoints
2. be one byte long
SetCurrentBreakpoint will believe that we just hit that breakpoint and
therefore the instruction should be repeated, and thus rewind the PC of
curthread by 1.
We should distinguish between the two uses of SetCurrentBreakpoint and
disable the check for "just hit" breakpoints when inappropriate.
Fixes#1656
Moves EvalScope methods to the proper file and organizes everything
together. Also makes some EvalScope methods no longer methods and just
pure functions.
* proc: fix stacktraces when a SIGSEGV happens during a cgo call
When a SIGSEGV happens in a cgo call (for example as a result of
dereferencing a NULL pointer) the stack layout will look like this:
(system stack) runtime.fatalthrow
(system stack) runtime.throw
(system stack) runtime.sigpanic
(system stack) offending C function
... other C functions...
(system stack) runtime.asmcgocall
(goroutine stack) call inside cgo
The code in switchStack would switch directly from the
runtime.fatalthrow frame to the first frame in the goroutine stack,
hiding important information.
Disable this switch for runtime.fatalthrow and reintroduce the check
for runtime.mstart that existed before this version of the code was
implemented in commit 7bec20.
This problem was reported in comment:
https://github.com/go-delve/delve/issues/935#issuecomment-512182533
* cmd/dlv: actually disable C compiler optimizations when building
* *: Add .cirrus.yml for FreeBSD testing
* *: run go mod tidy
* service/test: prefer 127.0.0.1 over localhost
* dwarf/line: fix TestDebugLinePrologueParser
* vendor: rerun go mod vendor
Propagate signals when stepping because debugserver will report them,
from the issue:
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $z0,105525d,1#c9
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $OK#00
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $vCont;s:c41c3#50
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $T1cthread:c41c3;threads:c41c3,c41d7,c41d8,c41d9,c41da;thread-pcs:105525d,7fffc464bf46,7fffc464bbf2,7fffc464bbf2,7fffc46...
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $Z0,105525d,1#a9
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $OK#00
in this case we request a single step on thread c41c3 but debugserver
reports instead a signal (in this case SIGWINCH).
Fixes#1610
Add variables flag to mark variables that are allocated on a register
(and have no address) and variables that we read as result of a
function call (and are allocated on a stack that no longer exists when
we show them to the user).
Increases the maximum string length from 64 to 1MB when loading strings
for a binary operator, also delays the loading until it's necessary.
This ensures that comparison between strings will always succeed in
reasonable situations.
Fixes#1615
Backports debug/dwarf commit: 535741a69a1300d1fe2800778b99c8a1b75d7fdd
CL: https://go-review.googlesource.com/18459
The x/debug/dwarf that we used for dwarf/godwarf/type.go was forked
from debug/dwarf long before this commit.
Original description:
Currently readType simultaneously constructs a type graph and resolves
the sizes of the types. However, these two operations are
fundamentally at odds: the order we parse a cyclic structure in may be
different than the order we need to resolve type sizes in. As a
result, it's possible that when readType attempts to resolve the size
of a typedef, it may dereference a nil Type field of another typedef
retrieved from the type cache that's only partially constructed.
To fix this, we delay resolving typedef sizes until the end of the
readType recursion, when the full type graph is constructed.
Fixes#1601
* proc: allow simultaneous call injection to multiple goroutines
Changes the call injection code so that we can have multiple call
injections going on at the same time as long as they happen on distinct
goroutines.
* proc: fix EvalExpressionWithCalls for constant expressions
The lack of address of constant expressions would confuse EvalExpressionWithCalls
Fixes#1577
* tests: fix tests for Go 1.13
- Go 1.13 doesn't autogenerate init functions anymore, tests that
expected that now fail and should be skipped.
- Plugin tests now need -gcflags'all=-N -l' now, we were probably
getting lucky with -gcflags='-N -l' before.
* proc: allow signed integers as shift counts
Go1.13 allows signed integers to be used as the right hand side of a
shift operator, change eval to match.
* goversion: update maximum supported version
* travis: force Go to use vendor directory
Travis scripts get confused by "go: downloading" lines, the exact
reason is not clear. Testing that the vendor directory is up to date is
a good idea anyway.
Support for bulk queries makes the DWARF quality checker
(github.com/dr2chase/dwarf-goodness/cmd/dwarf-goodness)
run much more efficiently (replace quadratic cost with
linear).
The location specified '<fnname>:0' could be used to set a breakpoint
on the entry point of the function (as opposed to locspec '<fnname>'
which sets it after the prologue).
Setting a breakpoint on an entry point is almost never useful, the way
this feature was implemented could cause it to be used accidentally and
there are other ways to accomplish the same task (by setting a
breakpoint on the PC address directly).
Also fixes findCompileUnitForOffset which was broken in some edge cases
(when looking up an offset inside the last child of the compilation
unit) which don't happen in normal executables (we only look up types, and those
are always direct childs of compile units).
Allow changing the value of a string variable to a new literal string,
which requires calling runtime.mallocgc to allocate the string into the
target process.
This means that a command like:
call f("some string")
is now supported.
Additionally the command:
call s = "some string"
is also supported.
Fixes#826
