proc.Next and proc.Step will call, after setting their temp
breakpoints, curthread.SetCurrentBreakpoint. This is intended to find
if one of the newly created breakpoints happens to be at the same
instruction that curthread is stopped at.
However SetCurrentBreakpoint is intended to be called after a Continue
and StepInstruction operation so it will also detect if curthread is
stopped one byte after a breakpoint.
If the instruction immediately preceeding the current instruction of
curthread happens to:
1. have one of the newly created temp breakpoints
2. be one byte long
SetCurrentBreakpoint will believe that we just hit that breakpoint and
therefore the instruction should be repeated, and thus rewind the PC of
curthread by 1.
We should distinguish between the two uses of SetCurrentBreakpoint and
disable the check for "just hit" breakpoints when inappropriate.
Fixes#1656
RestoreRegisters on linux would also restore FS_BASE and GS_BASE, if
the target goroutine migrated to a different thread during the call
injection this would result in two threads of the target process
pointing to the same TLS area which would greatly confuse the target
runtime, leading to fatal panics with nonsensical stack traces.
Other backends are unaffected:
- native/windows doesn't store the TLS in the same CONTEXT struct as
the other register values.
- native/darwin doesn't support function calls (and wouldn't store the
TLS value in the same struct)
- gdbserial/rr doesn't support function calls (because it's a
recording)
- gsdbserial/lldb extracts the value of TLS by executing code in the
target process.
Adds initial support for plugins, this is only the code needed to keep
track of loaded plugins on linux (both native and gdbserial backend).
It does not actually implement support for debugging plugins on linux.
Updates #865
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
If proc.Step encounters a CALL instruction that points to an address
that isn't associated with any function it should still follow the
CALL.
The circumstances creating this problem do not normally occur, it was
encountered in the process of fixing a bug created by Go1.12.
This patch is a slight refactor to share more code used for genericprocess initialization. There will always be OS/backend specificinitialization, but as much as can be shared should be to preventduplicating of any logic (setting internal breakpoints, loading bininfo,etc).
The linux version of proc/native and proc/core contained largely
overlapping implementations of the register handling code, deduplicate
it by moving it into proc/linutil.
Some libraries (for example steam_api64.dll) will send this exception
code to set the thread name on Microsoft VisualC.
In theory it should be fine to send the exception back to the target,
which is responsible for setting a handler for it, in practice in some
cases (steam_api64.dll) this will crash the program. So we'll mask it
instead.
Fixes#1383
Support for position independent executables (PIE) on the native linux
backend, the gdbserver backend on linux and the core backend.
Also implemented in the windows native backend, but it can't be tested
because go doesn't support PIE on windows yet.
On macOS 10.14 Apple changed the command line tools so that system
headers now need to be manually installed.
Instead of adding one extra install step to the install procedure add a
build tag to allow compilation of delve without the native backend on
macOS. By default (i.e. when using `go get`) this is how delve will be
compiled on macOS, the make script is changed to enable compiling the
native backend if the required dependencies have been installed.
Insure that both configuration still build correctly on Travis CI and
change the documentation to describe how to compile the native backend
and that it isn't normally needed.
Fixes#1359
Fncall.go was written with the assumption that the object returned by
proc.Thread.Registers does not change after we call
proc.Thread.SetPC/etc.
This is true for the native backend but not for gdbserial. I had
anticipated this problem and introduced the Save/SavedRegisters
mechanism during the first implementation of fncall.go but that's
insufficient.
Instead:
1. clarify that the object returned by proc.Thread.Registers could
change when the CPU registers are modified.
2. add a Copy method to Registers that returns a copy of the registers
that are guaranteed not to change when the CPU registers change.
3. remove the Save/SavedRegisters mechanism.
This solution leaves us the option, in the future, to cache the output
of proc.(Thread).Registers, avoiding a system call every time it's
called.
If we send a process to foreground while the headless instance may get
a SIGTTOU/SIGTTIN, if not ignored this signal will stop the headless.
It's not clear why this only happens the second time we do this but
that's how it is.
Also removes the direct syscall to TIOCSPGRP and lets the go runtime do
it instead.
Fixes#1279
Implements the function call injection protocol introduced in go 1.11
by https://go-review.googlesource.com/c/go/+/109699.
This is only the basic support, see TODO comments in pkg/proc/fncall.go
for a list of missing features.
Updates #119
This pull request makes several changes to delve to allow headless
instancess that are started with the --accept-multiclient flag to
keep running even if there is no connected client. Specifically:
1. Makes a headless instance started with --accept-multiclient quit
after one of the clients sends a Detach request (previously they
would never ever quit, which was a bug).
2. Changes proc/gdbserial and proc/native so that they mark the
Process as exited after they detach, even if they did not kill the
process during detach. This prevents bugs such as #1231 where we
attempt to manipulate a target process after we detached from it.
3. On non --accept-multiclient instances do not kill the target
process unless we started it or the client specifically requests
it (previously if the client did not Detach before closing the
connection we would kill the target process unconditionally)
4. Add a -c option to the quit command that detaches from the
headless server after restarting the target.
5. Change terminal so that, when attached to --accept-multiclient,
pressing ^C will prompt the user to either disconnect from the
server or pause the target process. Also extend the exit prompt to
ask if the user wants to keep the headless server running.
Implements #245, #952, #1159, #1231
Displays the return values of the current function when we step out of
it after executing a step, next or stepout command.
Implementation of this feature is tricky: when the function has
returned the return variables are not in scope anymore. Implementing
this feature requires evaluating variables that are out of scope, using
a stack frame that doesn't exist anymore.
We can't calculate the address of these variables when the
next/step/stepout command is initiated either, because between that
point and the time where the stepout breakpoint is actually hit the
goroutine stack could grow and be moved to a different memory address.
Add a new method "Common" to proc.Process that returns a pointer to a
struct that pkg/proc can use to store its things, independently of the
backend.
This is used here to replace the AllGCache typecasts, it will also be
used to store the return values of the stepout breakpoint and the state
for injected function calls.
Change the linux verison of proc/native and proc/gdbserial (with
debugserver) so that they let the target process use the terminal when
delve is launched in headless mode.
Windows already worked, proc/gdbserial (with rr) already worked.
I couldn't find a way to make proc/gdbserial (with lldb-server) work.
No tests are added because I can't think of a way to test for
foregroundness of a process.
Fixes#65
If a breakpoint is hit close to process death on a thread that isn't
the group leader the process could die while we are trying to stop it.
This can be easily reproduced by having the goroutine that's executing
main.main (which will almost always run on the thread group leader)
wait for a second goroutine before exiting, then setting a breakpoint
on the second goroutine and stepping through it (see TestIssue1101 in
proc_test.go).
When stepping over the return instruction of main.f the deferred
wg.Done() call will be executed which will cause the main goroutine to
resume and proceed to exit. Both the temporary breakpoint on wg.Done
and the temporary breakpoint on the return address of main.f will be in
close proximity to main.main calling os.Exit() and causing the death of
the thread group leader.
Under these circumstances the call to native.(*Thread).waitFast in
native.(*Thread).halt can hang forever due to a bug similar to
https://sourceware.org/bugzilla/show_bug.cgi?id=12702 (see comment in
native.(*Thread).wait for an explanation).
Replacing waitFast with a normal wait work in most circumstances,
however, besides the performance hit, it looks like in this
circumstances trapWait sometimes receives a spurious SIGTRAP on the
dying group leader which would cause the subsequent call to wait in
halt to accidentally reap the process without noting that it did exit.
Instead this patch removes the call to wait from halt and instead calls
trapWait in a loop in setCurrentBreakpoints until all threads are set
to running=false. This is also a better fix than the workaround to
ESRCH error while setting current breakpoints implemented in 94b50d.
Fixes#1101
* Handle race between fork and task_for_pid
On macOS a call to fork and a subsequent call to task_for_pid will race each other. This is because the macOS kernel assigns a new proc_t structure early but the new task, thread and uthread come much later. The function exec_mach_imgact in the XNU sources contains this logic.
In a system under load or one with delays in fork processing (i.e. various security software), task_for_pid as currently called by Delve often returns the parent task. This can be seen by printing out the task number around line 86. In a normal system we would see three calls:
-> ~/go/bin/dlv --listen=localhost:59115 --headless=true --api-version=2 --backend=native exec ./___main_go --
Task: 9731
Task: 9731
Task: 9731
API server listening at: 127.0.0.1:59115
This is the result on a system where the race is lost:
-> ~/go/bin/dlv --listen=localhost:59115 --headless=true --api-version=2 --backend=native exec ./___main_go --
Task: 8707
Task: 10499
Task: 10499
could not launch process: could not get thread count
In this latter case, task 8707 is the parent task. The child task of 10499 was desired and hence the error.
This code change checks to make sure the returned task is not that of the parent. If it is, it retries. It's possible other macOS reported Delve issues are the result of this failed race.
* proc: correct formatting
Either the CPU or the kernel may not support the calls we do when
retrieving floating point registers, this isn't an error we should
propagate.
Also improve the error reporint of pkg/proc/native.fpRegisters.
Fixes#1022
Conditional breakpoints with unmet conditions would cause next and step
to skip the line.
This breakpoint changes the Kind field of proc.Breakpoint from a single
value to a bit field, each breakpoint object can represent
simultaneously a user breakpoint and one internal breakpoint (of which
we have several different kinds).
The breakpoint condition for internal breakpoints is stored in the new
internalCond field of proc.Breakpoint so that it will not conflict with
user specified conditions.
The breakpoint setting code is changed to allow overlapping one
internal breakpoint on a user breakpoint, or a user breakpoint on an
existing internal breakpoint. All other combinations are rejected. The
breakpoint clearing code is changed to clear the UserBreakpoint bit and
only remove the phisical breakpoint if no other bits are set in the
Kind field. ClearInternalBreakpoints does the same thing but clearing
all bits that aren't the UserBreakpoint bit.
Fixes#844
Move some duplicate code, related to breakpoints, that was in both
backends into a single place.
This is in preparation to solve issue #844 (conditional breakpoints
make step and next fail) which will make this common breakpoint code
more complicated.
A thread could terminate between the point when we stop for a
breakpoint and the point where we send a stop signal to all threads, if
this happens setCurrentBreakpoints will fail with an error.
We should tolerate this.
For some reason this happens very frequently when running delve on
processes with the race detector enabed.
On macOS we can also stop when we receive a signal,
propagate this reason upwards to the client.
Also clear internal breakpoints after an unrecovered-panic since they
can not be reached anymore.
Fixes#872
While we are waiting for the process to exit in native.(*Process).Kill
we could receive queued exception events, those must be continued or
the wait will never finish.
Instead of panicing for sending on a closed channel, detect that the
process has exited and return a proper error message.
This patch also cleans up some spots where the Pid is omitted from the
error.
Fixes#920
* proc/native: make sure debugged executable can be deleted on windows
Delve opens debugged executable to read binary info it
contains, but it never closes the file. Windows will not
let you delete file that is opened. So close Process.bi
in Process.postExit, and actually call Process.postExit
from windows Process.Kill.
Also Windows sends some debugging events
(EXIT_PROCESS_DEBUG_EVENT event in particular) after Delve
calls TerminateProcess. The events need to be consumed by
debugger before debugged process will be released by
Windows. So call Process.waitForDebugEvent after
TerminateProcess in Process.Kill.
Fixes#398
* cmd/dlv: make TestIssue398 pass on darwin
* cmd/dlv: add comment for TestIssue398
* proc/native: wait for debuggee to exit before returning from windows Process.Kill
* proc/native: close process handle before returning from windows killProcess
* proc/native: remove not used Process.Process
When stepping through runtime sometimes the current goroutine will
change. It is impossible to handle this in Next, Step and StepOut but
StepInstruction can reset the current goroutine correctly.
* proc: fix interaction of RequestManualStop and conditional breakpoints
A conditional breakpoint that is hit but has the condition evaluate to
false can block a RequestManualStop from working. If the conditional
breakpoint is set on an instruction that is executed very frequently by
multiple goroutines (or many conditional breakpoints are set) it could
prevent all calls to RequestManualStop from working.
This commit fixes the problem by changing proc.Continue to exit
unconditionally after a RequestManualStop is called.
* proc/gdbserial: fix ContinueOnce getting stuck on macOS
Fixes#902
