* _scripts/test_linux.sh,_scripts/test_windows.ps1: always return exit code 0 when testing on tip
Same as what we do for test_mac.sh
* proc: support function call injection on arm64
Support function call injection on arm64 with go1.19
Fix signal handling during thread single stepping so that signals that
are generated by executing the current instruction are immediately
propagated to the inferior, while signals other signals sent to the
thread are delayed until the full resume happens.
Fixes a bug where a breakpoint set on an instruction that causes a
SIGSEGV would make Delve hang and a bug where signals received during
single step would make it look like an instruction is executed twice.
Fixes#2801Fixes#2792
Debugserver has a bug where writing to a AVX-2 or AVX-512 register does
not work unless it is followed by at least a write to a AVX (not 2 or
512) register.
See also: https://bugs.llvm.org/show_bug.cgi?id=52362Fixes#2767
Normally calls can't be performed on recorded processes, becuase the
future instructions executed by the target are predetermined. The rr
debugger however has a mechanism that allows this by taking the current
state of the recording and allowing it to diverge from the recording,
temporarily.
This commit adds support for starting and ending such diversions around
function calls.
Note: this requires rr version 5.5 of later to work, see:
https://github.com/rr-debugger/rr/pull/2748
Adds watchpoint support to gdbserver backend for rr debugger and
debugserver on macOS/amd64 and macOS/arm64.
Also changes stack watchpoints to support reverse execution.
Adds DWARF register number and support for AVX-512 registers.
Changes proc/gdbserial so that the 'g' and 'G' commands are never used
with debugserver since they seem to corrupt the thread state when used
on AVX-512 capable hardware.
Also changes TestClientServer_FpRegisters to be simpler and more
resilient to changes to the Go runtime.
Fixes#2479
* proc/core: off-by-one error reading ELF core files
core.(*splicedMemory).ReadMemory checked the entry interval
erroneously when dealing with contiguous entries.
* terminal,service,proc/*: adds dump command (gcore equivalent)
Adds the `dump` command that creates a core file from the target process.
Backends will need to implement a new, optional, method `MemoryMap` that
returns a list of mapped memory regions.
Additionally the method `DumpProcessNotes` can be implemented to write out
to the core file notes describing the target process and its threads. If
DumpProcessNotes is not implemented `proc.Dump` will write a description of
the process and its threads in a OS/arch-independent format (that only Delve
understands).
Currently only linux/amd64 implements `DumpProcessNotes`.
Core files are only written in ELF, there is no minidump or macho-o writers.
# Conflicts:
# pkg/proc/proc_test.go
During the testing of the core dump generation feature two bugs were
discovered in gdbserial:
1. we don't check that both bytes of the checksum are read, if the
buffer only has one byte we can end up reading only one byte instead
of two and the second byte will mess up the parsing of the next
packet
2. binary encoded packets can start with an 'E' and not be errors, when
using binary responses add an extra check for the lenght of the
response before deciding that the response is an error.
Unfortunately this encoding is inherently ambiguous (we can't
distinguish a 3 byte response starting with 'E' from an error) so
binary requests that lead to short responses should be avoided.
Testing this is complicated, they will be tested implicitly by the
upcoming core dump test.
Co-authored-by: a <a@kra>
Since proc is supposed to work independently from the target
architecture it shouldn't use architecture-dependent types, like
uintptr. For example when reading a 64bit core file on a 32bit
architecture, uintptr will be 32bit but the addresses proc needs to
represent will be 64bit.
* tests: misc test fixes for go1.14
- math.go is now ambiguous due to changes to the go runtime so specify
that we mean our own math.go in _fixtures
- go list -m requires vendor-mode to be disabled so pass '-mod=' to it
in case user has GOFLAGS=-mod=vendor
- update version of go/packages, required to work with go 1.14 (and
executed go mod vendor)
- Increased goroutine migration in one development version of Go 1.14
revealed a problem with TestCheckpoints in command_test.go and
rr_test.go. The tests were always wrong because Restart(checkpoint)
doesn't change the current thread but we can't assume that when the
checkpoint was taken the current goroutine was running on the same
thread.
* goversion: update maximum supported version
* Makefile: disable testing lldb-server backend on linux with Go 1.14
There seems to be some incompatibility with lldb-server version 6.0.0
on linux and Go 1.14.
* proc/gdbserial: better handling of signals
- if multiple signals are received simultaneously propagate all of them to the
target threads instead of only one.
- debugserver will drop an interrupt request if a target thread simultaneously
receives a signal, handle this situation.
* dwarf/line: normalize backslashes for windows executables
Starting with Go 1.14 the compiler sometimes emits backslashes as well
as forward slashes in debug_line, normalize everything to / for
conformity with the behavior of previous versions.
* proc/native: partial support for Windows async preempt mechanism
See https://github.com/golang/go/issues/36494 for a description of why
full support for 1.14 under windows is problematic.
* proc/native: disable Go 1.14 async preemption on Windows
See https://github.com/golang/go/issues/36494
Instead of just sending unhandled signals back to the process send them
to the specific thread that received them.
This is important because:
1. debugserver does not appear to support the vCont;CXX packet without
specifying a target thread
2. the non-cooperative preemption change in an upcoming version of Go
(1.15?) will require sending signals to a specific thread.
Fixes#1744
Propagate signals when stepping because debugserver will report them,
from the issue:
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $z0,105525d,1#c9
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $OK#00
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $vCont;s:c41c3#50
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $T1cthread:c41c3;threads:c41c3,c41d7,c41d8,c41d9,c41da;thread-pcs:105525d,7fffc464bf46,7fffc464bbf2,7fffc464bbf2,7fffc46...
2019-07-11T16:31:25+02:00 debug layer=gdbconn <- $Z0,105525d,1#a9
2019-07-11T16:31:25+02:00 debug layer=gdbconn -> $OK#00
in this case we request a single step on thread c41c3 but debugserver
reports instead a signal (in this case SIGWINCH).
Fixes#1610
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
Support for position independent executables (PIE) on the native linux
backend, the gdbserver backend on linux and the core backend.
Also implemented in the windows native backend, but it can't be tested
because go doesn't support PIE on windows yet.
Fncall.go was written with the assumption that the object returned by
proc.Thread.Registers does not change after we call
proc.Thread.SetPC/etc.
This is true for the native backend but not for gdbserial. I had
anticipated this problem and introduced the Save/SavedRegisters
mechanism during the first implementation of fncall.go but that's
insufficient.
Instead:
1. clarify that the object returned by proc.Thread.Registers could
change when the CPU registers are modified.
2. add a Copy method to Registers that returns a copy of the registers
that are guaranteed not to change when the CPU registers change.
3. remove the Save/SavedRegisters mechanism.
This solution leaves us the option, in the future, to cache the output
of proc.(Thread).Registers, avoiding a system call every time it's
called.
Setting the Level field of a logrus logger doesn't actually do anything
since the Level field simply reports the log level of the last log
message emitted on the logger.
The right way to do that is to set logger.Logger.Level.
Also cleans up newline characters from log messages emitted through
logrus and fixes the direction of the arrows in the messages emitted by
rpccommon, which was inconsistent with the arrows of gdbserial.
Go1.11 switched to the zlib-gnu compression format for debug sections.
Change proc and and a test in dwarf/line to support this change.
Also deletes some dead code from pkg/proc/bininfo.go that hadn't been
used in a long time.
Implements structured logging via Logrus. This gives us a logger per
boundry that we care about, allowing for easier parsing of logs if users
have more than one log option enabled. Also, cleans up a lot of
conditionals in the code by simply silencing the logger at creation as
opposed to conditionally logging everywhere.
debugserver doesn't support qXfer:exec-file:read, and it doesn't return
the executable path in the response to qProcessInfoPID, however we can
find out the executable path by using jGetLoadedDynamicLibrariesInfos.
* proc: fix interaction of RequestManualStop and conditional breakpoints
A conditional breakpoint that is hit but has the condition evaluate to
false can block a RequestManualStop from working. If the conditional
breakpoint is set on an instruction that is executed very frequently by
multiple goroutines (or many conditional breakpoints are set) it could
prevent all calls to RequestManualStop from working.
This commit fixes the problem by changing proc.Continue to exit
unconditionally after a RequestManualStop is called.
* proc/gdbserial: fix ContinueOnce getting stuck on macOS
Fixes#902
* Fix various issues detected by megacheck
I've ran honnef.co/go/tools/cmd/megacheck and fixed a few of the
things that came up there.
* Cleanup using Gogland
Implementing proc.Process.Running in a thread safe way is complicated
and nothing actually uses it besides tests, so we are better off
rewriting the tests without Running and removing it.
In particular:
* The call to d.target.Running() in service/debugger/debugger.go
(Restart) can never return true because that line executes while
holding processMutex and all continue operations are also executed
while holding processMutex.
* The call to dbp.Running() pkg/proc/native/proc.go (Detach) can never
return true, because it's only called from
debugger.(*Debugger).detach() which is also always called while
holding processMutex.
Since some tests are hard to write correctly without Process.Running a
simpler interface, Process.NotifyResumed, is introduced.
Fixes#830
