* terminal/command: Add 'reload' command
These changes add the 'reload' command, which allows us to rebuild the project
and start the debugging session again. Currently, if the project's code is
updated while debugging it, Delve shows the new source code, but it's still
running the old one. With 'reload', the whole binary is rebuilt, and the
process starts again.
Fixes#1551
* Remove unnecessary print
Changes to be committed:
modified: pkg/terminal/command.go
* Add tests and refactor the code
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: go.mod
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
* Fix typo in the comment
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typo in the name of the variables
The variables are local therefore the capitalization is not needed
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
* Call GoTestBuild
Also, remove the := to avoid redeclaration
* Change the Kind in the tests
Change from debugger.ExecutingGeneratedTest to
debugger.ExecutingGeneratedFile for consistency.
We are generating a real binary instead of a test
one so ExecutingGeneratedFile makes more sense here.
Changes to be committed:
modified: service/test/integration2_test.go
* Avoid breakpoints based on addresses
Changes to be committed:
modified: service/debugger/debugger.go
* Update the rebuild behaviour
There are a few cases where we can't rebuild the binary because we don't
know how it was build.
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typos and update documentation
Changes to be committed:
modified: Documentation/cli/README.md
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
* Fix typo
* Remove variables
They were added to the debugger.Config
* Rename variable
Rename Kind to ExecuteKind to make it more accurate
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
Changes implementations of proc.Registers interface and the
op.DwarfRegisters struct so that floating point registers can be loaded
only when they are needed.
Removes the floatingPoint parameter from proc.Thread.Registers.
This accomplishes three things:
1. it simplifies the proc.Thread.Registers interface
2. it makes it impossible to accidentally create a broken set of saved
registers or of op.DwarfRegisters by accidentally calling
Registers(false)
3. it improves general performance of Delve by avoiding to load
floating point registers as much as possible
Floating point registers are loaded under two circumstances:
1. When the Slice method is called with floatingPoint == true
2. When the Copy method is called
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 4327350142 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 3852642917 ns/op
Updates #1549
* cmd/dlv,debugger: Improve dlv trace and trace command output
This patch improves the `dlv trace` subcommand output by reducing the
noise that is generated and providing clearer more concise information.
Also adds new tests closing a gap in our testing (we previously never
really tested this subcommand).
This patch also fixes the `dlv trace` REPL command to behave like the
subcommand in certain situations. If the tracepoint is for a function,
we now show function arguements and return values properly.
Also makes the overall output of the trace subcommand clearer.
Fixes#2027
This flag allows users on UNIX systems to set the tty for the program
being debugged by Delve. This is useful for debugging command line
applications which need access to their own TTY, and also for
controlling the output of the debugged programs so that IDEs may open a
dedicated terminal to show the output for the process.
Allows Delve clients to stop a recording midway by sending a
Command('halt')
request.
This is implemented by changing debugger.New to start recording the
process on a separate goroutine while holding the processMutex locked.
By locking the processMutex we ensure that almost all RPC requests will
block until the recording is done, since we can not respond correctly
to any of them.
API calls that do not require manipulating or examining the target
process, such as "IsMulticlient", "SetApiVersion" and
"GetState(nowait=true)" will work while we are recording the process.
Two other internal changes are made to the API: both GetState and
Restart become asynchronous requests, like Command. Restart because
this way it can be interrupted by a StopRecording request if the
rerecord option is passed.
GetState because clients need a call that will block until the
recording is compelted and can also be interrupted with a
StopRecording.
Clients that are uninterested in allowing the user to stop a recording
can ignore this change, since eventually they will make a request to
Delve that will block until the recording is completed.
Clients that wish to support this feature must:
1. call GetState(nowait=false) after connecting to Delve, before any
call that would need to manipulate the target process
2. allow the user to send a StopRecording request during the initial
GetState call
3. allow the user to send a StopRecording request during any subsequent
Restart(rerecord=true) request (if supported).
Implements #1747
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
* proc: move defer breakpoint code into a function
Moves the code that sets a breakpoint on the first deferred function,
used by both next and StepOut, to its function.
* proc: implement reverse step/next/stepout
When the direction of execution is reversed (on a recording) Step, Next and
StepOut will behave similarly to their forward version. However there are
some subtle interactions between their behavior, prologue skipping, deferred
calls and normal calls. Specifically:
- when stepping backwards we need to set a breakpoint on the first
instruction after each CALL instruction, once this breakpoint is reached we
need to execute a single StepInstruction operation to reverse step into the
CALL.
- to insure that the prologue is skipped reverse next needs to check if it
is on the first instruction after the prologue, and if it is behave like
reverse stepout.
- there is no reason to set breakpoints on deferred calls when reverse
nexting or reverse stepping out, they will never be hit.
- reverse step out should generally place its breakpoint on the CALL
instruction that created the current stack frame (which will be the CALL
instruction immediately preceding the instruction at the return address).
- reverse step out needs to treat panic calls and deferreturn calls
specially.
* service,terminal: implement reverse step, next, stepout
Implement debugging function for 386 on linux with reference to AMD64.
There are a few remaining problems that need to be solved in another time.
1. The stacktrace of cgo are not exactly as expected.
2. Not implement `core` for now.
3. Not implement `call` for now. Can't not find `runtime·debugCallV1` or
similar function in $GOROOT/src/runtime/asm_386.s.
Update #20
Adds an optional scope prefix to the `regs` command which allows
printing registers for any stack frame (as long as they were somehow
saved). Issue #1838 is not yet to be closed since we are still not
recovering the registers of a segfaulting frame.
Updates #1838
According to #1800#1584#1038, `dlv` should enable the user to dive into
memory. User can print binary data in specific memory address range.
But not support for sepecific variable name or structures temporarily.(Because
I have no idea that modify `print` command.)
Close#1584.
A significant amount of time is spent generating the string
representation for the proc.Registers object of each thread, since this
field is rarely used (only when the Registers API is called) it should
be generated on demand.
Also by changing the internal representation of proc.Register to be
closer to that of op.DwarfRegister it will help us implement #1838
(when Delve will need to be able to display the registers of an
internal frame, which we currently represent using op.DwarfRegister
objects).
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 22292554301 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 17326345671 ns/op
Reduces conditional breakpoint latency from 2.2ms to 1.7ms.
Updates #1549, #1838
* pkg/proc: Introduce Target
* pkg/proc: Remove Common.fncallEnabled
Realistically we only block it on recorded backends.
* pkg/proc: Move fncallForG to Target
* pkg/proc: Remove CommonProcess
Remove final bit of functionality stored in CommonProcess and move it to
*Target.
* pkg/proc: Add SupportsFunctionCall to Target
Adds an API call that returns a list of packages contained in the
program and the files that were used to build them, and also a best
guess at which filesystem directory contained the package when it was
built.
This can be used by IDEs to map file paths if the debugging environment
doesn't match the build environment exactly.
Changes CreateBreakpoint to create a logical breakpoint when multiple
addresses are specified, FindLocation and the api.Location type to
return logical locations and the cli to support logical breakpoints.
Modifies FindFileLocation, FindFunctionLocation and LineToPC as well as
service/debugger to support inlining and introduces the concept of
logical breakpoints.
For inlined functions FindFileLocation, FindFunctionLocation and
LineToPC will now return one PC address for each inlining and one PC
for the concrete implementation of the function (if present).
A proc.Breakpoint will continue to represent a physical breakpoint, at
a single memory location.
Breakpoints returned by service/debugger, however, will represent
logical breakpoints and may be associated with multiple memory
locations and, therefore, multiple proc.Breakpoints.
The necessary logic is introduced in service/debugger so that a change
to a logical breakpoint will be mirrored to all its physical
breakpoints and physical breakpoints are aggregated into a single
logical breakpoint when returned.
Make the 'list' command succeed for file:line expressions that don't
map to any instruction.
Adds an argument to the FindLocations API call that makes FindLocations
return if the expression can be parsed, even if it doesn't end up
matching any instruction in debug_line.
Adds a '-r' option to the 'restart' command (and to the Restart API)
that re-records the target when using rr.
Also moves the code to delete the trace directory inside the gdbserial
package.
Add options to start a stacktrace from the values saved in the
runtime.g struct as well as a way to disable the stackSwitch logic and
just get a normal stacktrace.
* proc: allow simultaneous call injection to multiple goroutines
Changes the call injection code so that we can have multiple call
injections going on at the same time as long as they happen on distinct
goroutines.
* proc: fix EvalExpressionWithCalls for constant expressions
The lack of address of constant expressions would confuse EvalExpressionWithCalls
Fixes#1577
The location specified '<fnname>:0' could be used to set a breakpoint
on the entry point of the function (as opposed to locspec '<fnname>'
which sets it after the prologue).
Setting a breakpoint on an entry point is almost never useful, the way
this feature was implemented could cause it to be used accidentally and
there are other ways to accomplish the same task (by setting a
breakpoint on the PC address directly).
The initial implementation of the 'call' command required the
function call to be the root expression, i.e. something like:
double(3) + 1
was not allowed, because the root expression was the binary operator
'+', not the function call.
With this change expressions like the one above and others are
allowed.
This is the first step necessary to implement nested function calls
(where the result of a function call is used as argument to another
function call).
This is implemented by replacing proc.CallFunction with
proc.EvalExpressionWithCalls. EvalExpressionWithCalls will run
proc.(*EvalScope).EvalExpression in a different goroutine. This
goroutine, the 'eval' goroutine, will communicate with the main
goroutine of the debugger by means of two channels: continueRequest
and continueCompleted.
The eval goroutine evaluates the expression recursively, when
a function call is encountered it takes care of setting up the
function call on the target program and writes a request to the
continueRequest channel, this causes the 'main' goroutine to restart
the target program by calling proc.Continue.
Whenever Continue encounters a breakpoint that belongs to the
function call injection protocol (runtime.debugCallV1 and associated
functions) it writes to continueCompleted which resumes the 'eval'
goroutine.
The 'eval' goroutine takes care of implementing the function call
injection protocol.
When the expression is fully evaluated the 'eval' goroutine will
write a special message to 'continueRequest' signaling that the
expression evaluation is terminated which will cause Continue to
return to the user.
Updates #119
This change splits the BinaryInfo object into a slice of Image objects
containing information about the base executable and each loaded shared
library (note: go plugins are shared libraries).
Delve backens are supposed to call BinaryInfo.AddImage whenever they
detect that a new shared library has been loaded.
Member fields of BinaryInfo that are used to speed up access to dwarf
(Functions, packageVars, consts, etc...) remain part of BinaryInfo and
are updated to reference the correct image object. This simplifies this
change.
This approach has a few shortcomings:
1. Multiple shared libraries can define functions or globals with the
same name and we have no way to disambiguate between them.
2. We don't have a way to handle library unloading.
Both of those affect C shared libraries much more than they affect go
plugins. Go plugins can't be unloaded at all and a lot of name
collisions are prevented by import paths.
There's only one problem that is concerning: if two plugins both import
the same package they will end up with multiple definition for the same
function.
For example if two plugins use fmt.Printf the final in-memory image
(and therefore our BinaryInfo object) will end up with two copies of
fmt.Printf at different memory addresses. If a user types
break fmt.Printf
a breakpoint should be created at *both* locations.
Allowing this is a relatively complex change that should be done in a
different PR than this.
For this reason I consider this approach an acceptable and sustainable
stopgap.
Updates #865
Before doing anything check that the version of Go is compatible with
the current version of Delve.
This will improve the error message in the case that another change as
disruptive as Go1.11 dwarf compression, happens.
* *: use loglevel to control what gets logged instead of output redirection
This stops logrus from doing all the formatting just to discard it
immediately afterwards.
* logflags: replace default formatter of logrus
The default formatter of logrus emits logs in two different formats
depending on whether or not the output is going to a terminal. The
output format for non-terminals is indented to be machine readable, but
we mostly read logs ourselves and the excessive quoting makes that
format unreadable.
When outputting to terminals it uses ANSI escape codes unconditionally,
without checking whether the terminal it is connected to actually
supports colors.
This commit replaces the default formatter with a much simpler
formatter that always uses a more readable format, doesn't use colors
and places the key-value pairs at the beginning of the line (which is a
better match for how we use them).
* cmd/dlv: add command line options to redirect logs
Adds two options, --log-to-file and --log-to-fd, to redirect logs to a
file or to a file descriptor.
When one of those two options is specified the "API server listening
at:" message will also be redirected to the specified file/file
descriptor.
This allows clients that want to use the "API server listening at:"
message to do so even if they want to redirect the target's stdout to
another file or device.
Implements #1179, #1523
Adds initial support for plugins, this is only the code needed to keep
track of loaded plugins on linux (both native and gdbserial backend).
It does not actually implement support for debugging plugins on linux.
Updates #865
The repository is being switched from the personal account
github.com/derekparker/delve to the organization account
github.com/go-delve/delve. This patch updates imports and docs, while
preserving things which should not be changed such as my name in the
CHANGELOG and in TODO comments.
Instead of unconditionally returning all present goroutines,
GoroutinesInfo now allows specifying a range (start and count). In
addition to the array of goroutines and the error, it now also returns
the next goroutine to be processed, to be used as 'start' argument on
the next call, or 0 if all present goroutines have already been
processed.
This way clients can avoid eating large amounts of RAM while debugging
core dumps and processes with a exceptionally high amount of goroutines.
Fixes#1403
This patch allows the `trace` CLI subcommand to display return values of
a function. Additionally, it will also display information on where the
function exited, which could also be helpful in determining the path
taken during function execution.
Fixes#388
