Adds field to breakpoint struct to track how a breakpoint was
originally set, moves the logic for disabling and enabling a breakpoint
to proc.
This will allow creating suspended breakpoints that are automatically
enabled when a plugin is loaded. When follow exec mode is implemented
it will also be possible to automatically enable breakpoints (whether
or not they were suspended) on new child processes, as they are
spawned.
It also improves breakpoint restore after a restart, before this after
a restart breakpoints would be re-enabled using their file:line
position, for breakpoints set using a function name or a location
expression this could be the wrong location after a recompile.
Updates #1653
Updates #2551
Go 1.20 switched to uint64 to represent goroutine IDs, we can't
actually follow suit because we have allowed clients to use -1 to refer
to the currently selected goroutine, however we should at least switch
to int64 and also update the rtype check to accept the 1.20 type.
Go 1.19 also formats doc comments according to the new godoc syntax.
Some of our comments, especially unexported symbols did not conform to
the godoc syntax and therefore are mangled by 'go fmt'.
This PR runs 'go fmt' from go1.19 on everything and manually fixes the
problems.
See also:
https://github.com/golang/proposal/blob/master/design/51082-godocfmt.md
Adds a LogicalBreakpoint type to represent logical breakpoints
explicitly. Until now logical breakpoints were constructed implicitly
by grouping physical breakpoints together by their LogicalID.
Having logical breakpoints represented explicitly allows for a simpler
implementation of disabled breakpoints, as well as allowing a simple
implementation of delayed breakpoints (#1653, #2551) and in general of
breakpoints spanning multiple processes if we implement debugging
process trees (#2551).
Updates #1653
Updates #2551
* service: Implement BuildID
Parse the BuildID of executables and provides it over the RPC
service.
Signed-off-by: Morten Linderud <morten@linderud.pw>
* command: Support debuinfod for file listing
Signed-off-by: Morten Linderud <morten@linderud.pw>
* debuginfod: create debuginfod package for common code
We remove the duplicated code and provide our a new debuginfod package.
Signed-off-by: Morten Linderud <morten@linderud.pw>
* starlark: Workaround for 'build_i_d'
Signed-off-by: Morten Linderud <morten@linderud.pw>
* command: Ensure we only overwrite path when one has been found
Signed-off-by: Morten Linderud <morten@linderud.pw>
* bininfo: Inline parseBuildID
Signed-off-by: Morten Linderud <morten@linderud.pw>
* terminal,service: add way to see internal breakpoints
Now that Delve has internal breakpoints that survive for long periods
of time it will be useful to have an option to display them.
* proc,terminal,service: support stack watchpoints
Adds support for watchpoints on stack allocated variables.
When a stack variable is watched, in addition to the normal watchpoint
some support breakpoints are created:
- one breakpoint inside runtime.copystack, used to adjust the address
of the watchpoint when the stack is resized
- one or more breakpoints used to detect when the stack variable goes
out of scope, those are similar to the breakpoints set by StepOut.
Implements #279
The slice `out.List` is created with a length of 0 but a capacity of
`len(imgs)`. This causes the line below to panic as we try to index into
the `out.List` slice instead of append to it. This patch resolves the
issue by appending instead of indexing into the slice.
Co-authored-by: Derek Parker <deparker@redhat.com>
* proc: support new Go 1.17 panic/defer mechanism
Go 1.17 will create wrappers for deferred calls that take arguments.
Change defer reading code so that wrappers are automatically unwrapped.
Also the deferred function is called directly by runtime.gopanic, without going through runtime.callN which means that sometimes when a panic happens the stack is either:
0. deferred function call
1. deferred call wrapper
2. runtime.gopanic
or:
0. deferred function call
1. runtime.gopanic
instead of always being:
0. deferred function call
1. runtime.callN
2. runtime.gopanic
the isPanicCall check is changed accordingly.
* test: miscellaneous minor test fixes for Go 1.17
* proc: resolve inlined calls when stepping out of runtime.breakpoint
Calls to runtime.Breakpoint are inlined in Go 1.17 when inlining is
enabled, resolve inlined calls in stepInstructionOut.
* proc: add support for debugCallV2 with regabi
This change adds support for the new debug call protocol which had to
change for the new register ABI introduced in Go 1.17.
Summary of changes:
- Abstracts over the debug call version depending on the Go version
found in the binary.
- Uses R12 instead of RAX as the debug protocol register when the binary
is from Go 1.17 or later.
- Creates a variable directly from the DWARF entry for function
arguments to support passing arguments however the ABI expects.
- Computes a very conservative stack frame size for the call when
injecting a call into a Go process whose version is >=1.17.
Co-authored-by: Michael Anthony Knyszek <mknyszek@google.com>
Co-authored-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
* TeamCity: enable tests on go-tip
* goversion: version compatibility bump
* TeamCity: fix go-tip builds on macOS/arm64
Co-authored-by: Michael Anthony Knyszek <mknyszek@google.com>
Adds filtering and grouping to the goroutines command.
The current implementation of the goroutines command is modeled after
the threads command of gdb. It works well for programs that have up to
a couple dozen goroutines but becomes unusable quickly after that.
This commit adds the ability to filter and group goroutines by several
different properties, allowing a better debugging experience on
programs that have hundreds or thousands of goroutines.
The existing documentation was a little light on details. This patch
gives more insight into how the argument to this function is used and
interpreted.
* service/rpc2,service/debugger: more doc updates
Combine debugger.CreateBreakpoint documentation with the documentation
that already existed for the rpc2 server CreateBreakpoint method.
Also adds more contextual information for both the server and client
with links to debugger.CreateBreakpoint documentation.
* pkg/proc: implement support for hit count breakpoints
* update comment
* udpate hitcount comment
* update HitCond description
* add test for hit condition error
* respond to review
* service/dap: add support for hit count breakpoints
* use amendbps to preserve hit counts
* update test health doc
* fix failing test
* simplify hit conditions
* REmove RequestString, use name instead
* update backend_test_health.md
* document hit count cond
* fix tests
* service/rpcommon: resolve race between Detach and shutdown
Detach will close DisconnectChan causing the server to initiate
shutdown, there is a race between Detach writing its response to the
client and the shutdown terminating the server process.
If Detach loses the race the response to the Detach request is never
sent to the client and the client will report an EOF error instead.
This change delays the start of the shutdown process until after Detach
has written its response.
Fixes an occasional failure of TestContinue.
* service/rpccommon: ignore listener error when shutting down
Ignore the closed listener error when the server is being shut down in
response to a SIGINT signal.
Fixes#1633
* Adds toggle command
Also adds two rpc2 tests for testing the new functionality
* Removes Debuggers' ToggleBreakpoint method
rpc2's ToggleBreakpoint now calls AmendBreakpoint
Refactors the ClearBreakpoint to avoid a lock.
* service: serialize calls to Command API
Wait until the target process has resumed before accepting new calls to
Command. Before this if a 'continue' was immediately followed by a
'halt' the 'halt' could be processed before the 'continue'.
Fixes#1608Fixes#2216
* service/rpccommon: fix DeepSource issues
* proc/core: off-by-one error reading ELF core files
core.(*splicedMemory).ReadMemory checked the entry interval
erroneously when dealing with contiguous entries.
* terminal,service,proc/*: adds dump command (gcore equivalent)
Adds the `dump` command that creates a core file from the target process.
Backends will need to implement a new, optional, method `MemoryMap` that
returns a list of mapped memory regions.
Additionally the method `DumpProcessNotes` can be implemented to write out
to the core file notes describing the target process and its threads. If
DumpProcessNotes is not implemented `proc.Dump` will write a description of
the process and its threads in a OS/arch-independent format (that only Delve
understands).
Currently only linux/amd64 implements `DumpProcessNotes`.
Core files are only written in ELF, there is no minidump or macho-o writers.
# Conflicts:
# pkg/proc/proc_test.go
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
* service/*: remove threadID argument of (*Debugger).PackageVariables
Which thread is used doesn't make any difference to the list of package
variables that is returned and this option was only ever used by an old
v1 API call.
Move the conversion of some 'proc' types from service/debugger into
service/rpc1 and service/rpc2. The methods of
service/debugger.(*Debugger) are also used by service/dap which
requires these types to be converted differently and converting them
twice is inefficent and doesn't make much sense.
Updates #2161
Since proc is supposed to work independently from the target
architecture it shouldn't use architecture-dependent types, like
uintptr. For example when reading a 64bit core file on a 32bit
architecture, uintptr will be 32bit but the addresses proc needs to
represent will be 64bit.
Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
* terminal/command: Add 'reload' command
These changes add the 'reload' command, which allows us to rebuild the project
and start the debugging session again. Currently, if the project's code is
updated while debugging it, Delve shows the new source code, but it's still
running the old one. With 'reload', the whole binary is rebuilt, and the
process starts again.
Fixes#1551
* Remove unnecessary print
Changes to be committed:
modified: pkg/terminal/command.go
* Add tests and refactor the code
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: go.mod
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
* Fix typo in the comment
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typo in the name of the variables
The variables are local therefore the capitalization is not needed
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
* Call GoTestBuild
Also, remove the := to avoid redeclaration
* Change the Kind in the tests
Change from debugger.ExecutingGeneratedTest to
debugger.ExecutingGeneratedFile for consistency.
We are generating a real binary instead of a test
one so ExecutingGeneratedFile makes more sense here.
Changes to be committed:
modified: service/test/integration2_test.go
* Avoid breakpoints based on addresses
Changes to be committed:
modified: service/debugger/debugger.go
* Update the rebuild behaviour
There are a few cases where we can't rebuild the binary because we don't
know how it was build.
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typos and update documentation
Changes to be committed:
modified: Documentation/cli/README.md
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
* Fix typo
* Remove variables
They were added to the debugger.Config
* Rename variable
Rename Kind to ExecuteKind to make it more accurate
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
Allows Delve clients to stop a recording midway by sending a
Command('halt')
request.
This is implemented by changing debugger.New to start recording the
process on a separate goroutine while holding the processMutex locked.
By locking the processMutex we ensure that almost all RPC requests will
block until the recording is done, since we can not respond correctly
to any of them.
API calls that do not require manipulating or examining the target
process, such as "IsMulticlient", "SetApiVersion" and
"GetState(nowait=true)" will work while we are recording the process.
Two other internal changes are made to the API: both GetState and
Restart become asynchronous requests, like Command. Restart because
this way it can be interrupted by a StopRecording request if the
rerecord option is passed.
GetState because clients need a call that will block until the
recording is compelted and can also be interrupted with a
StopRecording.
Clients that are uninterested in allowing the user to stop a recording
can ignore this change, since eventually they will make a request to
Delve that will block until the recording is completed.
Clients that wish to support this feature must:
1. call GetState(nowait=false) after connecting to Delve, before any
call that would need to manipulate the target process
2. allow the user to send a StopRecording request during the initial
GetState call
3. allow the user to send a StopRecording request during any subsequent
Restart(rerecord=true) request (if supported).
Implements #1747
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
Adds an optional scope prefix to the `regs` command which allows
printing registers for any stack frame (as long as they were somehow
saved). Issue #1838 is not yet to be closed since we are still not
recovering the registers of a segfaulting frame.
Updates #1838
According to #1800#1584#1038, `dlv` should enable the user to dive into
memory. User can print binary data in specific memory address range.
But not support for sepecific variable name or structures temporarily.(Because
I have no idea that modify `print` command.)
Close#1584.
Adds an API call that returns a list of packages contained in the
program and the files that were used to build them, and also a best
guess at which filesystem directory contained the package when it was
built.
This can be used by IDEs to map file paths if the debugging environment
doesn't match the build environment exactly.
Changes CreateBreakpoint to create a logical breakpoint when multiple
addresses are specified, FindLocation and the api.Location type to
return logical locations and the cli to support logical breakpoints.
Make the 'list' command succeed for file:line expressions that don't
map to any instruction.
Adds an argument to the FindLocations API call that makes FindLocations
return if the expression can be parsed, even if it doesn't end up
matching any instruction in debug_line.
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
Add options to start a stacktrace from the values saved in the
runtime.g struct as well as a way to disable the stackSwitch logic and
just get a normal stacktrace.
The location specified '<fnname>:0' could be used to set a breakpoint
on the entry point of the function (as opposed to locspec '<fnname>'
which sets it after the prologue).
Setting a breakpoint on an entry point is almost never useful, the way
this feature was implemented could cause it to be used accidentally and
there are other ways to accomplish the same task (by setting a
breakpoint on the PC address directly).
Adds initial support for plugins, this is only the code needed to keep
track of loaded plugins on linux (both native and gdbserial backend).
It does not actually implement support for debugging plugins on linux.
Updates #865
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
Instead of unconditionally returning all present goroutines,
GoroutinesInfo now allows specifying a range (start and count). In
addition to the array of goroutines and the error, it now also returns
the next goroutine to be processed, to be used as 'start' argument on
the next call, or 0 if all present goroutines have already been
processed.
This way clients can avoid eating large amounts of RAM while debugging
core dumps and processes with a exceptionally high amount of goroutines.
Fixes#1403
This patch allows the `trace` CLI subcommand to display return values of
a function. Additionally, it will also display information on where the
function exited, which could also be helpful in determining the path
taken during function execution.
Fixes#388
Add a flag to Stackframe that indicates where the stack frame is the
bottom-most frame of the stack. This allows clients to know whether the
stack trace terminated normally or if it was truncated because the
maximum depth was reached.
Add a truncation message to the 'stack' command.
Adds -defer flag to the stack command that decorates the stack traces
by associating each stack frame with its deferred calls.
Reworks proc.next to use this feature instead of using proc.DeferPC,
laying the groundwork to implement #1240.
This pull request makes several changes to delve to allow headless
instancess that are started with the --accept-multiclient flag to
keep running even if there is no connected client. Specifically:
1. Makes a headless instance started with --accept-multiclient quit
after one of the clients sends a Detach request (previously they
would never ever quit, which was a bug).
2. Changes proc/gdbserial and proc/native so that they mark the
Process as exited after they detach, even if they did not kill the
process during detach. This prevents bugs such as #1231 where we
attempt to manipulate a target process after we detached from it.
3. On non --accept-multiclient instances do not kill the target
process unless we started it or the client specifically requests
it (previously if the client did not Detach before closing the
connection we would kill the target process unconditionally)
4. Add a -c option to the quit command that detaches from the
headless server after restarting the target.
5. Change terminal so that, when attached to --accept-multiclient,
pressing ^C will prompt the user to either disconnect from the
server or pause the target process. Also extend the exit prompt to
ask if the user wants to keep the headless server running.
Implements #245, #952, #1159, #1231
