If the process receives a signal (or sends a singal to itself) and then
dies before we can route the signal back to it we still need to
retrieve its exit status.
Fixes a rare failure of TestIssue1101 in proc_test.go
Co-authored-by: a <a@kra>
* proc/tests: keep track of tests skipped due to backend problems
Mark tests skipped due to backend problems and add a script to keep
track of them.
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
* proc: use argument position for addr only when injecting function calls
We can not, in general, use the argument position to determine the
address of a formal parameter, it will not work in presence of
optimizations or inlining. In those cases formal arguments could be
stored in registers.
Fixes#2176
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Co-authored-by: a <a@kra>
* dwarf/line: ignore end_of_sequence entry if AllPCsBetween
Go 1.15 (but possibly prior versions of Go too) has a tendency to use
an address in the middle of an instruction for this entry, but if it
was correct it would be after the last instruction of the function
anyway.
This problem manifests especially frequently as a target crash in
TestStepConcurrentPtr on linux/arm64 (~6% of the runs).
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Co-authored-by: a <a@kra>
* Revert "proc: Find executable should follow symbol links."
This reverts commit 3e04ad0fada0c3ab57caf58bc024e4c0f9a3e01a.
* proc: resolve symlinks when searching for split debug_info if path is /proc/pid/exe
Fixes#2168
During the testing of the core dump generation feature two bugs were
discovered in gdbserial:
1. we don't check that both bytes of the checksum are read, if the
buffer only has one byte we can end up reading only one byte instead
of two and the second byte will mess up the parsing of the next
packet
2. binary encoded packets can start with an 'E' and not be errors, when
using binary responses add an extra check for the lenght of the
response before deciding that the response is an error.
Unfortunately this encoding is inherently ambiguous (we can't
distinguish a 3 byte response starting with 'E' from an error) so
binary requests that lead to short responses should be avoided.
Testing this is complicated, they will be tested implicitly by the
upcoming core dump test.
Co-authored-by: a <a@kra>
Since proc is supposed to work independently from the target
architecture it shouldn't use architecture-dependent types, like
uintptr. For example when reading a 64bit core file on a 32bit
architecture, uintptr will be 32bit but the addresses proc needs to
represent will be 64bit.
Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
An internal breakpoint condition shouldn't ever error:
* use a ThreadContext to evaluate conditions if a goroutine isn't
available
* evaluate runtime.curg to a fake g variable containing only
`goid == 0` when there is no current goroutine
Fixes#2113
Recent changes to the way registers are handled broke reporting of AVX
registers (i.e. YMMx). This change restores the functionality by:
- concatenating the higher half of the YMMx registers to their
corresponding XMMx lower half (YMMx registers do not have an
independent DWARF register number)
- modifying the formatSSEReg function to handle them when they are
present.
Fixes#2033
Commit 1ee8d5c reviewed in Pull Request #1960 relaxed some tests using
goroutinestackprog but missed others.
Fixes some test flakiness that isn't relevant.
* proc: start variable visibility one line after their decl line
In most cases variables shouldn't be visible on their declaration line
because they won't be initialized there.
Function arguments are treated as an exception.
This fix is only applied to programs compiled with Go 1.15 or later as
previous versions of Go did not report the correct declaration line for
variables captured by closures.
Fixes#1134
* proc: silence go vet error
* Makefile: enable PIE tests on windows/Go 1.15
* core: support core files for PIEs on windows
* goversion: add Go 1.15 to supported versions
* proc: fix function call injection for Go 1.15
Go 1.15 changed the call injection protocol so that the runtime will
execute the injected call on a different (new) goroutine.
This commit changes the function call support in delve to:
1. correctly track down the call injection state after the runtime
switches to a different goroutine.
2. correctly perform the escapeCheck when stack values can come from
multiple goroutine stacks.
* proc: miscellaneous fixed for call injection under macOS with go 1.15
- create copy of SP in debugCallAXCompleteCall case because the code
used to assume that regs doesn't change
- fix automatic address calculation for function arguments when an
argument has a spurious DW_OP_piece at entry
The file:line information for the entrypoint is more acccurate than the
file:line information at a return point, which could be affected by a
compiler bug.
Fixes#2086
Recent change #2061:
292f5c69f0c769fd32c2e8b1e7153b56e908efd7
proc: step into unexported runtime funcs when already inside runtime
means that TestIssue414 (which tries to step repeatedly until the
program exits) can now steps through way more runtime code than it ever
did before. This causes this test to occasionally fail. Stepping
blindly through runtime code has never been particularly safe as the
runtime can switch to a different goroutine causing Delve to misbehave.
This change restores the previous behavior of TestIssue414 where Step
behaved like Next inside runtime code.
These methods only work if registers have been loaded once after the
last resume, there's probably no code path that calls SetXX before
Thread.Registers but lets make sure it can't happen anyway.
On platforms other than macOS this doesn't matter but on macOS a
segmentation fault will cause ContinueOnce to return an error, before
returning it we should still fix the current thread and selected
goroutine values.
Fixes#2078
* terminal/command: Add 'reload' command
These changes add the 'reload' command, which allows us to rebuild the project
and start the debugging session again. Currently, if the project's code is
updated while debugging it, Delve shows the new source code, but it's still
running the old one. With 'reload', the whole binary is rebuilt, and the
process starts again.
Fixes#1551
* Remove unnecessary print
Changes to be committed:
modified: pkg/terminal/command.go
* Add tests and refactor the code
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: go.mod
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
* Fix typo in the comment
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typo in the name of the variables
The variables are local therefore the capitalization is not needed
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
* Call GoTestBuild
Also, remove the := to avoid redeclaration
* Change the Kind in the tests
Change from debugger.ExecutingGeneratedTest to
debugger.ExecutingGeneratedFile for consistency.
We are generating a real binary instead of a test
one so ExecutingGeneratedFile makes more sense here.
Changes to be committed:
modified: service/test/integration2_test.go
* Avoid breakpoints based on addresses
Changes to be committed:
modified: service/debugger/debugger.go
* Update the rebuild behaviour
There are a few cases where we can't rebuild the binary because we don't
know how it was build.
Changes to be committed:
modified: service/debugger/debugger.go
* Fix typos and update documentation
Changes to be committed:
modified: Documentation/cli/README.md
modified: pkg/terminal/command.go
modified: service/config.go
modified: service/debugger/debugger.go
* Fix typo
* Remove variables
They were added to the debugger.Config
* Rename variable
Rename Kind to ExecuteKind to make it more accurate
Changes to be committed:
modified: cmd/dlv/cmds/commands.go
modified: service/debugger/debugger.go
modified: service/test/integration2_test.go
Normally we don't step into unexported runtime functions because the
compiler is free to insert them into the code and they are not relevant
to the user, however if we are already stepping through a runtime
function we should let step into work normally and step into other
runtime functions.
This issue causes a failure of TestTracePid that was observed in CI:
https://travis-ci.com/github/go-delve/delve/jobs/343053383
I'm not sure what causes it in this particular instance but there are
several ways in which a thread stopped at a breakpoint might have a
BreakpointInfo == nil field (see variable withBreakpointInfo in
debugger.Debugger.Command).
Changes implementations of proc.Registers interface and the
op.DwarfRegisters struct so that floating point registers can be loaded
only when they are needed.
Removes the floatingPoint parameter from proc.Thread.Registers.
This accomplishes three things:
1. it simplifies the proc.Thread.Registers interface
2. it makes it impossible to accidentally create a broken set of saved
registers or of op.DwarfRegisters by accidentally calling
Registers(false)
3. it improves general performance of Delve by avoiding to load
floating point registers as much as possible
Floating point registers are loaded under two circumstances:
1. When the Slice method is called with floatingPoint == true
2. When the Copy method is called
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 4327350142 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 3852642917 ns/op
Updates #1549
* cmd/dlv,debugger: Improve dlv trace and trace command output
This patch improves the `dlv trace` subcommand output by reducing the
noise that is generated and providing clearer more concise information.
Also adds new tests closing a gap in our testing (we previously never
really tested this subcommand).
This patch also fixes the `dlv trace` REPL command to behave like the
subcommand in certain situations. If the tracepoint is for a function,
we now show function arguements and return values properly.
Also makes the overall output of the trace subcommand clearer.
Fixes#2027
The option is "source-list-line-count". It defaults to 5, which was previously
hardcoded in printfile(), but now you can change it dynamically, for instance:
$ config source-list-line-count 20
$ list
When trying to compile tests in a package that does not contain tests
'go' emits an error message on stdout instead of stderr. Let the 'go'
command write to stdout too.
Fixes#2042
Unexport `GetDebugServerAbsolutePath` and avoid unnecessary repeated calls.
Remove `os.Stat` because `Exec.LookPath` has already used `os.Stat`.And Fix
some comments.
When there is a single piece and it's a register value just return it.
This is important for clang compiled programs which will use DW_OP_regN
to specify the value of the frame base.
On linux platform, we simply treated `/proc/$pid/exe` as the
executable of targeting process when doing `dlv attach`. The
`/proc/$pid/exe` is a symbol link of the real executable file.
Delve couldn't find the corrsponding external debug file based on the
symbol link:
```
could not attach to pid $pid: could not open debug info
```
The fix is to evaluate the symbol links to the actual executable path.
The process could quit while we are inside stop, we should report the
error otherwise the following code will try to send on the closed
ptrace channel.
Fixes a sporadic error in TestIssue1101.
This flag allows users on UNIX systems to set the tty for the program
being debugged by Delve. This is useful for debugging command line
applications which need access to their own TTY, and also for
controlling the output of the debugged programs so that IDEs may open a
dedicated terminal to show the output for the process.
* dwarf/line: implement DW_LNE_set_discriminator
We don't use the discriminator field in any way but we need to at least
parse it to support debub_line programs that use it.
* dwarf/line: support parsing DWARF4 debug_line sections
There is an extra field maximum_operations_per_instruction that is used
for VLIW CPUs. We don't support this feature but we have to at least
parse the field to not crash.
* gdbserial/gdbserver: Dynamically resolve debugserver binary
Instead of hardcoding the absolute path to the Command Line
Tools (CLT) binary, will attempt to resolve the path at the
$PATH, or at the Xcode bundle. If none are available, will
fallback to the default CLT location.
Fixes#986
* gdbserial/gdbserver: Log outgoing executed commands
Add logging to capture the executable and associated arguments used
in LLDBLaunch and LLDBAttach
Related to #986
* gdbserial/gdbserver: Add unit tests for helper function
Define unit tests for helper function. Setup each test to temporarily make
PATH variable, and file system changes, and subsequently revert them.
Related to #986
* gdbserial/gdbserver: Lazily load function
Lazily obtain absolute path to avoid increasing load times.
Remove flaky tests.
Related to #986
The test was always flaky because we can't fully control the state of
all goroutines in the target program, Go 1.14's asynchronous preemption
exacerbates the problem.
See for example:
https://travis-ci.com/github/go-delve/delve/jobs/302407282
This commit relaxes the checks made by the test to avoid irrelevante
flakiness.
Under some circumstances (methods with non-pointer receivers or from
embedded fields called through an interface) the compiler will
autogenerate wrapper functions.
This commit changes next, step and stepout to skip all autogenerated
wrappers.
Fixes#1908
Allows Delve clients to stop a recording midway by sending a
Command('halt')
request.
This is implemented by changing debugger.New to start recording the
process on a separate goroutine while holding the processMutex locked.
By locking the processMutex we ensure that almost all RPC requests will
block until the recording is done, since we can not respond correctly
to any of them.
API calls that do not require manipulating or examining the target
process, such as "IsMulticlient", "SetApiVersion" and
"GetState(nowait=true)" will work while we are recording the process.
Two other internal changes are made to the API: both GetState and
Restart become asynchronous requests, like Command. Restart because
this way it can be interrupted by a StopRecording request if the
rerecord option is passed.
GetState because clients need a call that will block until the
recording is compelted and can also be interrupted with a
StopRecording.
Clients that are uninterested in allowing the user to stop a recording
can ignore this change, since eventually they will make a request to
Delve that will block until the recording is completed.
Clients that wish to support this feature must:
1. call GetState(nowait=false) after connecting to Delve, before any
call that would need to manipulate the target process
2. allow the user to send a StopRecording request during the initial
GetState call
3. allow the user to send a StopRecording request during any subsequent
Restart(rerecord=true) request (if supported).
Implements #1747
Reset the timer once we start executing the code paths we actually care
to measure, since the setup and continue steps can be relatively
expensive.
Also, disable recording on benchmarks. This seems less useful, and also
cuts out a lot of noise when benchmarks are run.
When switching to the goroutine stack the stack iterator registers
might not have any entry for the BP register, make sure to add it
instead of just trying to change it.
Instead of rescanning debug_info every time we want to read a function
(either to find inlined calls or its variables) cache the tree of
dwarf.Entry that we would generate and use that.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 5164689165 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 4817425836 ns/op
Updates #1549
Add logging for Issue #1927. The bug happens during the call to
api.ConvertThread, returning an error will not suffice since
ConvertThread will not surface it.
Updates #1927
Inserts a call to ClearAllGCache into stepInstructionOut so that cached
goroutine state is not inconsistent after an injected function call.\
Fixes#1925
Autogenerates .travis.yml configuration using the contents of
pkg/goversion/compat.go.
Also:
- excludes testing of windows/amd64/tip and linux/arm64/tip (Travis-CI
can't get Go at tip for those combinations).
- Removes Go 1.11 from pkg/goversion/compat.go which we don't test
anymore.
If we call one expression which is the fake method of meanless
string, `delve` will panic. Strengthen the inspection of boundary
conditions when supporting function calls on non-struct types.
Update: #1871
* *: Fix go vet struct complaints
* *: Fix struct vet issue on linux
* *: Ignore proc/native in go vet check
We have to do some unsafe pointer manipulation that will never make go
vet happy within the proc/native package. Ignore it for runs of go vet.
* proc: move defer breakpoint code into a function
Moves the code that sets a breakpoint on the first deferred function,
used by both next and StepOut, to its function.
* proc: implement reverse step/next/stepout
When the direction of execution is reversed (on a recording) Step, Next and
StepOut will behave similarly to their forward version. However there are
some subtle interactions between their behavior, prologue skipping, deferred
calls and normal calls. Specifically:
- when stepping backwards we need to set a breakpoint on the first
instruction after each CALL instruction, once this breakpoint is reached we
need to execute a single StepInstruction operation to reverse step into the
CALL.
- to insure that the prologue is skipped reverse next needs to check if it
is on the first instruction after the prologue, and if it is behave like
reverse stepout.
- there is no reason to set breakpoints on deferred calls when reverse
nexting or reverse stepping out, they will never be hit.
- reverse step out should generally place its breakpoint on the CALL
instruction that created the current stack frame (which will be the CALL
instruction immediately preceding the instruction at the return address).
- reverse step out needs to treat panic calls and deferreturn calls
specially.
* service,terminal: implement reverse step, next, stepout
* proc,proc/*: move SelectedGoroutine to proc.Target, remove PostInitializationSetup
moves SelectedGoroutine, SwitchThread and SwitchGoroutine to
proc.Target, merges PostInitializationSetup with NewTarget.
* proc,proc/*: add StopReason field to Target
Adds a StopReason field to the Target object describing why the target
process is currently stopped. This will be useful for the DAP server
(which needs to report this reason in one of its requests) as well as
making pull request #1785 (reverse step) conformant to the new
architecture.
* proc: collect NewTarget arguments into a struct
Implement debugging function for 386 on linux with reference to AMD64.
There are a few remaining problems that need to be solved in another time.
1. The stacktrace of cgo are not exactly as expected.
2. Not implement `core` for now.
3. Not implement `call` for now. Can't not find `runtime·debugCallV1` or
similar function in $GOROOT/src/runtime/asm_386.s.
Update #20
* proc/native/linux: only set breakpoints on threads that receive SIGTRAP
* proc/native/linux: do not call (*Thread).Stopped inside (*Process).stop
(*Thread).Stopped is slow because it needs to open, read and parse a
file in /proc, we don't actually need to do that, we can just rely on
the value of Thread.os.running.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 12476166303 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 10403533675 ns/op
Conditional breakpoint evaluation: 1.24ms -> 1ms
Updates #1549
This change adds `ProcessVmRead` and `ProcessVmWrite` wrappers around
the syscalls `process_vm_readv` and `process_vm_writev`, available since
Linux 3.2. These follow the same permission model as `ptrace`, but they
don't actually require being attached, which means they can be called
directly from any thread in the debugger. They also use `iovec` to write
entire blocks at once, rather than having to peek/poke each `uintptr`.
These wrappers are used in `Thread.ReadMemory` and `WriteMemory`, still
falling back to `ptrace` if that fails for any reason. Notably,
`process_vm_writev` respects memory protection, so it can't modify
read-only memory like `ptrace`. This frequently occurs when writing
breakpoints in read-only `.text`, so to avoid a lot of wasted `EFAULT`
calls, we only try `process_vm_writev` for larger writes.
1. Don't use intelligent '#' in fmt of go because it is not always satisfying
for diffrent version of golang. Always keep one leading zero for octal and
one leading '0x' for hex manually. Then keep alignment for every byte.
2. Always keep addr alignment when the lens of two adjacent address are
different.
Update #1814.
Adds an optional scope prefix to the `regs` command which allows
printing registers for any stack frame (as long as they were somehow
saved). Issue #1838 is not yet to be closed since we are still not
recovering the registers of a segfaulting frame.
Updates #1838
As we rearrange the code and the Go compiler changes the error message
returned by the compiler on unsupported architectures will change too,
making it un-googlable. Since the error message tends to be rather
obscure too this regularly confuses newbies.
This is an effort to make the error message for unsupported GOOS/GOARCH
combinations the same across all unsupported combinations and to make
it more user friendly.
Directories containing Go source code are supposed to contain a single
package. This property happens to be checked by cmd/go itself so it
will happen even before the syntax is fully checked and therefore has a
high probability of being the first (and only) error message being
print.
Here we take advantage of this by adding to the pkg/proc/native
directory a file with a bad package line that only gets compiled in on
unsupported GOOS/GOARCH combinations.
At present the error message for compiling Delve on unsupported systems
will be:
service/debugger/debugger.go:21:2: found packages native (proc.go) and your_operating_system_and_architecture_combination_is_not_supported_by_delve (support_sentinel.go) in $PATH_TO_DELVE/pkg/proc/native
* Fixed DirIdx (index starts at one)
I am using the elf to load C++ based elf and there the index starts at one and not zero, hence the minor fix.
* Added test
* Added proper test for c-generated elf & replaced index offset by adding build dir
* Changed other IncludeDir test
* Format fix & replace print with actual test
* Format fixes @derekparker requested.
Go 1.8 has been out of date for a while and the code to support it is
potentially dangerous if a future version of Go removes the runtime
types from debug_info and also changes their representation.
Removes the restriction that the DWARF type for the receiver of a method
must be a TypeDef. This seems reasonable in practice, but it turns out
Go DWARF does not consider
```
type X int
```
to be a typedef. This patch also allows for calling a method where the
receiver is not used or passed in, such as:
```
func (_ X) Method() { println("why") }
```
runtime.g is a large and growing struct, we only need a few fields.
Instead of using loadValue to load the full contents of g, cache its
memory and then only load the fields we care about.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 14586710018 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 12476166303 ns/op
Conditional breakpoint evaluation: 1.45ms -> 1.24ms
Updates #1549
Instead of reloading the registers for every thread every time the
process executes, reload the registers on demand for individual threads
and memoize the result.
According to #1800#1584#1038, `dlv` should enable the user to dive into
memory. User can print binary data in specific memory address range.
But not support for sepecific variable name or structures temporarily.(Because
I have no idea that modify `print` command.)
Close#1584.
The stacktrace code occasionally needs the value of g.m.g0.sched.sp to
switch stacks. Since this is only needed rarely and calling parseG is
relatively expensive we should delay doing it until we know it will be
needed.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 17326345671 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 15649407130 ns/op
Reduces conditional breakpoint latency from 1.7ms to 1.56ms.
Updates #1549
A significant amount of time is spent generating the string
representation for the proc.Registers object of each thread, since this
field is rarely used (only when the Registers API is called) it should
be generated on demand.
Also by changing the internal representation of proc.Register to be
closer to that of op.DwarfRegister it will help us implement #1838
(when Delve will need to be able to display the registers of an
internal frame, which we currently represent using op.DwarfRegister
objects).
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 22292554301 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 17326345671 ns/op
Reduces conditional breakpoint latency from 2.2ms to 1.7ms.
Updates #1549, #1838
* tests: misc test fixes for go1.14
- math.go is now ambiguous due to changes to the go runtime so specify
that we mean our own math.go in _fixtures
- go list -m requires vendor-mode to be disabled so pass '-mod=' to it
in case user has GOFLAGS=-mod=vendor
- update version of go/packages, required to work with go 1.14 (and
executed go mod vendor)
- Increased goroutine migration in one development version of Go 1.14
revealed a problem with TestCheckpoints in command_test.go and
rr_test.go. The tests were always wrong because Restart(checkpoint)
doesn't change the current thread but we can't assume that when the
checkpoint was taken the current goroutine was running on the same
thread.
* goversion: update maximum supported version
* Makefile: disable testing lldb-server backend on linux with Go 1.14
There seems to be some incompatibility with lldb-server version 6.0.0
on linux and Go 1.14.
* proc/gdbserial: better handling of signals
- if multiple signals are received simultaneously propagate all of them to the
target threads instead of only one.
- debugserver will drop an interrupt request if a target thread simultaneously
receives a signal, handle this situation.
* dwarf/line: normalize backslashes for windows executables
Starting with Go 1.14 the compiler sometimes emits backslashes as well
as forward slashes in debug_line, normalize everything to / for
conformity with the behavior of previous versions.
* proc/native: partial support for Windows async preempt mechanism
See https://github.com/golang/go/issues/36494 for a description of why
full support for 1.14 under windows is problematic.
* proc/native: disable Go 1.14 async preemption on Windows
See https://github.com/golang/go/issues/36494
It was reading all the way to the end of the debug_info section,
slowing down stacktraces substantially.
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 80344642562 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 22218288218 ns/op
i.e. a reduction of the cost of a breakpoint hit from 8ms to 2.2ms
Updates #1549
* pkg/proc: Introduce Target
* pkg/proc: Remove Common.fncallEnabled
Realistically we only block it on recorded backends.
* pkg/proc: Move fncallForG to Target
* pkg/proc: Remove CommonProcess
Remove final bit of functionality stored in CommonProcess and move it to
*Target.
* pkg/proc: Add SupportsFunctionCall to Target
* proc: separate amd64-arch code
separate amd64 code about stacktrace, so we can add arm64 stacktrace code.
* proc: implemente stacktrace of arm64
* delve now can use stack, frame commands on arm64-arch debug.
Co-authored-by: tykcd996 <tang.yuke@zte.com.cn>
Co-authored-by: hengwu0 <wu.heng@zte.com.cn>
* test: remove skip-code of stacktrace on arm64
* add LR DWARF register and remove skip-code for fixed tests
* proc: fix the Continue command after the hardcoded breakpoint on arm64
Arm64 use hardware breakpoint, and it will not set PC to the next instruction like amd64. We should move PC in both runtime.breakpoints and hardcoded breakpoints(probably cgo).
* proc: implement cgo stacktrace on arm64
* proc: combine amd64_stack.go and arm64_stack.go file
* proc: reorganize the stacktrace code
* move SwitchStack function arch-related
* fix Continue command after manual stop on arm64
* add timeout flag to make.go to enable infinite timeouts
Co-authored-by: aarzilli <alessandro.arzilli@gmail.com>
Co-authored-by: hengwu0 <wu.heng@zte.com.cn>
Co-authored-by: tykcd996 <56993522+tykcd996@users.noreply.github.com>
Co-authored-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
Expression such as:
config show-location-expr true
disassemble -a 0x4a23a0 0x4a23f2
disassemble -a 0x4a23a0 0x4a23f2
should all execute correctly.
Extend #795.
Adds a cache mapping goroutine IDs to goroutine objects, this allows
speeding up FindGoroutine and makes commands like 'goroutines -t' not
be accidentally quadratic in the number of goroutines.
Specifically, make sure that both DebugActiveProcess and
WaitForDebugEvent Windows APIs are executed on the same thread.
Otherwise WaitForDebugEvent fails with ERROR_INVALID_HANDLE as per its
documentation
https://docs.microsoft.com/en-us/windows/win32/api/debugapi/nf-debugapi-waitfordebugevent
'... Only the thread that created the process being debugged can call
WaitForDebugEvent. ...'
Fixes#1825
Due to a bug in the Go compiler midstack inlined calls do not report
their ranges correctly. We can't check if an address is in the range of
a DIE by simply looking at that DIE's range, we should also recursively
check the DIE's children's ranges.
Also fixes the way stacktraces of midstack inlined calls are reported
(they used to be inverted, with the deepest inlined stack frame
reported last).
Fixes#1795
Adds an API call that returns a list of packages contained in the
program and the files that were used to build them, and also a best
guess at which filesystem directory contained the package when it was
built.
This can be used by IDEs to map file paths if the debugging environment
doesn't match the build environment exactly.
