* *: Add .cirrus.yml for FreeBSD testing
* *: run go mod tidy
* service/test: prefer 127.0.0.1 over localhost
* dwarf/line: fix TestDebugLinePrologueParser
* vendor: rerun go mod vendor
* terminal/command: add support for next [count]
* disallow negative counts.
* handle github comments, and regen docs.
* Fix the fact that we don't print the file info in the last step of the next count.
* Fix a typo, cleanup a few other observations.
Propagate signals when stepping because debugserver will report them,
from the issue:
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $z0,105525d,1#c9
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $OK#00
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $vCont;s:c41c3#50
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $T1cthread:c41c3;threads:c41c3,c41d7,c41d8,c41d9,c41da;thread-pcs:105525d,7fffc464bf46,7fffc464bbf2,7fffc464bbf2,7fffc46...
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $Z0,105525d,1#a9
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $OK#00
in this case we request a single step on thread c41c3 but debugserver
reports instead a signal (in this case SIGWINCH).
Fixes#1610
* Add --continue to continue process on launch/attach
* Add small test of --continue
* regenerate usage docs
* minor cleanup
* Use similar approach to `trace` and connect and detach using a client instance
* back out previous attempt
* regen usage doc
* fix up continue test
* fix TestContinue to properly test --continue
* back out unnecessary changes
* update faq
Add variables flag to mark variables that are allocated on a register
(and have no address) and variables that we read as result of a
function call (and are allocated on a stack that no longer exists when
we show them to the user).
Increases the maximum string length from 64 to 1MB when loading strings
for a binary operator, also delays the loading until it's necessary.
This ensures that comparison between strings will always succeed in
reasonable situations.
Fixes#1615
Backports debug/dwarf commit: 535741a69a1300d1fe2800778b99c8a1b75d7fdd
CL: https://go-review.googlesource.com/18459
The x/debug/dwarf that we used for dwarf/godwarf/type.go was forked
from debug/dwarf long before this commit.
Original description:
Currently readType simultaneously constructs a type graph and resolves
the sizes of the types. However, these two operations are
fundamentally at odds: the order we parse a cyclic structure in may be
different than the order we need to resolve type sizes in. As a
result, it's possible that when readType attempts to resolve the size
of a typedef, it may dereference a nil Type field of another typedef
retrieved from the type cache that's only partially constructed.
To fix this, we delay resolving typedef sizes until the end of the
readType recursion, when the full type graph is constructed.
Fixes#1601
If the argument of 'source' ends in '.star' it will be interpreted as a
starlark script.
If the argument of 'source' is '-' an interactive starlark repl will be
started.
For documentation on how the starlark execution environment works see
Documentation/cli/starlark.md.
The starlark API is autogenerated from the JSON-RPC API by
script/gen-starlark-bindings.go.
In general for each JSON-RPC API a single global starlark function is
created.
When one of those functions is called (through a starlark script) the
arguments are converted to go structs using reflection. See
unmarshalStarlarkValue in pkg/terminal/starbind/conv.go.
If there are no type conversion errors the JSON-RPC call is executed.
The return value of the JSON-RPC call is converted back into a starlark
value by interfaceToStarlarkValue (same file):
* primitive types (such as integers, floats or strings) are converted
by creating the corresponding starlark value.
* compound types (such as structs and slices) are converted by wrapping
their reflect.Value object into a type that implements the relevant
starlark interfaces.
* api.Variables are treated specially so that their Value field can be
of the proper type instead of always being a string.
Implements #1415, #1443
* proc: allow simultaneous call injection to multiple goroutines
Changes the call injection code so that we can have multiple call
injections going on at the same time as long as they happen on distinct
goroutines.
* proc: fix EvalExpressionWithCalls for constant expressions
The lack of address of constant expressions would confuse EvalExpressionWithCalls
Fixes#1577
* tests: fix tests for Go 1.13
- Go 1.13 doesn't autogenerate init functions anymore, tests that
expected that now fail and should be skipped.
- Plugin tests now need -gcflags'all=-N -l' now, we were probably
getting lucky with -gcflags='-N -l' before.
* proc: allow signed integers as shift counts
Go1.13 allows signed integers to be used as the right hand side of a
shift operator, change eval to match.
* goversion: update maximum supported version
* travis: force Go to use vendor directory
Travis scripts get confused by "go: downloading" lines, the exact
reason is not clear. Testing that the vendor directory is up to date is
a good idea anyway.
Support for bulk queries makes the DWARF quality checker
(github.com/dr2chase/dwarf-goodness/cmd/dwarf-goodness)
run much more efficiently (replace quadratic cost with
linear).
The location specified '<fnname>:0' could be used to set a breakpoint
on the entry point of the function (as opposed to locspec '<fnname>'
which sets it after the prologue).
Setting a breakpoint on an entry point is almost never useful, the way
this feature was implemented could cause it to be used accidentally and
there are other ways to accomplish the same task (by setting a
breakpoint on the PC address directly).
Also fixes findCompileUnitForOffset which was broken in some edge cases
(when looking up an offset inside the last child of the compilation
unit) which don't happen in normal executables (we only look up types, and those
are always direct childs of compile units).
Allow changing the value of a string variable to a new literal string,
which requires calling runtime.mallocgc to allocate the string into the
target process.
This means that a command like:
call f("some string")
is now supported.
Additionally the command:
call s = "some string"
is also supported.
Fixes#826
The bitmasks for transforming a 64-bit register into it's lower-bit
counterparts (e.g. RAX -> EAX -> AX -> AH/AL) were incorrect. This patch
fixes the bitmasks and adds an additional test.
Childless compile units would confuse loadDebugInfoMaps.
No test because I don't know what causes go to invoke GNU As in such a
way that it produces a childless compile unit.
Fixes#1572
Without this a client calling an method on a version of Delve that
doesn't have that method (for example because it's old) will never get
a response back.
Instead of reading partial units as we see them skip them entirely and
then re-read them when they are imported, directly into the destination
compile unit.
This avoids a lot of duplicate code in the loadDebugInfoMaps function
and will simplify implementing logical breakpoints and support for the
new DW_AT_go_package_name attribute added in Go 1.13.
The current wording is confusing - the file exists and the line exists, so what is the problem? I suspect this ambiguity is behind #1496 and likely others.
Also I updated the style to return values like the rest of the code in the file, which is also more readable (IMO and per https://github.com/golang/go/wiki/CodeReviewComments#named-result-parameters)
* proc: support nested function calls
Changes the code in fncall.go to support nested function calls.
This changes delays argument evaluation until after we have used
the call injection protocol to allocate an argument frame. When
evaluating the parse tree of an expression we'll initiate each
function call we find on the way down and then complete the function
call on the way up.
For example. in:
f(g(x))
we will:
1. initiate the call injection protocol for f(...)
2. progress it until the point where we have space for the arguments
of 'f' (i.e. when we receive the debugCallAXCompleteCall message
from the target runtime)
3. inititate the call injection protocol for g(...)
4. progress it until the point where we have space for the arguments
of 'g'
5. copy the value of x into the argument frame of 'g'
6. finish the call to g(...)
7. copy the return value of g(x) into the argument frame of 'f'
8. finish the call to f(...)
Updates #119
* proc: bugfix: closure addr was wrong for non-closure functions
The initial implementation of the 'call' command required the
function call to be the root expression, i.e. something like:
double(3) + 1
was not allowed, because the root expression was the binary operator
'+', not the function call.
With this change expressions like the one above and others are
allowed.
This is the first step necessary to implement nested function calls
(where the result of a function call is used as argument to another
function call).
This is implemented by replacing proc.CallFunction with
proc.EvalExpressionWithCalls. EvalExpressionWithCalls will run
proc.(*EvalScope).EvalExpression in a different goroutine. This
goroutine, the 'eval' goroutine, will communicate with the main
goroutine of the debugger by means of two channels: continueRequest
and continueCompleted.
The eval goroutine evaluates the expression recursively, when
a function call is encountered it takes care of setting up the
function call on the target program and writes a request to the
continueRequest channel, this causes the 'main' goroutine to restart
the target program by calling proc.Continue.
Whenever Continue encounters a breakpoint that belongs to the
function call injection protocol (runtime.debugCallV1 and associated
functions) it writes to continueCompleted which resumes the 'eval'
goroutine.
The 'eval' goroutine takes care of implementing the function call
injection protocol.
When the expression is fully evaluated the 'eval' goroutine will
write a special message to 'continueRequest' signaling that the
expression evaluation is terminated which will cause Continue to
return to the user.
Updates #119
This change splits the BinaryInfo object into a slice of Image objects
containing information about the base executable and each loaded shared
library (note: go plugins are shared libraries).
Delve backens are supposed to call BinaryInfo.AddImage whenever they
detect that a new shared library has been loaded.
Member fields of BinaryInfo that are used to speed up access to dwarf
(Functions, packageVars, consts, etc...) remain part of BinaryInfo and
are updated to reference the correct image object. This simplifies this
change.
This approach has a few shortcomings:
1. Multiple shared libraries can define functions or globals with the
same name and we have no way to disambiguate between them.
2. We don't have a way to handle library unloading.
Both of those affect C shared libraries much more than they affect go
plugins. Go plugins can't be unloaded at all and a lot of name
collisions are prevented by import paths.
There's only one problem that is concerning: if two plugins both import
the same package they will end up with multiple definition for the same
function.
For example if two plugins use fmt.Printf the final in-memory image
(and therefore our BinaryInfo object) will end up with two copies of
fmt.Printf at different memory addresses. If a user types
break fmt.Printf
a breakpoint should be created at *both* locations.
Allowing this is a relatively complex change that should be done in a
different PR than this.
For this reason I consider this approach an acceptable and sustainable
stopgap.
Updates #865
Remove the breakpoint set in TestCallConcurrent so that it doesn't
interfere with the call injection protocol.
The fact that it can is a bug but that bug is better addressed after
PRs #1503 and #1504 are merged, this keeps tests happy in the meantime.
Fixes#1542
Before doing anything check that the version of Go is compatible with
the current version of Delve.
This will improve the error message in the case that another change as
disruptive as Go1.11 dwarf compression, happens.
