* service/debugger: disable breakpoints with hitcond not satisfiable
To avoid slowing down the debugged process unnecessarily, we disable
breakpoints with a hit condition that can no longer be hit again.
* test: add integration tests for hit conditions no more satisfiable
* proc/test: fix typo in breakpoints related tests
* test: use the new API for hitcond integration tests
* go.mod: update golang.org/x/tools to v0.1.8
Fixes TestGeneratedDoc on go1.18
* TeamCity: bump test matrix
Add 1.18 to test matrix. Remove 1.15 from test matrix and from support range.
* proc,tests: update for regabi on arm64 and 386
Make sure that stacktrace registers always contain the PC register of
the current frame, even though the debug_frame rules might not specify
it on architectures that use a link register.
The PC register is needed to look up loclist entries for variable
evaluation.
* goversion: bump maximum supported Go version to 1.18
* proc: disable asyncpreempt on linux/arm64
Asyncpreempt on linux/arm64 can sometimes restart a sequence of
instructions which will make breakpoint appear to be hit twice in some
cases.
Fix signal handling during thread single stepping so that signals that
are generated by executing the current instruction are immediately
propagated to the inferior, while signals other signals sent to the
thread are delayed until the full resume happens.
Fixes a bug where a breakpoint set on an instruction that causes a
SIGSEGV would make Delve hang and a bug where signals received during
single step would make it look like an instruction is executed twice.
Fixes#2801Fixes#2792
* made Pid a method of Target instead of a method of Process
* changed argument of NewTarget to ProcessInternal, since that's the
interface that backends have to implement
* removed warnings about ProcessInternal since there is no way for
users of pkg/proc to access those methods anyway
* made RecordingManipulation an optional interface for backends, Target
supplies its own dummy implementation when the backend doesn't
* inlined small interfaces that only existed to be inlined in
proc.Process anyway
* removed unused function findExecutable in the Windows and no-native
darwin backends
* removed (*EvalScope).EvalVariable, an old synonym for EvalExpression
Debugserver has a bug where writing to a AVX-2 or AVX-512 register does
not work unless it is followed by at least a write to a AVX (not 2 or
512) register.
See also: https://bugs.llvm.org/show_bug.cgi?id=52362Fixes#2767
There are persistent issues with watchpoints on Windows, it is not
clear whether it's a problem with the VM running the tests or if there
is a real bug in our implementation of hardware breakpoints on Windows.
Until the cause can be determined watchpoints on Windows will be
disabled.
Updates #2768
* service/dap: remove deadlock in TestLaunchDebugRequest
Fixes#2746
* terminal: fix TestScopePrefix flakiness
When there are more than 10 frames api.PrintStack will prefix the
output with spaces to right justify the frame number, which confuses
TestScopePrefix.
* _scripts: pass -buildvcs for Go 1.18 and later on TeamCity
Go 1.18 will try to stamp builds with the VCS version, this doesn't
work on TeamCity because the checkout isn't a valid repository (but
looks like it).
Pass -buildvcs=false to disable this feature.
* proc: switch to goroutine stack if first frame's func can not be found
If the first frame on the system stack can not be resolved to a
function switch directly to the goroutine stack.
* proc/native: always stop after RequestManualStop on Windows
On Windows RequestManualStop will generate an exception on a special
DbgUiRemoteBreakin thread, sometimes this thread will die before we
finish stopping the process. We need to account for that and still stop
even if the thread is gone and no other thread hit a breakpoint.
Fixes flakiness of TestIssue419.
* proc/native: fix watchpoints with new threads on Windows
When a new thread is created we must reapply all watchpoints to it,
like we do on linux.
* tests: be lenient on goroutinestackprog tests on Windows
We can not guarantee that we find all goroutines stopped in a good
place and sometimes the stacktrace fails on Windows.
Adds watchpoint support to gdbserver backend for rr debugger and
debugserver on macOS/amd64 and macOS/arm64.
Also changes stack watchpoints to support reverse execution.
With generics a single function can have multiple concrete
instantiations, the old version of FindFileLocation supported at most
one concrete instantiation per function and any number of inlined
calls, this supports any number of inlined calls and concrete
functions.
When the function we are calling is an autogenerated stub (because, for
example, we are calling it through a function pointer) the declaration
line of variables is meaningless and could cause us to discard valid
return arguments.
Go 1.18 removed the jmpdefer call from deferreturn, now deferreturn is
a normal function call that can appear on the stack, rules for
detecting a deferreturn call must be changed and new code must be added
to skip it while stepping out.
Internal breakpoints do not need IDs and assigning them from a counter
separate from the user ID counter can be a cause of confusion.
If a user breakpoint is overlayed on top of a pre-existing internal
breakpoint the temporary ID will be surfaced as if it was a user ID,
possibly conflicting with another user ID.
If a temporary breakpoint is overlayed on top of a pre-existing user
breakpoint and the user breakpoint is first deleted and then
re-created, the user ID will be resurrected along with the breakpoint,
instead of allocating a fresh one.
This change removes internal breakpoint IDs entirely, only user
breakpoints receive an ID.
In order for DAP to support halting the program (either manually or on a breakpoint) performing some action and then resuming execution, there needs to be a way to stop the program without clearing the internal breakpoints. This is necessary for log points and stopping the program to set breakpoints.
The debugging UI makes it seem like a user should be able to set or clear a breakpoint at any time. Adding this ability to complete synchronous requests while the program is running is thus important to create a seamless user experience.
This change just adds a configuration to determine whether the target should clear the stepping breakpoints, and changes the server to use this new mode. Using the new mode means that the DAP server must determine when it expect the next to be canceled and do this manually.
* terminal,service: add way to see internal breakpoints
Now that Delve has internal breakpoints that survive for long periods
of time it will be useful to have an option to display them.
* proc,terminal,service: support stack watchpoints
Adds support for watchpoints on stack allocated variables.
When a stack variable is watched, in addition to the normal watchpoint
some support breakpoints are created:
- one breakpoint inside runtime.copystack, used to adjust the address
of the watchpoint when the stack is resized
- one or more breakpoints used to detect when the stack variable goes
out of scope, those are similar to the breakpoints set by StepOut.
Implements #279
* proc: move breakpoint condition evaluation out of backends
Moves breakpoint condition evaluation from the point where breakpoints
are set, inside ContinueOnce, to (*Target).Continue.
This accomplishes three things:
1. the breakpoint evaluation method needs not be exported anymore
2. breakpoint condition evaluation can be done with a full scope,
containing a Target object, something that wasn't possible before
because ContinueOnce doesn't have access to the Target object.
3. moves breakpoint condition evaluation out of the critical section
where some of the threads of the target process might be still
running.
* proc/native: handle process death during stop() on Windows
It is possible that the thread dies while we are inside the stop()
function. This results in an Access is denied error being returned by
SuspendThread being called on threads that no longer exist.
Delay the reporting the error from SuspendThread until the end of
stop() and only report it if the thread still exists at that point.
Fixes flakyness with TestIssue1101 that was exacerbated by moving
breakpoint condition evaluation outside of the backends.
* pkg/proc: Prefer throw instead of fatalthrow
Currently there is a breakpoint set at runtime.fatalthrow to catch any
situation where the runtime crashes (e.g. deadlock).
When we do this, we go up a frame in order to parse the crash reason.
The problem is that there is no guarentee the "s" variable we attempt to
parse will still be considered "live".
Since runtime.fatalthrow is never called directly, set a breakpoint on
runtime.throw instead and prevent having
to search up a stack frame in order to
get the throw reason.
Fixes#2602
* service/dap: Fix TestFatalThrowBreakpoint
* Reenable TestFatalThrow DAP test
* service/dap: Don't skip test on < 1.17
* service/dap: Update test constraint for 1.16
* pkg/proc: Reinstate runtime.fatalthrow as switchstack exception
Changes Breakpoint to allow multiple overlapping internal breakpoints
on the same instruction address.
This is done by changing the Breakpoint structure to contain a list of
"breaklets", each breaklet has a BreakpointKind and a condition
expression, independent of the other.
A breakpoint is considered active if any of its breaklets are active.
A breakpoint is removed when all its breaklets are removed.
We also change the terminology "internal breakpoint" to "stepping
breakpoint":
HasInternalBreakpoints -> HasSteppingBreakpoints
IsInternal -> IsStepping
etc...
The motivation for this change is implementing watchpoints on stack
variables.
Watching a stack variable requires also setting a special breakpoint to
find out when the variable goes out of scope. These breakpoints can not
be UserBreakpoints because only one user breakpoint is allowed on the
same instruction and they can not be internal breakpoints because they
should not be cleared when a next operation is completed (they should
be cleared when the variable watch is cleared).
Updates #279
* proc: support new Go 1.17 panic/defer mechanism
Go 1.17 will create wrappers for deferred calls that take arguments.
Change defer reading code so that wrappers are automatically unwrapped.
Also the deferred function is called directly by runtime.gopanic, without going through runtime.callN which means that sometimes when a panic happens the stack is either:
0. deferred function call
1. deferred call wrapper
2. runtime.gopanic
or:
0. deferred function call
1. runtime.gopanic
instead of always being:
0. deferred function call
1. runtime.callN
2. runtime.gopanic
the isPanicCall check is changed accordingly.
* test: miscellaneous minor test fixes for Go 1.17
* proc: resolve inlined calls when stepping out of runtime.breakpoint
Calls to runtime.Breakpoint are inlined in Go 1.17 when inlining is
enabled, resolve inlined calls in stepInstructionOut.
* proc: add support for debugCallV2 with regabi
This change adds support for the new debug call protocol which had to
change for the new register ABI introduced in Go 1.17.
Summary of changes:
- Abstracts over the debug call version depending on the Go version
found in the binary.
- Uses R12 instead of RAX as the debug protocol register when the binary
is from Go 1.17 or later.
- Creates a variable directly from the DWARF entry for function
arguments to support passing arguments however the ABI expects.
- Computes a very conservative stack frame size for the call when
injecting a call into a Go process whose version is >=1.17.
Co-authored-by: Michael Anthony Knyszek <mknyszek@google.com>
Co-authored-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
* TeamCity: enable tests on go-tip
* goversion: version compatibility bump
* TeamCity: fix go-tip builds on macOS/arm64
Co-authored-by: Michael Anthony Knyszek <mknyszek@google.com>
ConvertEvalScope() attempts to find the scope for the specified
goroutine id and frame index. If the goroutine that is found is nil,
then it falls back to the threads stack trace to find the scope.
This fix makes sure that the frame id is taken into account for
thread strack traces as well.
We told clients that further loading of variables can be done by
specifying a type cast using the address of a variable that we
returned.
This does not work for registerized variables (or, in general,
variables that have a complex location expression) because we don't
give them unique addresses and we throw away the compositeMemory object
we made to read them.
This commit changes proc so that:
1. variables with location expression divided in pieces do get a unique
memory address
2. the compositeMemory object is saved somewhere
3. when an integer is cast back into a pointer type we look through our
saved compositeMemory objects to see if there is one that covers the
specified address and use it.
The unique memory addresses we generate have the MSB set to 1, as
specified by the Intel 86x64 manual addresses in this form are reserved
for kernel memory (which we can not read anyway) so we are guaranteed
to never generate a fake memory address that overlaps a real memory
address of the application.
The unfortunate side effect of this is that it will break clients that
do not deserialize the address to a 64bit integer. This practice is
contrary to how we defined our types and contrary to the specification
of the JSON format, as of json.org, however it is also fairly common,
due to javascript itself having only 53bit integers.
We could come up with a new mechanism but then even more old clients
would have to be changed.
While Go still mostly uses DWARF v4, newer versions of GCC will emit
DWARF v5 by default. This patch improves support for DWARF v5 by parsing
the .debug_line_str section and using that during file:line lookups.
This patch only includes support for files, not directories.
Co-authored-by: Derek Parker <deparker@redhat.com>
* pkg/proc: implement support for hit count breakpoints
* update comment
* udpate hitcount comment
* update HitCond description
* add test for hit condition error
* respond to review
* service/dap: add support for hit count breakpoints
* use amendbps to preserve hit counts
* update test health doc
* fix failing test
* simplify hit conditions
* REmove RequestString, use name instead
* update backend_test_health.md
* document hit count cond
* fix tests
A RequestManualStop received while the target program is stopped can
induce a crash when the target is restarted.
This is caused by the phantom breakpoint detection that was introduced
in PR #2179 / commit e69d536.
Instead of always interpreting an unexplained SIGTRAP as a phantom
breakpoint memorize all possible unreported breakpoint hits and only
act on it when the thread hasn't moved from one.
Also clarifies the behavior of the halt command when it is received
while the target is stopped or in the process of stopping.
Adds the low-level support for watchpoints (aka data breakpoints) to
the native linux/amd64 backend.
Does not add user interface or functioning support for watchpoints
on stack variables.
Updates #279
There seems to be a problem where debugserver will leave a zombie
process instead of detaching correctly, we are sending the right
commands, it doesn't seem to be a problem with Delve.
This adds a workaround for the bug described at:
https://github.com/golang/go/issues/25841
Because dsymutil running on PIE does not adjust the address of
debug_frame entries (but adjusts debug_info entries) we try to do the
adjustment ourselves.
Updates #2346
- remove github workflow for testing macOS/amd64 that is now covered by
TeamCity
- fix DeepSource glob patterns to actually match what they are intended
to match (did the interpretation change?)
- disable some cgo tests on darwin/arm64
Delve represents registerized variables (fully or partially) using
compositeMemory, implementing proc.(*compositeMemory).WriteMemory is
necessary to make SetVariable and function calls work when Go will
switch to using the register calling convention in 1.17.
This commit also makes some refactoring by moving the code that
converts between register numbers and register names out of pkg/proc
into a different package.
* TeamCity: add linux/arm64/tip configuration
So that it can be tested when we make the next-version-support-branch.
* tests: disable failing cgo tests on arm64
* proc/core: off-by-one error reading ELF core files
core.(*splicedMemory).ReadMemory checked the entry interval
erroneously when dealing with contiguous entries.
* terminal,service,proc/*: adds dump command (gcore equivalent)
Adds the `dump` command that creates a core file from the target process.
Backends will need to implement a new, optional, method `MemoryMap` that
returns a list of mapped memory regions.
Additionally the method `DumpProcessNotes` can be implemented to write out
to the core file notes describing the target process and its threads. If
DumpProcessNotes is not implemented `proc.Dump` will write a description of
the process and its threads in a OS/arch-independent format (that only Delve
understands).
Currently only linux/amd64 implements `DumpProcessNotes`.
Core files are only written in ELF, there is no minidump or macho-o writers.
# Conflicts:
# pkg/proc/proc_test.go
Add a helper method for collecting line table file references that
does the correct thing for DWARF 5 vs DWARF 4 (in the latter case you
have an implicit 0 entry which is the comp dir, whereas in the former
case you do not). This is to avoid out-of-bounds errors when examining
the file table section of a DWARF 5 compilation unit's line table.
Included is a new linux/amd-only test that includes a precompiled C
object file with a DWARF-5 section that triggers the bug in question.
Fixes#2319
Changs TestClientServer_FullStacktrace and
Test1ClientServer_FullStacktrace to log more information, also removes
code from TestFrameEvaluation that could mask the error.
Updates #2231
Fix bug in DAP test: TestEvaluateCallRequest.
In Go 1.15 the call injection will be executed on a different goroutine
from the goroutine where it was started on to avoid confusing the
garbage collector, the test must be aware of this fact and use the
goroutine ID from the stopped response instead of assuming 1 is the
currently selected goroutine.
Disables TestAttachDetach when running in Github Actions.
Disable some coredump tests when running in Github Actions (core size
limits?).
On linux we can not read memory if the thread we use to do it is
occupied doing certain system calls. The exact conditions when this
happens have never been clear.
This problem was worked around by using the Blocked method which
recognized the most common circumstances where this would happen.
However this is a hack: Blocked returning true doesn't mean that the
problem will manifest and Blocked returning false doesn't necessarily
mean the problem will not manifest. A side effect of this is issue
#2151 where sometimes we can't read the memory of a thread and find its
associated goroutine.
This commit fixes this problem by always reading memory using a thread
we know to be good for this, specifically the one returned by
ContinueOnce. In particular the changes are as follows:
1. Remove (ProcessInternal).CurrentThread and
(ProcessInternal).SetCurrentThread, the "current thread" becomes a
field of Target, CurrentThread becomes a (*Target) method and
(*Target).SwitchThread basically just sets a field Target.
2. The backends keep track of their own internal idea of what the
current thread is, to use it to read memory, this is the thread they
return from ContinueOnce as trapthread
3. The current thread in the backend and the current thread in Target
only ever get synchronized in two places: when the backend creates a
Target object the currentThread field of Target is initialized with the
backend's current thread and when (*Target).Restart gets called (when a
recording is rewound the currentThread used by Target might not exist
anymore).
4. We remove the MemoryReadWriter interface embedded in Thread and
instead add a Memory method to Process that returns a MemoryReadWriter.
The backends will return something here that will read memory using
the current thread saved by the backend.
5. The Thread.Blocked method is removed
One possible problem with this change is processes that have threads
with different memory maps. As far as I can determine this could happen
on old versions of linux but this option was removed in linux 2.5.
Fixes#2151
Due to a missing check TestCgoStacktrace2 didn't actually check
anything. Enable it and then skip it on linux/386 and linux/arm64 where
it's broken.
Co-authored-by: a <a@kra>
* proc/tests: keep track of tests skipped due to backend problems
Mark tests skipped due to backend problems and add a script to keep
track of them.
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Since proc is supposed to work independently from the target
architecture it shouldn't use architecture-dependent types, like
uintptr. For example when reading a 64bit core file on a 32bit
architecture, uintptr will be 32bit but the addresses proc needs to
represent will be 64bit.
Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
An internal breakpoint condition shouldn't ever error:
* use a ThreadContext to evaluate conditions if a goroutine isn't
available
* evaluate runtime.curg to a fake g variable containing only
`goid == 0` when there is no current goroutine
Fixes#2113
Commit 1ee8d5c reviewed in Pull Request #1960 relaxed some tests using
goroutinestackprog but missed others.
Fixes some test flakiness that isn't relevant.
* proc: start variable visibility one line after their decl line
In most cases variables shouldn't be visible on their declaration line
because they won't be initialized there.
Function arguments are treated as an exception.
This fix is only applied to programs compiled with Go 1.15 or later as
previous versions of Go did not report the correct declaration line for
variables captured by closures.
Fixes#1134
* proc: silence go vet error
* Makefile: enable PIE tests on windows/Go 1.15
* core: support core files for PIEs on windows
* goversion: add Go 1.15 to supported versions
* proc: fix function call injection for Go 1.15
Go 1.15 changed the call injection protocol so that the runtime will
execute the injected call on a different (new) goroutine.
This commit changes the function call support in delve to:
1. correctly track down the call injection state after the runtime
switches to a different goroutine.
2. correctly perform the escapeCheck when stack values can come from
multiple goroutine stacks.
* proc: miscellaneous fixed for call injection under macOS with go 1.15
- create copy of SP in debugCallAXCompleteCall case because the code
used to assume that regs doesn't change
- fix automatic address calculation for function arguments when an
argument has a spurious DW_OP_piece at entry
The file:line information for the entrypoint is more acccurate than the
file:line information at a return point, which could be affected by a
compiler bug.
Fixes#2086
Recent change #2061:
292f5c69f0c769fd32c2e8b1e7153b56e908efd7
proc: step into unexported runtime funcs when already inside runtime
means that TestIssue414 (which tries to step repeatedly until the
program exits) can now steps through way more runtime code than it ever
did before. This causes this test to occasionally fail. Stepping
blindly through runtime code has never been particularly safe as the
runtime can switch to a different goroutine causing Delve to misbehave.
This change restores the previous behavior of TestIssue414 where Step
behaved like Next inside runtime code.
On platforms other than macOS this doesn't matter but on macOS a
segmentation fault will cause ContinueOnce to return an error, before
returning it we should still fix the current thread and selected
goroutine values.
Fixes#2078
Changes implementations of proc.Registers interface and the
op.DwarfRegisters struct so that floating point registers can be loaded
only when they are needed.
Removes the floatingPoint parameter from proc.Thread.Registers.
This accomplishes three things:
1. it simplifies the proc.Thread.Registers interface
2. it makes it impossible to accidentally create a broken set of saved
registers or of op.DwarfRegisters by accidentally calling
Registers(false)
3. it improves general performance of Delve by avoiding to load
floating point registers as much as possible
Floating point registers are loaded under two circumstances:
1. When the Slice method is called with floatingPoint == true
2. When the Copy method is called
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 4327350142 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 3852642917 ns/op
Updates #1549
This flag allows users on UNIX systems to set the tty for the program
being debugged by Delve. This is useful for debugging command line
applications which need access to their own TTY, and also for
controlling the output of the debugged programs so that IDEs may open a
dedicated terminal to show the output for the process.
The test was always flaky because we can't fully control the state of
all goroutines in the target program, Go 1.14's asynchronous preemption
exacerbates the problem.
See for example:
https://travis-ci.com/github/go-delve/delve/jobs/302407282
This commit relaxes the checks made by the test to avoid irrelevante
flakiness.
Under some circumstances (methods with non-pointer receivers or from
embedded fields called through an interface) the compiler will
autogenerate wrapper functions.
This commit changes next, step and stepout to skip all autogenerated
wrappers.
Fixes#1908
Reset the timer once we start executing the code paths we actually care
to measure, since the setup and continue steps can be relatively
expensive.
Also, disable recording on benchmarks. This seems less useful, and also
cuts out a lot of noise when benchmarks are run.
Inserts a call to ClearAllGCache into stepInstructionOut so that cached
goroutine state is not inconsistent after an injected function call.\
Fixes#1925
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
* proc: move defer breakpoint code into a function
Moves the code that sets a breakpoint on the first deferred function,
used by both next and StepOut, to its function.
* proc: implement reverse step/next/stepout
When the direction of execution is reversed (on a recording) Step, Next and
StepOut will behave similarly to their forward version. However there are
some subtle interactions between their behavior, prologue skipping, deferred
calls and normal calls. Specifically:
- when stepping backwards we need to set a breakpoint on the first
instruction after each CALL instruction, once this breakpoint is reached we
need to execute a single StepInstruction operation to reverse step into the
CALL.
- to insure that the prologue is skipped reverse next needs to check if it
is on the first instruction after the prologue, and if it is behave like
reverse stepout.
- there is no reason to set breakpoints on deferred calls when reverse
nexting or reverse stepping out, they will never be hit.
- reverse step out should generally place its breakpoint on the CALL
instruction that created the current stack frame (which will be the CALL
instruction immediately preceding the instruction at the return address).
- reverse step out needs to treat panic calls and deferreturn calls
specially.
* service,terminal: implement reverse step, next, stepout
Implement debugging function for 386 on linux with reference to AMD64.
There are a few remaining problems that need to be solved in another time.
1. The stacktrace of cgo are not exactly as expected.
2. Not implement `core` for now.
3. Not implement `call` for now. Can't not find `runtime·debugCallV1` or
similar function in $GOROOT/src/runtime/asm_386.s.
Update #20
* tests: misc test fixes for go1.14
- math.go is now ambiguous due to changes to the go runtime so specify
that we mean our own math.go in _fixtures
- go list -m requires vendor-mode to be disabled so pass '-mod=' to it
in case user has GOFLAGS=-mod=vendor
- update version of go/packages, required to work with go 1.14 (and
executed go mod vendor)
- Increased goroutine migration in one development version of Go 1.14
revealed a problem with TestCheckpoints in command_test.go and
rr_test.go. The tests were always wrong because Restart(checkpoint)
doesn't change the current thread but we can't assume that when the
checkpoint was taken the current goroutine was running on the same
thread.
* goversion: update maximum supported version
* Makefile: disable testing lldb-server backend on linux with Go 1.14
There seems to be some incompatibility with lldb-server version 6.0.0
on linux and Go 1.14.
* proc/gdbserial: better handling of signals
- if multiple signals are received simultaneously propagate all of them to the
target threads instead of only one.
- debugserver will drop an interrupt request if a target thread simultaneously
receives a signal, handle this situation.
* dwarf/line: normalize backslashes for windows executables
Starting with Go 1.14 the compiler sometimes emits backslashes as well
as forward slashes in debug_line, normalize everything to / for
conformity with the behavior of previous versions.
* proc/native: partial support for Windows async preempt mechanism
See https://github.com/golang/go/issues/36494 for a description of why
full support for 1.14 under windows is problematic.
* proc/native: disable Go 1.14 async preemption on Windows
See https://github.com/golang/go/issues/36494
* pkg/proc: Introduce Target
* pkg/proc: Remove Common.fncallEnabled
Realistically we only block it on recorded backends.
* pkg/proc: Move fncallForG to Target
* pkg/proc: Remove CommonProcess
Remove final bit of functionality stored in CommonProcess and move it to
*Target.
* pkg/proc: Add SupportsFunctionCall to Target
* proc: separate amd64-arch code
separate amd64 code about stacktrace, so we can add arm64 stacktrace code.
* proc: implemente stacktrace of arm64
* delve now can use stack, frame commands on arm64-arch debug.
Co-authored-by: tykcd996 <tang.yuke@zte.com.cn>
Co-authored-by: hengwu0 <wu.heng@zte.com.cn>
* test: remove skip-code of stacktrace on arm64
* add LR DWARF register and remove skip-code for fixed tests
* proc: fix the Continue command after the hardcoded breakpoint on arm64
Arm64 use hardware breakpoint, and it will not set PC to the next instruction like amd64. We should move PC in both runtime.breakpoints and hardcoded breakpoints(probably cgo).
* proc: implement cgo stacktrace on arm64
* proc: combine amd64_stack.go and arm64_stack.go file
* proc: reorganize the stacktrace code
* move SwitchStack function arch-related
* fix Continue command after manual stop on arm64
* add timeout flag to make.go to enable infinite timeouts
Co-authored-by: aarzilli <alessandro.arzilli@gmail.com>
Co-authored-by: hengwu0 <wu.heng@zte.com.cn>
Co-authored-by: tykcd996 <56993522+tykcd996@users.noreply.github.com>
Co-authored-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
Due to a bug in the Go compiler midstack inlined calls do not report
their ranges correctly. We can't check if an address is in the range of
a DIE by simply looking at that DIE's range, we should also recursively
check the DIE's children's ranges.
Also fixes the way stacktraces of midstack inlined calls are reported
(they used to be inverted, with the deepest inlined stack frame
reported last).
Fixes#1795
Adds an API call that returns a list of packages contained in the
program and the files that were used to build them, and also a best
guess at which filesystem directory contained the package when it was
built.
This can be used by IDEs to map file paths if the debugging environment
doesn't match the build environment exactly.
Remove build tags from disassembler code, move architecture specific
functionality inside proc.Arch.
This is necessary because Delve should be able to debug corefiles
cross-platform.
* fix TestKill test:
It will fail in Open /proc/pid/ sporadicly since there is no any sync between signal sended(tracee handled) and open /proc/%d/, especially in some weak arm64 cpu. Skip /proc check on arm64.
* remove skip-code of Detach tests.
* proc/linux: do not route signals to threads while stopping
While we are trying to stop the process we should not route signals
sent to threads because that will result in threads being resumed.
Also keep better track of which threads are stopped.
This fixes an incompatibility with Go 1.14, which sends a lot of
signals to its threads to implement non-cooperative preemption,
resulting in Delve hanging waiting for an already-stopped thread to
stop.
In principle however this bug has nothing to do with Go 1.14 and could
manifest in any instance of high signal pressure.
* Makefile: discard stderr of "go list"
In module mode "go" will print messages about downloading modules to
stderr, we shouldn't confuse them for the real command output.
Modifies FindFileLocation, FindFunctionLocation and LineToPC as well as
service/debugger to support inlining and introduces the concept of
logical breakpoints.
For inlined functions FindFileLocation, FindFunctionLocation and
LineToPC will now return one PC address for each inlining and one PC
for the concrete implementation of the function (if present).
A proc.Breakpoint will continue to represent a physical breakpoint, at
a single memory location.
Breakpoints returned by service/debugger, however, will represent
logical breakpoints and may be associated with multiple memory
locations and, therefore, multiple proc.Breakpoints.
The necessary logic is introduced in service/debugger so that a change
to a logical breakpoint will be mirrored to all its physical
breakpoints and physical breakpoints are aggregated into a single
logical breakpoint when returned.
program
When evaluating type casts always resolve array types.
Instead of resolving them by looking up the string in debug_info
construct a fake array type so that a type cast to an array type always
works as long as the element type exists.
We already did this for byte arrays, this commit extends this to any
array type. The reason is that we return a fake array type (that
doesn't exist in the target program) for the array of a channel type.
Fixes#1736
Fixes a case of breakpoint confusion on resume caused by having two
breakpoints one byte apart. This bug can cause the target program to
resume execution a single byte inside an instruction and crash either
with SIGILL or a SIGSEGV, or misbehave (depending on how the truncated
instruction is decoded).
native.(*Thread).StepInstruction should call FindBreakpoint using
adjustPC==false because at that point the PC of the thread should
already have been adjusted (and it has been).
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
Add options to start a stacktrace from the values saved in the
runtime.g struct as well as a way to disable the stackSwitch logic and
just get a normal stacktrace.
proc.Next and proc.Step will call, after setting their temp
breakpoints, curthread.SetCurrentBreakpoint. This is intended to find
if one of the newly created breakpoints happens to be at the same
instruction that curthread is stopped at.
However SetCurrentBreakpoint is intended to be called after a Continue
and StepInstruction operation so it will also detect if curthread is
stopped one byte after a breakpoint.
If the instruction immediately preceeding the current instruction of
curthread happens to:
1. have one of the newly created temp breakpoints
2. be one byte long
SetCurrentBreakpoint will believe that we just hit that breakpoint and
therefore the instruction should be repeated, and thus rewind the PC of
curthread by 1.
We should distinguish between the two uses of SetCurrentBreakpoint and
disable the check for "just hit" breakpoints when inappropriate.
Fixes#1656
* proc: fix stacktraces when a SIGSEGV happens during a cgo call
When a SIGSEGV happens in a cgo call (for example as a result of
dereferencing a NULL pointer) the stack layout will look like this:
(system stack) runtime.fatalthrow
(system stack) runtime.throw
(system stack) runtime.sigpanic
(system stack) offending C function
... other C functions...
(system stack) runtime.asmcgocall
(goroutine stack) call inside cgo
The code in switchStack would switch directly from the
runtime.fatalthrow frame to the first frame in the goroutine stack,
hiding important information.
Disable this switch for runtime.fatalthrow and reintroduce the check
for runtime.mstart that existed before this version of the code was
implemented in commit 7bec20.
This problem was reported in comment:
https://github.com/go-delve/delve/issues/935#issuecomment-512182533
* cmd/dlv: actually disable C compiler optimizations when building
* *: Add .cirrus.yml for FreeBSD testing
* *: run go mod tidy
* service/test: prefer 127.0.0.1 over localhost
* dwarf/line: fix TestDebugLinePrologueParser
* vendor: rerun go mod vendor
Increases the maximum string length from 64 to 1MB when loading strings
for a binary operator, also delays the loading until it's necessary.
This ensures that comparison between strings will always succeed in
reasonable situations.
Fixes#1615
Backports debug/dwarf commit: 535741a69a1300d1fe2800778b99c8a1b75d7fdd
CL: https://go-review.googlesource.com/18459
The x/debug/dwarf that we used for dwarf/godwarf/type.go was forked
from debug/dwarf long before this commit.
Original description:
Currently readType simultaneously constructs a type graph and resolves
the sizes of the types. However, these two operations are
fundamentally at odds: the order we parse a cyclic structure in may be
different than the order we need to resolve type sizes in. As a
result, it's possible that when readType attempts to resolve the size
of a typedef, it may dereference a nil Type field of another typedef
retrieved from the type cache that's only partially constructed.
To fix this, we delay resolving typedef sizes until the end of the
readType recursion, when the full type graph is constructed.
Fixes#1601
* proc: allow simultaneous call injection to multiple goroutines
Changes the call injection code so that we can have multiple call
injections going on at the same time as long as they happen on distinct
goroutines.
* proc: fix EvalExpressionWithCalls for constant expressions
The lack of address of constant expressions would confuse EvalExpressionWithCalls
Fixes#1577
* tests: fix tests for Go 1.13
- Go 1.13 doesn't autogenerate init functions anymore, tests that
expected that now fail and should be skipped.
- Plugin tests now need -gcflags'all=-N -l' now, we were probably
getting lucky with -gcflags='-N -l' before.
* proc: allow signed integers as shift counts
Go1.13 allows signed integers to be used as the right hand side of a
shift operator, change eval to match.
* goversion: update maximum supported version
* travis: force Go to use vendor directory
Travis scripts get confused by "go: downloading" lines, the exact
reason is not clear. Testing that the vendor directory is up to date is
a good idea anyway.
Support for bulk queries makes the DWARF quality checker
(github.com/dr2chase/dwarf-goodness/cmd/dwarf-goodness)
run much more efficiently (replace quadratic cost with
linear).
The location specified '<fnname>:0' could be used to set a breakpoint
on the entry point of the function (as opposed to locspec '<fnname>'
which sets it after the prologue).
Setting a breakpoint on an entry point is almost never useful, the way
this feature was implemented could cause it to be used accidentally and
there are other ways to accomplish the same task (by setting a
breakpoint on the PC address directly).
The initial implementation of the 'call' command required the
function call to be the root expression, i.e. something like:
double(3) + 1
was not allowed, because the root expression was the binary operator
'+', not the function call.
With this change expressions like the one above and others are
allowed.
This is the first step necessary to implement nested function calls
(where the result of a function call is used as argument to another
function call).
This is implemented by replacing proc.CallFunction with
proc.EvalExpressionWithCalls. EvalExpressionWithCalls will run
proc.(*EvalScope).EvalExpression in a different goroutine. This
goroutine, the 'eval' goroutine, will communicate with the main
goroutine of the debugger by means of two channels: continueRequest
and continueCompleted.
The eval goroutine evaluates the expression recursively, when
a function call is encountered it takes care of setting up the
function call on the target program and writes a request to the
continueRequest channel, this causes the 'main' goroutine to restart
the target program by calling proc.Continue.
Whenever Continue encounters a breakpoint that belongs to the
function call injection protocol (runtime.debugCallV1 and associated
functions) it writes to continueCompleted which resumes the 'eval'
goroutine.
The 'eval' goroutine takes care of implementing the function call
injection protocol.
When the expression is fully evaluated the 'eval' goroutine will
write a special message to 'continueRequest' signaling that the
expression evaluation is terminated which will cause Continue to
return to the user.
Updates #119
This change splits the BinaryInfo object into a slice of Image objects
containing information about the base executable and each loaded shared
library (note: go plugins are shared libraries).
Delve backens are supposed to call BinaryInfo.AddImage whenever they
detect that a new shared library has been loaded.
Member fields of BinaryInfo that are used to speed up access to dwarf
(Functions, packageVars, consts, etc...) remain part of BinaryInfo and
are updated to reference the correct image object. This simplifies this
change.
This approach has a few shortcomings:
1. Multiple shared libraries can define functions or globals with the
same name and we have no way to disambiguate between them.
2. We don't have a way to handle library unloading.
Both of those affect C shared libraries much more than they affect go
plugins. Go plugins can't be unloaded at all and a lot of name
collisions are prevented by import paths.
There's only one problem that is concerning: if two plugins both import
the same package they will end up with multiple definition for the same
function.
For example if two plugins use fmt.Printf the final in-memory image
(and therefore our BinaryInfo object) will end up with two copies of
fmt.Printf at different memory addresses. If a user types
break fmt.Printf
a breakpoint should be created at *both* locations.
Allowing this is a relatively complex change that should be done in a
different PR than this.
For this reason I consider this approach an acceptable and sustainable
stopgap.
Updates #865
Remove the breakpoint set in TestCallConcurrent so that it doesn't
interfere with the call injection protocol.
The fact that it can is a bug but that bug is better addressed after
PRs #1503 and #1504 are merged, this keeps tests happy in the meantime.
Fixes#1542
RestoreRegisters on linux would also restore FS_BASE and GS_BASE, if
the target goroutine migrated to a different thread during the call
injection this would result in two threads of the target process
pointing to the same TLS area which would greatly confuse the target
runtime, leading to fatal panics with nonsensical stack traces.
Other backends are unaffected:
- native/windows doesn't store the TLS in the same CONTEXT struct as
the other register values.
- native/darwin doesn't support function calls (and wouldn't store the
TLS value in the same struct)
- gdbserial/rr doesn't support function calls (because it's a
recording)
- gsdbserial/lldb extracts the value of TLS by executing code in the
target process.
* *: use loglevel to control what gets logged instead of output redirection
This stops logrus from doing all the formatting just to discard it
immediately afterwards.
* logflags: replace default formatter of logrus
The default formatter of logrus emits logs in two different formats
depending on whether or not the output is going to a terminal. The
output format for non-terminals is indented to be machine readable, but
we mostly read logs ourselves and the excessive quoting makes that
format unreadable.
When outputting to terminals it uses ANSI escape codes unconditionally,
without checking whether the terminal it is connected to actually
supports colors.
This commit replaces the default formatter with a much simpler
formatter that always uses a more readable format, doesn't use colors
and places the key-value pairs at the beginning of the line (which is a
better match for how we use them).
* cmd/dlv: add command line options to redirect logs
Adds two options, --log-to-file and --log-to-fd, to redirect logs to a
file or to a file descriptor.
When one of those two options is specified the "API server listening
at:" message will also be redirected to the specified file/file
descriptor.
This allows clients that want to use the "API server listening at:"
message to do so even if they want to redirect the target's stdout to
another file or device.
Implements #1179, #1523
Adds initial support for plugins, this is only the code needed to keep
track of loaded plugins on linux (both native and gdbserial backend).
It does not actually implement support for debugging plugins on linux.
Updates #865
Like we do with unrecovered panics, create a default breakpoint to
catch runtime errors that will cause the program to terminate.
Primarily intended to give users the opportunity to examine the state
of a deadlocked process.
runtime.clone (on some operating systems?) work similarly to fork:
when a thread calls runtime.clone a new thread is created. For a
short period of time both the parent thread and the child thread
appear to be running the same goroutine, until the child thread
adjusts its TLS to point to the correct goroutine.
This means that proc.GetG for a thread that's currently running
'runtime.clone' could be wrong and, consequently, the field
proc.(G).thread of a G struct returned by GoroutinesInfo could be
also wrong. And, finally, that FindGoroutine could sometimes return
a *G with a bad associated thread if the goroutine of interest
recently called 'runtime.clone'.
To work around this problem this commit makes two changes:
1. proc.GetG will return nil for all threads executing runtime.clone.
2. FindGoroutine will return the selected goroutine as long as the
ID matches the one requested.
Change (1) takes care of the 'runtime.clone' problem. If we stop
the target process shortly after a thread executed the SYSCALL
instruction in 'runtime.clone' there are three possibilities:
a. Both the parent thread and the child thread are stopped inside
'runtime.clone'. In this case the state we report is slightly
incorrect, because both threads will be reported as not running any
goroutine when we do know which goorutine one of them (the parent)
is running. This doesn't actually matter since runtime.clone is
always called on the system stack and therefore the goroutine in
runtime.allgs will have the correct location.
b. The child thread managed to exit 'runtime.clone' but the parent
thread didn't. This is similar to (a) but in this case GetG on the
child thread will return the correct goroutine. GetG on the parent
thread will still return (incorrectly) nil but this doesn't matter
for the samer reason as described in (a).
c. The parent thread managed to exit 'runtime.clone' but the child
thread didn't. In this case GetG will return the correct goroutine
both for the parent thread (because it's not executing runtime.clone)
and the child thread.
Change (2) means that even if a thread has a completely nonsensical
TLS (for example because it's set through cgo) evaluating a variable
with a valid GoroutineID will still work as long as it's the current
goroutine (which is the most common case). This change also doubles
as an optimization for FindGoroutine.
Fixes#1469
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
When casting an integer into a struct pointer we make a fake pointer
variable that doesn't have an address, maybeDereference and
structMember should still work on this kind of Variable.
Fixes#1432
Minidumps are the windows equivalent of unix core files.
This commit updates pkg/proc/core so that it can open and read windows
minidumps.
Updates #794
It was never true that return variables were in the inverse order.
Instead in Go1.11 return variables are saved in debug_info in an
arbitrary order and inverting them just happened to work for this
specific example.
This bug was fixed in Go 1.12, regardless we should attempt to
rearrange return variables anyway.
Instead of unconditionally returning all present goroutines,
GoroutinesInfo now allows specifying a range (start and count). In
addition to the array of goroutines and the error, it now also returns
the next goroutine to be processed, to be used as 'start' argument on
the next call, or 0 if all present goroutines have already been
processed.
This way clients can avoid eating large amounts of RAM while debugging
core dumps and processes with a exceptionally high amount of goroutines.
Fixes#1403
Users can create sparse maps in two ways, either by:
a) adding lots of entries to a map and then deleting most of them, or
b) using the make(mapType, N) expression with a very large N
When this happens reading the resulting map will be very slow
because loadMap needs to scan many buckets for each entry it finds.
Technically this is not a bug, the user just created a map that's
very sparse and therefore very slow to read. However it's very
annoying to have the debugger hang for several seconds when trying
to read the local variables just because one of them (which you
might not even be interested into) happens to be a very sparse map.
There is an easy mitigation to this problem: not reading any
additional buckets once we know that we have already read all
entries of the map, or as many entries as we need to fulfill the
MaxArrayValues parameter.
Unfortunately this is mostly useless, a VLSM (Very Large Sparse Map)
with a single entry will still be slow to access, because the single
entry in the map could easily end up in the last bucket.
The obvious solution to this problem is to set a limit to the
number of buckets we read when loading a map. However there is no
good way to set this limit.
If we hardcode it there will be no way to print maps that are beyond
whatever limit we pick.
We could let users (or clients) specify it but the meaning of such
knob would be arcane and they would have no way of picking a good
value (because there is no objectively good value for it).
The solution used in this commit is to set an arbirtray limit on
the number of buckets we read but only when loadMap is invoked
through API calls ListLocalVars and ListFunctionArgs. In this way
`ListLocalVars` and `ListFunctionArgs` (which are often invoked
automatically by GUI clients) remain fast even in presence of a
VLSM, but the contents of the VLSM can still be inspected using
`EvalVariable`.
Continue did not resume execution after a call to CallFunction if the
point where the process was stopped, before the call CallFunction, was
a breakpoint.
Fixes#1374
Support for position independent executables (PIE) on the native linux
backend, the gdbserver backend on linux and the core backend.
Also implemented in the windows native backend, but it can't be tested
because go doesn't support PIE on windows yet.
On macOS 10.14 Apple changed the command line tools so that system
headers now need to be manually installed.
Instead of adding one extra install step to the install procedure add a
build tag to allow compilation of delve without the native backend on
macOS. By default (i.e. when using `go get`) this is how delve will be
compiled on macOS, the make script is changed to enable compiling the
native backend if the required dependencies have been installed.
Insure that both configuration still build correctly on Travis CI and
change the documentation to describe how to compile the native backend
and that it isn't normally needed.
Fixes#1359
This patch makes it so inlined functions are returned in the
function
list, and also allows users to set breakpoints on the call site of
inlined functions.
Fixes#1261
Adds -defer flag to the stack command that decorates the stack traces
by associating each stack frame with its deferred calls.
Reworks proc.next to use this feature instead of using proc.DeferPC,
laying the groundwork to implement #1240.
This pull request makes several changes to delve to allow headless
instancess that are started with the --accept-multiclient flag to
keep running even if there is no connected client. Specifically:
1. Makes a headless instance started with --accept-multiclient quit
after one of the clients sends a Detach request (previously they
would never ever quit, which was a bug).
2. Changes proc/gdbserial and proc/native so that they mark the
Process as exited after they detach, even if they did not kill the
process during detach. This prevents bugs such as #1231 where we
attempt to manipulate a target process after we detached from it.
3. On non --accept-multiclient instances do not kill the target
process unless we started it or the client specifically requests
it (previously if the client did not Detach before closing the
connection we would kill the target process unconditionally)
4. Add a -c option to the quit command that detaches from the
headless server after restarting the target.
5. Change terminal so that, when attached to --accept-multiclient,
pressing ^C will prompt the user to either disconnect from the
server or pause the target process. Also extend the exit prompt to
ask if the user wants to keep the headless server running.
Implements #245, #952, #1159, #1231
A user complained on the mailing list about having continuous
"optimized function warnings" on non-optimized functions when using 1.9.
This commit fixes the problem by disabling optimized function detection
on 1.9 and earlier (where it's impossible) and adds a test so we don't
break it again in the future.
Displays the return values of the current function when we step out of
it after executing a step, next or stepout command.
Implementation of this feature is tricky: when the function has
returned the return variables are not in scope anymore. Implementing
this feature requires evaluating variables that are out of scope, using
a stack frame that doesn't exist anymore.
We can't calculate the address of these variables when the
next/step/stepout command is initiated either, because between that
point and the time where the stepout breakpoint is actually hit the
goroutine stack could grow and be moved to a different memory address.
Add a new method "Common" to proc.Process that returns a pointer to a
struct that pkg/proc can use to store its things, independently of the
backend.
This is used here to replace the AllGCache typecasts, it will also be
used to store the return values of the stepout breakpoint and the state
for injected function calls.
Go1.11 uses the is_stmt flag of .debug_line to communicate which
assembly instructions are good places for breakpoints, we should
respect this flag.
These changes were introduced by:
* https://go-review.googlesource.com/c/go/+/102435/
Additionally when setting next breakpoints ignore all PC addresses that
belong to the same line as the one currently under at the cursor. This
matches the behavior of gdb and avoids stopping multiple times at the
heading line of a for statement with go1.11.
Change: https://go-review.googlesource.com/c/go/+/110416 adds the
prologue_end flag to the .debug_line section to communicate the end of
the stack-split prologue. We should use it instead of pattern matching
the disassembly when available.
Fixes#550
type of interfaces
'c7cde8b'.
Maps were always loaded with using the default configuration during a
reslice. This is probably a remnant from when we didn't let clients
configure the load parameters.
