Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
Clarify that the currently supported version of the API is 2 and that
the preferred method for selecting it is sending a SetApiVersion
command after connection.
Fixes#2066
* terminal/command: Add 'reload' command
These changes add the 'reload' command, which allows us to rebuild the project
and start the debugging session again. Currently, if the project's code is
updated while debugging it, Delve shows the new source code, but it's still
running the old one. With 'reload', the whole binary is rebuilt, and the
process starts again.
Fixes#1551
* Remove unnecessary print
Changes to be committed:
modified: pkg/terminal/command.go
* Add tests and refactor the code
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: go.mod
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
* Fix typo in the comment
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typo in the name of the variables
The variables are local therefore the capitalization is not needed
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
* Call GoTestBuild
Also, remove the := to avoid redeclaration
* Change the Kind in the tests
Change from debugger.ExecutingGeneratedTest to
debugger.ExecutingGeneratedFile for consistency.
We are generating a real binary instead of a test
one so ExecutingGeneratedFile makes more sense here.
Changes to be committed:
modified: service/test/integration2_test.go
* Avoid breakpoints based on addresses
Changes to be committed:
modified: service/debugger/debugger.go
* Update the rebuild behaviour
There are a few cases where we can't rebuild the binary because we don't
know how it was build.
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typos and update documentation
Changes to be committed:
modified: Documentation/cli/README.md
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
* Fix typo
* Remove variables
They were added to the debugger.Config
* Rename variable
Rename Kind to ExecuteKind to make it more accurate
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
* cmd/dlv,debugger: Improve dlv trace and trace command output
This patch improves the `dlv trace` subcommand output by reducing the
noise that is generated and providing clearer more concise information.
Also adds new tests closing a gap in our testing (we previously never
really tested this subcommand).
This patch also fixes the `dlv trace` REPL command to behave like the
subcommand in certain situations. If the tracepoint is for a function,
we now show function arguements and return values properly.
Also makes the overall output of the trace subcommand clearer.
Fixes#2027
This flag allows users on UNIX systems to set the tty for the program
being debugged by Delve. This is useful for debugging command line
applications which need access to their own TTY, and also for
controlling the output of the debugged programs so that IDEs may open a
dedicated terminal to show the output for the process.
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
* service: also search IPv6 connections when checking user
When checking if the user is allowed to connect to this Delve instance
also search IPv6 connections even though the local address is IPv4.
Fixes#1835
* cmd: add flag to disable same-user check
Fixes#1835
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
* scripts: use relative path in gen-cli-docs.go
Makes gen-cli-docs.go work outside GOPATH.
* Documentation,cmd/dlv: tidy up --help output
The description of --log-dest, --log-output and --backend is very
verbose and messes up the output of --help, move it to two "additional
help" subcommands.
* *: Add .cirrus.yml for FreeBSD testing
* *: run go mod tidy
* service/test: prefer 127.0.0.1 over localhost
* dwarf/line: fix TestDebugLinePrologueParser
* vendor: rerun go mod vendor
* Add --continue to continue process on launch/attach
* Add small test of --continue
* regenerate usage docs
* minor cleanup
* Use similar approach to `trace` and connect and detach using a client instance
* back out previous attempt
* regen usage doc
* fix up continue test
* fix TestContinue to properly test --continue
* back out unnecessary changes
* update faq
Before doing anything check that the version of Go is compatible with
the current version of Delve.
This will improve the error message in the case that another change as
disruptive as Go1.11 dwarf compression, happens.
* *: use loglevel to control what gets logged instead of output redirection
This stops logrus from doing all the formatting just to discard it
immediately afterwards.
* logflags: replace default formatter of logrus
The default formatter of logrus emits logs in two different formats
depending on whether or not the output is going to a terminal. The
output format for non-terminals is indented to be machine readable, but
we mostly read logs ourselves and the excessive quoting makes that
format unreadable.
When outputting to terminals it uses ANSI escape codes unconditionally,
without checking whether the terminal it is connected to actually
supports colors.
This commit replaces the default formatter with a much simpler
formatter that always uses a more readable format, doesn't use colors
and places the key-value pairs at the beginning of the line (which is a
better match for how we use them).
* cmd/dlv: add command line options to redirect logs
Adds two options, --log-to-file and --log-to-fd, to redirect logs to a
file or to a file descriptor.
When one of those two options is specified the "API server listening
at:" message will also be redirected to the specified file/file
descriptor.
This allows clients that want to use the "API server listening at:"
message to do so even if they want to redirect the target's stdout to
another file or device.
Implements #1179, #1523
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
Minidumps are the windows equivalent of unix core files.
This commit updates pkg/proc/core so that it can open and read windows
minidumps.
Updates #794
This patch allows the `trace` CLI subcommand to display return values of
a function. Additionally, it will also display information on where the
function exited, which could also be helpful in determining the path
taken during function execution.
Fixes#388
Adds an --exec flag for the trace subcommand allowing users to specify a
pre-compiled binary to exec and trace.
Also adds a --test flag as a convienance for compiling and tracing a
test binary.
Fixes#1073
Fix a bug where the regexp would be used as a package string
incorrectly. This would manifest when trying to execute the trace
subcommand as `dlv trace <regexp>` without specifying a package
identifier. The `<regexp>` would be passed to the Go build command
causing an error.
Replace the socket connection with an in-memory connection (created by net.Pipe) for non-headless uses of delve.
This is faster and more secure.
Fixes#1332
This changes make `dlv` support multifile specifically when dlv `debug`,
`trace` and `test`. Just like `dlv debug a.go b.go`. Corresponding to
`go build a.go b.go`.(a.go and b.go are belong to `main` package).
Fix#984.
Use the same connect code path whether we started the server (with
debug/exec/test) or we didn't (i.e. the 'connect' subcommand).
This fixes a bug where the init file was ignored with the 'connect'
subcommand and hopefully prevents future divergence between the
behavior of 'connect' and the other subcommands.
Fixes#1301
Implements the function call injection protocol introduced in go 1.11
by https://go-review.googlesource.com/c/go/+/109699.
This is only the basic support, see TODO comments in pkg/proc/fncall.go
for a list of missing features.
Updates #119
This pull request makes several changes to delve to allow headless
instancess that are started with the --accept-multiclient flag to
keep running even if there is no connected client. Specifically:
1. Makes a headless instance started with --accept-multiclient quit
after one of the clients sends a Detach request (previously they
would never ever quit, which was a bug).
2. Changes proc/gdbserial and proc/native so that they mark the
Process as exited after they detach, even if they did not kill the
process during detach. This prevents bugs such as #1231 where we
attempt to manipulate a target process after we detached from it.
3. On non --accept-multiclient instances do not kill the target
process unless we started it or the client specifically requests
it (previously if the client did not Detach before closing the
connection we would kill the target process unconditionally)
4. Add a -c option to the quit command that detaches from the
headless server after restarting the target.
5. Change terminal so that, when attached to --accept-multiclient,
pressing ^C will prompt the user to either disconnect from the
server or pause the target process. Also extend the exit prompt to
ask if the user wants to keep the headless server running.
Implements #245, #952, #1159, #1231
Implements structured logging via Logrus. This gives us a logger per
boundry that we care about, allowing for easier parsing of logs if users
have more than one log option enabled. Also, cleans up a lot of
conditionals in the code by simply silencing the logger at creation as
opposed to conditionally logging everywhere.
We occasionally receive bug reports from users of VSCode-go and GoLand.
GoLand has its own way of capturing the packet exchange between itself
and delve but VSCode-go (supposedly) doesn't.
So far this hasn't been a problem since all bug reports were obvious
bugs on the plugin or easy to reproduce without VSCode-go, but it might
be helpful in the future to have a way to log the packet exchange
between dlv and a frontend.
This commit adds a --log-output option to enable logging of all rpc
messages and changes service/rpccommon accordingly.
Go1.11 uses the is_stmt flag of .debug_line to communicate which
assembly instructions are good places for breakpoints, we should
respect this flag.
These changes were introduced by:
* https://go-review.googlesource.com/c/go/+/102435/
Additionally when setting next breakpoints ignore all PC addresses that
belong to the same line as the one currently under at the cursor. This
matches the behavior of gdb and avoids stopping multiple times at the
heading line of a for statement with go1.11.
Change: https://go-review.googlesource.com/c/go/+/110416 adds the
prologue_end flag to the .debug_line section to communicate the end of
the stack-split prologue. We should use it instead of pattern matching
the disassembly when available.
Fixes#550
type of interfaces
'c7cde8b'.
Change the linux verison of proc/native and proc/gdbserial (with
debugserver) so that they let the target process use the terminal when
delve is launched in headless mode.
Windows already worked, proc/gdbserial (with rr) already worked.
I couldn't find a way to make proc/gdbserial (with lldb-server) work.
No tests are added because I can't think of a way to test for
foregroundness of a process.
Fixes#65
Previously to 4e177bb99acc511897f9cdbfc6cbc50d92ae4725 it was possible
to use --log without arguments to enable logging, this commit reenables
that use case.
The new functionality of the --log flag moved to a new flag name
--logx.
Fixes#1188
* command/terminal: allow restart to change process args
Add -args flag to "restart" command. For example, "restart -args a b c" will
pass args a b c to the new process.
Add "-c" flag to pass the checkpoint name. This is needed to disambiguate the
checkpoint name and arglist.
Reverted unnecessary changes.
* Applied reviewer comments.
Vendored argv.
Change the syntax of restart. When the target is is in recording mode, it always
interprets the args as a checkpoint. Otherwise, it interprets the args as
commandline args. The flag "-args" is still there, to handle the case in which
the user wants to pass an empty args on restart.
* Add restartargs.go.
Change "restart -args" to "restart -noargs" to clarify that this flag is used to
start a process with an empty arg.
* Support --output for debug, trace, and test commands
With the `--output` parameter you can configure the output binary. For
example:
dlv debug --output /tmp/xxx
Will build the binary to `/tmp/xxx`, instead of always putting it as
`debug` in the current directory.
This ensures that the command always works (even if there is already a
file or directory named `debug`) and doesn't write to the source
directory. Especially for things like Delve/Vim integration this is a
good thing to have, I think.
* Address PR feedback and add a test
- We don't need to use `filepath.IsAbs()` on startup; I added that
because it previously did `"./" + debugname` everywhere, but I don't
think that's needed at all, since `pathname` without a leading `./`
implies the current directory.
- Repurpose the existing `TestIssue398` to also test the `--output`
flag. Also fix an issue where tests wouldn't work if `GOPATH` has
multiple entries (e..g `GOPATH=$HOME/go:$HOME/mygocode`).
- Print an error if we can't remove the debug binary on exit instead of
failing silently. Not strictly related to this PR, but a good change
to add I think.
* Also warn when delve can't remove the binary in test/trace
I only added that to debug, but good to issue this warning consistently.
