As we parse this informatin in the loop we must take care to assemble
things correctly. In this situation when we encounter a file name,
the dir index is -1, then subsequently we get the correct dir index
for that file and can put them together. Previously we were adding the
file and then the directory location to the file list instead of
correctly concatenating them, resulting in an incorrect file list making
indexing into the list return incorrect results later on.
We don't do anything with the personality function so there is no point
in complaining that we don't fully support the pointer encoding flags
used to describe it.
This matches the current level of support of pointer encodings in gdb
(they are discarded when reading the personality function and not
supported for FDEs because gcc doesn't generate them).
Fixes#3015
Go 1.19 also formats doc comments according to the new godoc syntax.
Some of our comments, especially unexported symbols did not conform to
the godoc syntax and therefore are mangled by 'go fmt'.
This PR runs 'go fmt' from go1.19 on everything and manually fixes the
problems.
See also:
https://github.com/golang/proposal/blob/master/design/51082-godocfmt.md
Change debug_info type reader and proc to convert parametric types into
their real types by reading the corresponding dictionary entry and
using the same method used for interfaces to retrieve the DIE from a
runtime._type address.
'2586e9b1'.
With generics a single function can have multiple concrete
instantiations, the old version of FindFileLocation supported at most
one concrete instantiation per function and any number of inlined
calls, this supports any number of inlined calls and concrete
functions.
When the function we are calling is an autogenerated stub (because, for
example, we are calling it through a function pointer) the declaration
line of variables is meaningless and could cause us to discard valid
return arguments.
Right now, if (*compositeMemory).WriteMemory needs to write a value to
a register that's smaller than the full size of the register (say, a
uint32 being passed as an argument), then (*AMD64Registers).SetReg can
later fail a sanity check that ensures the passed DwarfRegister is a
full size register.
Fix this by reading the old value of the register and overwriting just
the relevant parts with the new register. For the purposes of an
argument, it would probably be fine to just pad with zeroes, but merging
with the existing value is what gdb does.
Fixes#2698
While Go still mostly uses DWARF v4, newer versions of GCC will emit
DWARF v5 by default. This patch improves support for DWARF v5 by parsing
the .debug_line_str section and using that during file:line lookups.
This patch only includes support for files, not directories.
Co-authored-by: Derek Parker <deparker@redhat.com>
Adds DWARF register number and support for AVX-512 registers.
Changes proc/gdbserial so that the 'g' and 'G' commands are never used
with debugserver since they seem to corrupt the thread state when used
on AVX-512 capable hardware.
Also changes TestClientServer_FpRegisters to be simpler and more
resilient to changes to the Go runtime.
Fixes#2479
The godwarf package provides two ways to turn a dwarf.Entry into a
godwarf.Tree: LoadTree and EntryToTree. The former doesn't handle
children - it doesn't advance a Reader past them (in fact, it doesn't
even know about a Reader). EntryToTree is only used for variables and
formal param DIEs, which don't have children, and it would very likely
be incorrect to use it for DIEs with children. This patch makes the
function panic if the entry can have children.
This adds a workaround for the bug described at:
https://github.com/golang/go/issues/25841
Because dsymutil running on PIE does not adjust the address of
debug_frame entries (but adjusts debug_info entries) we try to do the
adjustment ourselves.
Updates #2346
Delve represents registerized variables (fully or partially) using
compositeMemory, implementing proc.(*compositeMemory).WriteMemory is
necessary to make SetVariable and function calls work when Go will
switch to using the register calling convention in 1.17.
This commit also makes some refactoring by moving the code that
converts between register numbers and register names out of pkg/proc
into a different package.
The DWARF standard does not say that a DW_ATTR_abstract_origin can only
reference entries that appear before it, this change fixes BinaryInfo
to comply. See #2284 for an example of this happening.
* proc: misc test fixes for Go 1.16
* proc: fix cgo stacktraces in Go 1.16 with simplified C -> Go call path
* dwarf/line: make dwarf/line correct when '\\' are used
Our code depends heavily on paths being '/' separated because go always
produced '/' separated file paths. The call to filepath.Join will
normalize the paths, on windows, to always be '\\' separated, which
violated our assumptions.
This didn't use to be a problem because the codepath that calls
filepath.Join was never exercised by executable files produced by Go,
but Go 1.16 started producing debug_line sections that use the
directory table with https://go-review.googlesource.com/c/go/+/263017/.
Fix this to always use path.Join after making sure, on windows, to
always normalize paths to use '/' as a separator. Replace the use of
filepath.IsAbs with an operating system independent version.
* goversion: bump supported Go version
This is needed to fix the problem we have with 1.15.4+ after the
backport is applied to it. The DWARF standard isn't clear on what
should happen with the end_of_sequence opcode but this is consistent
with debug/dwarf.LineReader as well as gdb.
* dwarf/line: ignore end_of_sequence entry if AllPCsBetween
Go 1.15 (but possibly prior versions of Go too) has a tendency to use
an address in the middle of an instruction for this entry, but if it
was correct it would be after the last instruction of the function
anyway.
This problem manifests especially frequently as a target crash in
TestStepConcurrentPtr on linux/arm64 (~6% of the runs).
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Co-authored-by: a <a@kra>
* proc: start variable visibility one line after their decl line
In most cases variables shouldn't be visible on their declaration line
because they won't be initialized there.
Function arguments are treated as an exception.
This fix is only applied to programs compiled with Go 1.15 or later as
previous versions of Go did not report the correct declaration line for
variables captured by closures.
Fixes#1134
* proc: silence go vet error
* Makefile: enable PIE tests on windows/Go 1.15
* core: support core files for PIEs on windows
* goversion: add Go 1.15 to supported versions
* proc: fix function call injection for Go 1.15
Go 1.15 changed the call injection protocol so that the runtime will
execute the injected call on a different (new) goroutine.
This commit changes the function call support in delve to:
1. correctly track down the call injection state after the runtime
switches to a different goroutine.
2. correctly perform the escapeCheck when stack values can come from
multiple goroutine stacks.
* proc: miscellaneous fixed for call injection under macOS with go 1.15
- create copy of SP in debugCallAXCompleteCall case because the code
used to assume that regs doesn't change
- fix automatic address calculation for function arguments when an
argument has a spurious DW_OP_piece at entry
Changes implementations of proc.Registers interface and the
op.DwarfRegisters struct so that floating point registers can be loaded
only when they are needed.
Removes the floatingPoint parameter from proc.Thread.Registers.
This accomplishes three things:
1. it simplifies the proc.Thread.Registers interface
2. it makes it impossible to accidentally create a broken set of saved
registers or of op.DwarfRegisters by accidentally calling
Registers(false)
3. it improves general performance of Delve by avoiding to load
floating point registers as much as possible
Floating point registers are loaded under two circumstances:
1. When the Slice method is called with floatingPoint == true
2. When the Copy method is called
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 4327350142 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 3852642917 ns/op
Updates #1549
When there is a single piece and it's a register value just return it.
This is important for clang compiled programs which will use DW_OP_regN
to specify the value of the frame base.
* dwarf/line: implement DW_LNE_set_discriminator
We don't use the discriminator field in any way but we need to at least
parse it to support debub_line programs that use it.
* dwarf/line: support parsing DWARF4 debug_line sections
There is an extra field maximum_operations_per_instruction that is used
for VLIW CPUs. We don't support this feature but we have to at least
parse the field to not crash.
Instead of rescanning debug_info every time we want to read a function
(either to find inlined calls or its variables) cache the tree of
dwarf.Entry that we would generate and use that.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 5164689165 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 4817425836 ns/op
Updates #1549
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
Implement debugging function for 386 on linux with reference to AMD64.
There are a few remaining problems that need to be solved in another time.
1. The stacktrace of cgo are not exactly as expected.
2. Not implement `core` for now.
3. Not implement `call` for now. Can't not find `runtime·debugCallV1` or
similar function in $GOROOT/src/runtime/asm_386.s.
Update #20
* Fixed DirIdx (index starts at one)
I am using the elf to load C++ based elf and there the index starts at one and not zero, hence the minor fix.
* Added test
* Added proper test for c-generated elf & replaced index offset by adding build dir
* Changed other IncludeDir test
* Format fix & replace print with actual test
* Format fixes @derekparker requested.
* tests: misc test fixes for go1.14
- math.go is now ambiguous due to changes to the go runtime so specify
that we mean our own math.go in _fixtures
- go list -m requires vendor-mode to be disabled so pass '-mod=' to it
in case user has GOFLAGS=-mod=vendor
- update version of go/packages, required to work with go 1.14 (and
executed go mod vendor)
- Increased goroutine migration in one development version of Go 1.14
revealed a problem with TestCheckpoints in command_test.go and
rr_test.go. The tests were always wrong because Restart(checkpoint)
doesn't change the current thread but we can't assume that when the
checkpoint was taken the current goroutine was running on the same
thread.
* goversion: update maximum supported version
* Makefile: disable testing lldb-server backend on linux with Go 1.14
There seems to be some incompatibility with lldb-server version 6.0.0
on linux and Go 1.14.
* proc/gdbserial: better handling of signals
- if multiple signals are received simultaneously propagate all of them to the
target threads instead of only one.
- debugserver will drop an interrupt request if a target thread simultaneously
receives a signal, handle this situation.
* dwarf/line: normalize backslashes for windows executables
Starting with Go 1.14 the compiler sometimes emits backslashes as well
as forward slashes in debug_line, normalize everything to / for
conformity with the behavior of previous versions.
* proc/native: partial support for Windows async preempt mechanism
See https://github.com/golang/go/issues/36494 for a description of why
full support for 1.14 under windows is problematic.
* proc/native: disable Go 1.14 async preemption on Windows
See https://github.com/golang/go/issues/36494
It was reading all the way to the end of the debug_info section,
slowing down stacktraces substantially.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 80344642562 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 22218288218 ns/op
i.e. a reduction of the cost of a breakpoint hit from 8ms to 2.2ms
Updates #1549
* proc: separate amd64-arch code
separate amd64 code about stacktrace, so we can add arm64 stacktrace code.
* proc: implemente stacktrace of arm64
* delve now can use stack, frame commands on arm64-arch debug.
Co-authored-by: tykcd996 <tang.yuke@zte.com.cn>
Co-authored-by: hengwu0 <wu.heng@zte.com.cn>
* test: remove skip-code of stacktrace on arm64
* add LR DWARF register and remove skip-code for fixed tests
* proc: fix the Continue command after the hardcoded breakpoint on arm64
Arm64 use hardware breakpoint, and it will not set PC to the next instruction like amd64. We should move PC in both runtime.breakpoints and hardcoded breakpoints(probably cgo).
* proc: implement cgo stacktrace on arm64
* proc: combine amd64_stack.go and arm64_stack.go file
* proc: reorganize the stacktrace code
* move SwitchStack function arch-related
* fix Continue command after manual stop on arm64
* add timeout flag to make.go to enable infinite timeouts
Co-authored-by: aarzilli <alessandro.arzilli@gmail.com>
Co-authored-by: hengwu0 <wu.heng@zte.com.cn>
Co-authored-by: tykcd996 <56993522+tykcd996@users.noreply.github.com>
Co-authored-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
Due to a bug in the Go compiler midstack inlined calls do not report
their ranges correctly. We can't check if an address is in the range of
a DIE by simply looking at that DIE's range, we should also recursively
check the DIE's children's ranges.
Also fixes the way stacktraces of midstack inlined calls are reported
(they used to be inverted, with the deepest inlined stack frame
reported last).
Fixes#1795
