Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
* terminal/command: Add 'reload' command
These changes add the 'reload' command, which allows us to rebuild the project
and start the debugging session again. Currently, if the project's code is
updated while debugging it, Delve shows the new source code, but it's still
running the old one. With 'reload', the whole binary is rebuilt, and the
process starts again.
Fixes#1551
* Remove unnecessary print
Changes to be committed:
modified: pkg/terminal/command.go
* Add tests and refactor the code
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: go.mod
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
* Fix typo in the comment
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typo in the name of the variables
The variables are local therefore the capitalization is not needed
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
* Call GoTestBuild
Also, remove the := to avoid redeclaration
* Change the Kind in the tests
Change from debugger.ExecutingGeneratedTest to
debugger.ExecutingGeneratedFile for consistency.
We are generating a real binary instead of a test
one so ExecutingGeneratedFile makes more sense here.
Changes to be committed:
modified: service/test/integration2_test.go
* Avoid breakpoints based on addresses
Changes to be committed:
modified: service/debugger/debugger.go
* Update the rebuild behaviour
There are a few cases where we can't rebuild the binary because we don't
know how it was build.
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typos and update documentation
Changes to be committed:
modified: Documentation/cli/README.md
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
* Fix typo
* Remove variables
They were added to the debugger.Config
* Rename variable
Rename Kind to ExecuteKind to make it more accurate
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
Allows Delve clients to stop a recording midway by sending a
Command('halt')
request.
This is implemented by changing debugger.New to start recording the
process on a separate goroutine while holding the processMutex locked.
By locking the processMutex we ensure that almost all RPC requests will
block until the recording is done, since we can not respond correctly
to any of them.
API calls that do not require manipulating or examining the target
process, such as "IsMulticlient", "SetApiVersion" and
"GetState(nowait=true)" will work while we are recording the process.
Two other internal changes are made to the API: both GetState and
Restart become asynchronous requests, like Command. Restart because
this way it can be interrupted by a StopRecording request if the
rerecord option is passed.
GetState because clients need a call that will block until the
recording is compelted and can also be interrupted with a
StopRecording.
Clients that are uninterested in allowing the user to stop a recording
can ignore this change, since eventually they will make a request to
Delve that will block until the recording is completed.
Clients that wish to support this feature must:
1. call GetState(nowait=false) after connecting to Delve, before any
call that would need to manipulate the target process
2. allow the user to send a StopRecording request during the initial
GetState call
3. allow the user to send a StopRecording request during any subsequent
Restart(rerecord=true) request (if supported).
Implements #1747
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
* proc: move defer breakpoint code into a function
Moves the code that sets a breakpoint on the first deferred function,
used by both next and StepOut, to its function.
* proc: implement reverse step/next/stepout
When the direction of execution is reversed (on a recording) Step, Next and
StepOut will behave similarly to their forward version. However there are
some subtle interactions between their behavior, prologue skipping, deferred
calls and normal calls. Specifically:
- when stepping backwards we need to set a breakpoint on the first
instruction after each CALL instruction, once this breakpoint is reached we
need to execute a single StepInstruction operation to reverse step into the
CALL.
- to insure that the prologue is skipped reverse next needs to check if it
is on the first instruction after the prologue, and if it is behave like
reverse stepout.
- there is no reason to set breakpoints on deferred calls when reverse
nexting or reverse stepping out, they will never be hit.
- reverse step out should generally place its breakpoint on the CALL
instruction that created the current stack frame (which will be the CALL
instruction immediately preceding the instruction at the return address).
- reverse step out needs to treat panic calls and deferreturn calls
specially.
* service,terminal: implement reverse step, next, stepout
Adds an optional scope prefix to the `regs` command which allows
printing registers for any stack frame (as long as they were somehow
saved). Issue #1838 is not yet to be closed since we are still not
recovering the registers of a segfaulting frame.
Updates #1838
According to #1800#1584#1038, `dlv` should enable the user to dive into
memory. User can print binary data in specific memory address range.
But not support for sepecific variable name or structures temporarily.(Because
I have no idea that modify `print` command.)
Close#1584.
Make the 'list' command succeed for file:line expressions that don't
map to any instruction.
Adds an argument to the FindLocations API call that makes FindLocations
return if the expression can be parsed, even if it doesn't end up
matching any instruction in debug_line.
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
Add options to start a stacktrace from the values saved in the
runtime.g struct as well as a way to disable the stackSwitch logic and
just get a normal stacktrace.
If the argument of 'source' ends in '.star' it will be interpreted as a
starlark script.
If the argument of 'source' is '-' an interactive starlark repl will be
started.
For documentation on how the starlark execution environment works see
Documentation/cli/starlark.md.
The starlark API is autogenerated from the JSON-RPC API by
script/gen-starlark-bindings.go.
In general for each JSON-RPC API a single global starlark function is
created.
When one of those functions is called (through a starlark script) the
arguments are converted to go structs using reflection. See
unmarshalStarlarkValue in pkg/terminal/starbind/conv.go.
If there are no type conversion errors the JSON-RPC call is executed.
The return value of the JSON-RPC call is converted back into a starlark
value by interfaceToStarlarkValue (same file):
* primitive types (such as integers, floats or strings) are converted
by creating the corresponding starlark value.
* compound types (such as structs and slices) are converted by wrapping
their reflect.Value object into a type that implements the relevant
starlark interfaces.
* api.Variables are treated specially so that their Value field can be
of the proper type instead of always being a string.
Implements #1415, #1443
* proc: allow simultaneous call injection to multiple goroutines
Changes the call injection code so that we can have multiple call
injections going on at the same time as long as they happen on distinct
goroutines.
* proc: fix EvalExpressionWithCalls for constant expressions
The lack of address of constant expressions would confuse EvalExpressionWithCalls
Fixes#1577
Adds initial support for plugins, this is only the code needed to keep
track of loaded plugins on linux (both native and gdbserial backend).
It does not actually implement support for debugging plugins on linux.
Updates #865
We forgot to run typecheckrpc.go periodically and it didn't work
anymore and there were some minor errors in service/rpc2/client.go.
Rewrite typecheckrpc.go using go/packages, so that it works with go1.11
and go.mod, and fix the issues in client.go
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
Instead of unconditionally returning all present goroutines,
GoroutinesInfo now allows specifying a range (start and count). In
addition to the array of goroutines and the error, it now also returns
the next goroutine to be processed, to be used as 'start' argument on
the next call, or 0 if all present goroutines have already been
processed.
This way clients can avoid eating large amounts of RAM while debugging
core dumps and processes with a exceptionally high amount of goroutines.
Fixes#1403
This patch allows the `trace` CLI subcommand to display return values of
a function. Additionally, it will also display information on where the
function exited, which could also be helpful in determining the path
taken during function execution.
Fixes#388
Replace the socket connection with an in-memory connection (created by net.Pipe) for non-headless uses of delve.
This is faster and more secure.
Fixes#1332
Adds -defer flag to the stack command that decorates the stack traces
by associating each stack frame with its deferred calls.
Reworks proc.next to use this feature instead of using proc.DeferPC,
laying the groundwork to implement #1240.
Implements the function call injection protocol introduced in go 1.11
by https://go-review.googlesource.com/c/go/+/109699.
This is only the basic support, see TODO comments in pkg/proc/fncall.go
for a list of missing features.
Updates #119
This pull request makes several changes to delve to allow headless
instancess that are started with the --accept-multiclient flag to
keep running even if there is no connected client. Specifically:
1. Makes a headless instance started with --accept-multiclient quit
after one of the clients sends a Detach request (previously they
would never ever quit, which was a bug).
2. Changes proc/gdbserial and proc/native so that they mark the
Process as exited after they detach, even if they did not kill the
process during detach. This prevents bugs such as #1231 where we
attempt to manipulate a target process after we detached from it.
3. On non --accept-multiclient instances do not kill the target
process unless we started it or the client specifically requests
it (previously if the client did not Detach before closing the
connection we would kill the target process unconditionally)
4. Add a -c option to the quit command that detaches from the
headless server after restarting the target.
5. Change terminal so that, when attached to --accept-multiclient,
pressing ^C will prompt the user to either disconnect from the
server or pause the target process. Also extend the exit prompt to
ask if the user wants to keep the headless server running.
Implements #245, #952, #1159, #1231
Displays the return values of the current function when we step out of
it after executing a step, next or stepout command.
Implementation of this feature is tricky: when the function has
returned the return variables are not in scope anymore. Implementing
this feature requires evaluating variables that are out of scope, using
a stack frame that doesn't exist anymore.
We can't calculate the address of these variables when the
next/step/stepout command is initiated either, because between that
point and the time where the stepout breakpoint is actually hit the
goroutine stack could grow and be moved to a different memory address.
* command/terminal: allow restart to change process args
Add -args flag to "restart" command. For example, "restart -args a b c" will
pass args a b c to the new process.
Add "-c" flag to pass the checkpoint name. This is needed to disambiguate the
checkpoint name and arglist.
Reverted unnecessary changes.
* Applied reviewer comments.
Vendored argv.
Change the syntax of restart. When the target is is in recording mode, it always
interprets the args as a checkpoint. Otherwise, it interprets the args as
commandline args. The flag "-args" is still there, to handle the case in which
the user wants to pass an empty args on restart.
* Add restartargs.go.
Change "restart -args" to "restart -noargs" to clarify that this flag is used to
start a process with an empty arg.
* Fix various issues detected by megacheck
I've ran honnef.co/go/tools/cmd/megacheck and fixed a few of the
things that came up there.
* Cleanup using Gogland
* service/debugger: Restore breakpoints using file:line on restart
Restoring by address can cause the breakpoint to be inserted in the
middle of an instruction if the executable file has changed.
* terminal: Warn of stale executable when printing source
This version preserves the order of requests, allows the
client to switch between API versions and introduces a
way to send notifications to the client (see TODO item at:
proc/proc_linux.go:325).
Fixes#523, #571
* proc: bugfix: StepInto can not function when temp bps exist
* terminal,service: auto-continue during next and step
Make dlv call continue automatically when a breakpoint is hit on a
different goroutine during a next or step operation.
Added API hooks to implement the other solution to this problem (cancel
the next/step operation if a different breakpoint is hit).
Fixes#387
* service/api: Removed unused fields of service/api.Function
* proc/eval: Set return variable name to input expression
* all: fine-grained control of loadValue for better variable printing
Makes proc.(*Variable).loadValue loading parameters configurable
through one extra argument of type LoadConfig.
This interface is also exposed through the API so clients can control
how much of a variable delve should read.
New API version with better backwards compatibility plus mechanism to
select the API version that a headless instance should use.
Adds service/test/cmd/typecheckrpc.go to type check the RPC interface.
