Support for position independent executables (PIE) on the native linux
backend, the gdbserver backend on linux and the core backend.
Also implemented in the windows native backend, but it can't be tested
because go doesn't support PIE on windows yet.
Adds -defer flag to the stack command that decorates the stack traces
by associating each stack frame with its deferred calls.
Reworks proc.next to use this feature instead of using proc.DeferPC,
laying the groundwork to implement #1240.
There is no guarantee that files will end up stored contiguously in the
debug_line section which makes this optimization wrong in the general
case.
In particular with recent versions of go1.11 and a go.mod file present
the go compiler seems to sometimes produce executables that actually
violate this assumption.
Implements the function call injection protocol introduced in go 1.11
by https://go-review.googlesource.com/c/go/+/109699.
This is only the basic support, see TODO comments in pkg/proc/fncall.go
for a list of missing features.
Updates #119
This pull request makes several changes to delve to allow headless
instancess that are started with the --accept-multiclient flag to
keep running even if there is no connected client. Specifically:
1. Makes a headless instance started with --accept-multiclient quit
after one of the clients sends a Detach request (previously they
would never ever quit, which was a bug).
2. Changes proc/gdbserial and proc/native so that they mark the
Process as exited after they detach, even if they did not kill the
process during detach. This prevents bugs such as #1231 where we
attempt to manipulate a target process after we detached from it.
3. On non --accept-multiclient instances do not kill the target
process unless we started it or the client specifically requests
it (previously if the client did not Detach before closing the
connection we would kill the target process unconditionally)
4. Add a -c option to the quit command that detaches from the
headless server after restarting the target.
5. Change terminal so that, when attached to --accept-multiclient,
pressing ^C will prompt the user to either disconnect from the
server or pause the target process. Also extend the exit prompt to
ask if the user wants to keep the headless server running.
Implements #245, #952, #1159, #1231
Displays the return values of the current function when we step out of
it after executing a step, next or stepout command.
Implementation of this feature is tricky: when the function has
returned the return variables are not in scope anymore. Implementing
this feature requires evaluating variables that are out of scope, using
a stack frame that doesn't exist anymore.
We can't calculate the address of these variables when the
next/step/stepout command is initiated either, because between that
point and the time where the stepout breakpoint is actually hit the
goroutine stack could grow and be moved to a different memory address.
Add a new method "Common" to proc.Process that returns a pointer to a
struct that pkg/proc can use to store its things, independently of the
backend.
This is used here to replace the AllGCache typecasts, it will also be
used to store the return values of the stepout breakpoint and the state
for injected function calls.
Go1.11 uses the is_stmt flag of .debug_line to communicate which
assembly instructions are good places for breakpoints, we should
respect this flag.
These changes were introduced by:
* https://go-review.googlesource.com/c/go/+/102435/
Additionally when setting next breakpoints ignore all PC addresses that
belong to the same line as the one currently under at the cursor. This
matches the behavior of gdb and avoids stopping multiple times at the
heading line of a for statement with go1.11.
Change: https://go-review.googlesource.com/c/go/+/110416 adds the
prologue_end flag to the .debug_line section to communicate the end of
the stack-split prologue. We should use it instead of pattern matching
the disassembly when available.
Fixes#550
type of interfaces
'c7cde8b'.
Caching the frame in variablesByTag is problematic:
1. accounting for variables that are (partially) stored in registers is
complicated (see issue #1106)
2. for some types (strings, interfaces...) simply creating the Variable
object reads memory, which therefore happens before we can do any
caching.
Instead cache the entire frame when the EvalScope object is created.
The cached range is between the SP value of the current frame and the
CFA of the preceeding frame, if available, or the CFA of the current
frame otherwise.
Fixes#1106
Change memCache so that the preloaded memory is not read immediately
but only after the actual read to the preloaded range.
This allows us to request caching the entire stack frame every time we
create an eval scope and no unnecessary reads will be made even if the
user is just trying to evaluate a global variable.
printcontext should use SelectedGoroutine instead of trusting that the
goroutine running on current thread matches the SelectedGoroutine.
When the user switches to a parked goroutine CurrentThread and
SelectedGoroutine will diverge.
Almost all calls to printcontext are safe, they happen after a continue
command returns when SelectedGoroutine and CurrentThread always agree,
but the calls in frameCommand and listCommand are wrong.
Additionally we should stop reporting an error when the debugger is
stopped on an unknown PC address.
Go 1.10 added inlined calls to debug_info, this commit adds support
for DW_TAG_inlined_call to delve, both for stack traces (where
inlined calls will appear as normal stack frames) and to correct
the behavior of next, step and stepout.
The calls to Next and Frame of stackIterator continue to work
unchanged and only return real stack frames, after reading each line
appendInlinedCalls is called to unpacked all the inlined calls that
involve the current PC.
The fake stack frames produced by appendInlinedCalls are
distinguished from real stack frames by having the Inlined attribute
set to true. Also their Current and Call locations are treated
differently. The Call location will be changed to represent the
position inside the inlined call, while the Current location will
always reference the real stack frame. This is done because:
* next, step and stepout need to access the debug_info entry of
the real function they are stepping through
* we are already manipulating Call in different ways while Current
is just what we read from the call stack
The strategy remains mostly the same, we disassemble the function
and we set a breakpoint on each instruction corresponding to a
different file:line. The function in question will be the one
corresponding to the first real (i.e. non-inlined) stack frame.
* If the current function contains inlined calls, 'next' will not
set any breakpoints on instructions that belong to inlined calls. We
do not do this for 'step'.
* If we are inside an inlined call that makes other inlined
functions, 'next' will not set any breakpoints that belong to
inlined calls that are children of the current inlined call.
* If the current function is inlined the breakpoint on the return
address won't be set, because inlined frames don't have a return
address.
* The code we use for stepout doesn't work at all if we are inside
an inlined call, instead we call 'next' but instruct it to remove
all PCs belonging to the current inlined call.
debug_info entries can use DW_AT_abstract_origin to inherit the
attributes of another entry, supporting this attribute is necessary to
support DW_TAG_inlined_subroutine.
Go, starting with 1.10, emits DW_TAG_inlined_subroutine entries when
inlining is enabled.
When creating a stack trace we should switch between the goroutine
stack and the system stack (where cgo code is executed) as appropriate
to reconstruct the logical stacktrace.
Goroutines that are currently executing on the system stack will have
the SystemStack flag set, frames of the goroutine stack will have a
negative FrameOffset (like always) and frames of the system stack will
have a positive FrameOffset (which is actually just the CFA value for
the frame).
Updates #935
StepBreakpoints are set on CALL instructions, when they are hit we
disassemble the current instruction, figure out the destination address
and set a breakpoint after the prologue of the called function.
In order to disassemble the current instruction we disassemble the area
of memory starting from PC and going to PC+15 (because 15 bytes is the
maximum length of one instruction on AMD64). This means that we won't
just disassemble one instruction but also a few instructions following
it ending with one truncated instruction.
This usually works fine but sometimes the disassembler will panic with
an array out of bounds error when trying to disassemble a truncated
instruction. To avoid this problem this commit changes the funciton
disassemble to take one extra parameter, singleInstr, when singleInstr
is set disassemble will quit after disassembling a single instruction.
Conditional breakpoints with unmet conditions would cause next and step
to skip the line.
This breakpoint changes the Kind field of proc.Breakpoint from a single
value to a bit field, each breakpoint object can represent
simultaneously a user breakpoint and one internal breakpoint (of which
we have several different kinds).
The breakpoint condition for internal breakpoints is stored in the new
internalCond field of proc.Breakpoint so that it will not conflict with
user specified conditions.
The breakpoint setting code is changed to allow overlapping one
internal breakpoint on a user breakpoint, or a user breakpoint on an
existing internal breakpoint. All other combinations are rejected. The
breakpoint clearing code is changed to clear the UserBreakpoint bit and
only remove the phisical breakpoint if no other bits are set in the
Kind field. ClearInternalBreakpoints does the same thing but clearing
all bits that aren't the UserBreakpoint bit.
Fixes#844
Move some duplicate code, related to breakpoints, that was in both
backends into a single place.
This is in preparation to solve issue #844 (conditional breakpoints
make step and next fail) which will make this common breakpoint code
more complicated.
Instead of only tracking a few cherrypicked registers in stack.go track
all DWARF registers.
This is needed for cgo code and for the locationlists emitted by go in
1.10:
* The debug_frame sections emitted by C compilers can not be used
without tracking all registers
* the loclists emitted by go1.10 need all registers of a frame to be
interpreted.
1. Use a slice instead of a map to access standard and extended opcodes
(reduces BenchmarkStateMachine from ~12ms/op to ~7ms/op)
2. Cache StateMachine values for the entry point of functions.
gosymtab and gopclntab only contain informations about go code, linked
C code isn't there, we should use debug_line instead to also cover C.
Updates #935
On macOS we can also stop when we receive a signal,
propagate this reason upwards to the client.
Also clear internal breakpoints after an unrecovered-panic since they
can not be reached anymore.
Fixes#872
Splits out type parsing and go-specific Type hierarchy from
x/debug/dwarf, replace x/debug/dwarf with debug/dwarf everywhere,
remove x/debug/dwarf from vendoring.
Instead of panicing for sending on a closed channel, detect that the
process has exited and return a proper error message.
This patch also cleans up some spots where the Pid is omitted from the
error.
Fixes#920
* proc: fix interaction of RequestManualStop and conditional breakpoints
A conditional breakpoint that is hit but has the condition evaluate to
false can block a RequestManualStop from working. If the conditional
breakpoint is set on an instruction that is executed very frequently by
multiple goroutines (or many conditional breakpoints are set) it could
prevent all calls to RequestManualStop from working.
This commit fixes the problem by changing proc.Continue to exit
unconditionally after a RequestManualStop is called.
* proc/gdbserial: fix ContinueOnce getting stuck on macOS
Fixes#902
* Fix various issues detected by megacheck
I've ran honnef.co/go/tools/cmd/megacheck and fixed a few of the
things that came up there.
* Cleanup using Gogland
When a Go program is externally linked, the external linker is
responsible for picking the TLS offset. It records its decision in the
runtime.tlsg symbol. Read the offset from that rather than guessing -16.
This implementation causes a regression: 1.4 and earlier will no longer
work.
Before this commit our temp breakpoints only checked that we would stay
on the same goroutine.
However this isn't enough for recursive functions we must check that we
stay on the same goroutine AND on the same stack frame (or, in the case
of the StepOut breakpoint, the previous stack frame).
This commit:
1. adds a new synthetic variable runtime.frameoff that returns the
offset of the current frame from the base of the call stack.
This is similar to runtime.curg
2. Changes the condition used for breakpoints on the lines of the
current function to check that runtime.frameoff hasn't changed.
3. Changes the condition used for breakpoints on the return address to
check that runtime.frameoff corresponds to the previous frame in the
stack.
4. All other temporary breakpoints (the step-into breakpoints and defer
breakpoints) remain unchanged.
Fixes#828
- moved target.Interface into proc as proc.Process
- rename proc.IThread to proc.Thread
- replaced interfaces DisassembleInfo, Continuable and
EvalScopeConvertible with Process.
- removed superfluous Gdbserver prefix from types in the gdbserial
backend.
- removed superfluous Core prefix from types in the core backend.
* proc: Refactor stackIterator to use memoryReadWriter and BinaryInfo
* proc: refactor EvalScope to use memoryReadWriter and BinaryInfo
* proc: refactor Disassemble to use memoryReadWriter and BinaryInfo
* proc: refactor BinaryInfo part of proc.Process to own type
The data structures and associated code used by proc.Process
to implement target.BinaryInfo will also be useful to support a
backend for examining core dumps, split this part of proc.Process
to a different type.
* proc: compile support for all executable formats unconditionally
So far we only compiled in support for loading the executable format
supported by the host operating system.
Once support for core files is introduced it is however useful to
support loading in all executable formats, there is no reason why it
shouldn't be possible to examine a linux coredump on windows, or
viceversa.
* proc: bugfix: do not resume threads on detach if killing
* Replace BinaryInfo interface with BinInfo() method returning proc.BinaryInfo
Detach did not work for processes we attach to via PID.
Linux: we were only detaching from the main thread, all threads are
detached independently
Windows: we must resume all threads before detaching.
macOS: still broken.
Updates #772
