Due to a missing check TestCgoStacktrace2 didn't actually check
anything. Enable it and then skip it on linux/386 and linux/arm64 where
it's broken.
Co-authored-by: a <a@kra>
If the process receives a signal (or sends a singal to itself) and then
dies before we can route the signal back to it we still need to
retrieve its exit status.
Fixes a rare failure of TestIssue1101 in proc_test.go
Co-authored-by: a <a@kra>
* proc/tests: keep track of tests skipped due to backend problems
Mark tests skipped due to backend problems and add a script to keep
track of them.
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
* proc: use argument position for addr only when injecting function calls
We can not, in general, use the argument position to determine the
address of a formal parameter, it will not work in presence of
optimizations or inlining. In those cases formal arguments could be
stored in registers.
Fixes#2176
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Co-authored-by: a <a@kra>
* Revert "proc: Find executable should follow symbol links."
This reverts commit 3e04ad0fada0c3ab57caf58bc024e4c0f9a3e01a.
* proc: resolve symlinks when searching for split debug_info if path is /proc/pid/exe
Fixes#2168
During the testing of the core dump generation feature two bugs were
discovered in gdbserial:
1. we don't check that both bytes of the checksum are read, if the
buffer only has one byte we can end up reading only one byte instead
of two and the second byte will mess up the parsing of the next
packet
2. binary encoded packets can start with an 'E' and not be errors, when
using binary responses add an extra check for the lenght of the
response before deciding that the response is an error.
Unfortunately this encoding is inherently ambiguous (we can't
distinguish a 3 byte response starting with 'E' from an error) so
binary requests that lead to short responses should be avoided.
Testing this is complicated, they will be tested implicitly by the
upcoming core dump test.
Co-authored-by: a <a@kra>
Since proc is supposed to work independently from the target
architecture it shouldn't use architecture-dependent types, like
uintptr. For example when reading a 64bit core file on a 32bit
architecture, uintptr will be 32bit but the addresses proc needs to
represent will be 64bit.
Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
An internal breakpoint condition shouldn't ever error:
* use a ThreadContext to evaluate conditions if a goroutine isn't
available
* evaluate runtime.curg to a fake g variable containing only
`goid == 0` when there is no current goroutine
Fixes#2113
Recent changes to the way registers are handled broke reporting of AVX
registers (i.e. YMMx). This change restores the functionality by:
- concatenating the higher half of the YMMx registers to their
corresponding XMMx lower half (YMMx registers do not have an
independent DWARF register number)
- modifying the formatSSEReg function to handle them when they are
present.
Fixes#2033
Commit 1ee8d5c reviewed in Pull Request #1960 relaxed some tests using
goroutinestackprog but missed others.
Fixes some test flakiness that isn't relevant.
* proc: start variable visibility one line after their decl line
In most cases variables shouldn't be visible on their declaration line
because they won't be initialized there.
Function arguments are treated as an exception.
This fix is only applied to programs compiled with Go 1.15 or later as
previous versions of Go did not report the correct declaration line for
variables captured by closures.
Fixes#1134
* proc: silence go vet error
* Makefile: enable PIE tests on windows/Go 1.15
* core: support core files for PIEs on windows
* goversion: add Go 1.15 to supported versions
* proc: fix function call injection for Go 1.15
Go 1.15 changed the call injection protocol so that the runtime will
execute the injected call on a different (new) goroutine.
This commit changes the function call support in delve to:
1. correctly track down the call injection state after the runtime
switches to a different goroutine.
2. correctly perform the escapeCheck when stack values can come from
multiple goroutine stacks.
* proc: miscellaneous fixed for call injection under macOS with go 1.15
- create copy of SP in debugCallAXCompleteCall case because the code
used to assume that regs doesn't change
- fix automatic address calculation for function arguments when an
argument has a spurious DW_OP_piece at entry
The file:line information for the entrypoint is more acccurate than the
file:line information at a return point, which could be affected by a
compiler bug.
Fixes#2086
Recent change #2061:
292f5c69f0c769fd32c2e8b1e7153b56e908efd7
proc: step into unexported runtime funcs when already inside runtime
means that TestIssue414 (which tries to step repeatedly until the
program exits) can now steps through way more runtime code than it ever
did before. This causes this test to occasionally fail. Stepping
blindly through runtime code has never been particularly safe as the
runtime can switch to a different goroutine causing Delve to misbehave.
This change restores the previous behavior of TestIssue414 where Step
behaved like Next inside runtime code.
These methods only work if registers have been loaded once after the
last resume, there's probably no code path that calls SetXX before
Thread.Registers but lets make sure it can't happen anyway.
On platforms other than macOS this doesn't matter but on macOS a
segmentation fault will cause ContinueOnce to return an error, before
returning it we should still fix the current thread and selected
goroutine values.
Fixes#2078
Normally we don't step into unexported runtime functions because the
compiler is free to insert them into the code and they are not relevant
to the user, however if we are already stepping through a runtime
function we should let step into work normally and step into other
runtime functions.
Changes implementations of proc.Registers interface and the
op.DwarfRegisters struct so that floating point registers can be loaded
only when they are needed.
Removes the floatingPoint parameter from proc.Thread.Registers.
This accomplishes three things:
1. it simplifies the proc.Thread.Registers interface
2. it makes it impossible to accidentally create a broken set of saved
registers or of op.DwarfRegisters by accidentally calling
Registers(false)
3. it improves general performance of Delve by avoiding to load
floating point registers as much as possible
Floating point registers are loaded under two circumstances:
1. When the Slice method is called with floatingPoint == true
2. When the Copy method is called
Benchmark before:
BenchmarkConditionalBreakpoints-4 1 4327350142 ns/op
Benchmark after:
BenchmarkConditionalBreakpoints-4 1 3852642917 ns/op
Updates #1549
Unexport `GetDebugServerAbsolutePath` and avoid unnecessary repeated calls.
Remove `os.Stat` because `Exec.LookPath` has already used `os.Stat`.And Fix
some comments.
On linux platform, we simply treated `/proc/$pid/exe` as the
executable of targeting process when doing `dlv attach`. The
`/proc/$pid/exe` is a symbol link of the real executable file.
Delve couldn't find the corrsponding external debug file based on the
symbol link:
```
could not attach to pid $pid: could not open debug info
```
The fix is to evaluate the symbol links to the actual executable path.
The process could quit while we are inside stop, we should report the
error otherwise the following code will try to send on the closed
ptrace channel.
Fixes a sporadic error in TestIssue1101.
This flag allows users on UNIX systems to set the tty for the program
being debugged by Delve. This is useful for debugging command line
applications which need access to their own TTY, and also for
controlling the output of the debugged programs so that IDEs may open a
dedicated terminal to show the output for the process.
* gdbserial/gdbserver: Dynamically resolve debugserver binary
Instead of hardcoding the absolute path to the Command Line
Tools (CLT) binary, will attempt to resolve the path at the
$PATH, or at the Xcode bundle. If none are available, will
fallback to the default CLT location.
Fixes#986
* gdbserial/gdbserver: Log outgoing executed commands
Add logging to capture the executable and associated arguments used
in LLDBLaunch and LLDBAttach
Related to #986
* gdbserial/gdbserver: Add unit tests for helper function
Define unit tests for helper function. Setup each test to temporarily make
PATH variable, and file system changes, and subsequently revert them.
Related to #986
* gdbserial/gdbserver: Lazily load function
Lazily obtain absolute path to avoid increasing load times.
Remove flaky tests.
Related to #986
