* cmd/dlv: dlv version --verbose
That prints out runtime/debug.BuildInfo read from the dlv binary.
Users can retrieve the same info using `go version -m <path_to_dlv>`
but I think it is convenient to have.
If dlv was built from cloned delve repo:
```
$ ./dlv version -v
Delve Debugger
Version: 1.7.0
Build: $Id: e353a65161e6ed74952b96bbb62ebfc56090832b $
Build Details: go1.16.5
mod github.com/go-delve/delve (devel)
dep github.com/cosiner/argv v0.1.0 h1:BVDiEL32lwHukgJKP87btEPenzrrHUjajs/8yzaqcXg=
...
```
If dlv was built with `go install github.com/go-delve/delve@latest`
with go1.16+, or
`GO111MODULE=on go get github.com/go-delve/delve@latest`
from a clean main module:
```
$ ./dlv version -v
Delve Debugger
Version: 1.7.0
Build: $Id: e353a65161e6ed74952b96bbb62ebfc56090832b $
Build Details: go1.16.5
mod github.com/go-delve/delve v1.7.0
dep github.com/cosiner/argv v0.1.0 h1:BVDiEL32lwHukgJKP87btEPenzrrHUjajs/8yzaqcXg=
...
```
* remove an accidentally added bogus test
* terminal: add prompt when breakpoint is hit during next/step/stepout
Adds a prompt asking the user what to do when a breakpoint is hit on a
different goroutine while next/step/stepout is being executed.
Gives the user the opportunity to cancel next/step/stepout, continue
once skipping the breakpoint or automatically skipping all other
concurrent breakpoints until next/step/stepout is finished.
Fixes#2317
StaticBase is the difference between the entry point declared in the
image file and the entry point as loaded in memory, since this
difference could be a negative number we have to use a signed
comparison when searching for a mapping.
Causes intermittent test failures on windows when resolving interface
types for position independent executables.
Fixes#2620
Conversion form a moduledata object into an image object was
implemented by looking for a function covering the start address of the
text section of the moduledata object, and then converting that into
its corresponding image.
Unfortunately this seems to not always work. In particular it does not
work on linux/386 with go1.17 (but it might also fail on other
combinations): the start address of the text section is, for whatever
reason, not part of any function.
As a fallback simply scan all images we know of and return the closest
one that has start address less than or equal to the start address of
the text section we are looking for.
Fixes TestPluginVariables on go1.17/linux/386.
Fixes#2611
Co-authored-by: a <a@kra>
* terminal: improve 'on' command
Adds the ability to edit the list of commands executed after stopping
on a breakpoint, as well as converting a breakpoint into a tracepoint
and vice versa.
Prior to this it was possible to add commands to a breakpoint but
removing commands or changing a breakpoint into a tracepoint, or vice
versa, could only be done by removing and recreating the breakpoint.
Changes Breakpoint to allow multiple overlapping internal breakpoints
on the same instruction address.
This is done by changing the Breakpoint structure to contain a list of
"breaklets", each breaklet has a BreakpointKind and a condition
expression, independent of the other.
A breakpoint is considered active if any of its breaklets are active.
A breakpoint is removed when all its breaklets are removed.
We also change the terminology "internal breakpoint" to "stepping
breakpoint":
HasInternalBreakpoints -> HasSteppingBreakpoints
IsInternal -> IsStepping
etc...
The motivation for this change is implementing watchpoints on stack
variables.
Watching a stack variable requires also setting a special breakpoint to
find out when the variable goes out of scope. These breakpoints can not
be UserBreakpoints because only one user breakpoint is allowed on the
same instruction and they can not be internal breakpoints because they
should not be cleared when a next operation is completed (they should
be cleared when the variable watch is cleared).
Updates #279
This PR aims to add support for rr replay and core actions from the DAP layer. This basically encloses the following:
New launch modes: replay and core
The following modes are added:
replay: Replays an rr trace, allowing backwards flows (reverse continue and stepback). Requires a traceDirPath property on launch.json pointing to a valid rr trace directory.
Equivalent to dlv replay <tracedir> command.
core: Replays a core dump file, showing its callstack and the file matching the callsite. Requires a coreFilePath property on launch.json pointing to a valid coredump file.
Equivalent to dlv core <exe> <corefile> command.
Dependencies
To achieve this the following additional changes were made:
Implement the onStepBackRequest and onReverseContinueRequest methods on service/dap
Adapt onLaunchRequest with the requried validations and logic for these new modes
Use CapabilitiesEvent responses to enable the StepBack controls on the supported scenarios (see dicussion here)
Add the corresponding launch.json support on vs code:
Support for replay and core modes golang/vscode-go#1268
* service/dap: add panic and throw text to stopped event
We can add more information to the stopped events on errors using
the `Text` field in the stopped event. We already use this to display
the runtime errors. Adding this information to the stopped reason will
also help to show the user additional info when a stopped event is not
associated with a particular goroutine.
* proc: support new Go 1.17 panic/defer mechanism
Go 1.17 will create wrappers for deferred calls that take arguments.
Change defer reading code so that wrappers are automatically unwrapped.
Also the deferred function is called directly by runtime.gopanic, without going through runtime.callN which means that sometimes when a panic happens the stack is either:
0. deferred function call
1. deferred call wrapper
2. runtime.gopanic
or:
0. deferred function call
1. runtime.gopanic
instead of always being:
0. deferred function call
1. runtime.callN
2. runtime.gopanic
the isPanicCall check is changed accordingly.
* test: miscellaneous minor test fixes for Go 1.17
* proc: resolve inlined calls when stepping out of runtime.breakpoint
Calls to runtime.Breakpoint are inlined in Go 1.17 when inlining is
enabled, resolve inlined calls in stepInstructionOut.
* proc: add support for debugCallV2 with regabi
This change adds support for the new debug call protocol which had to
change for the new register ABI introduced in Go 1.17.
Summary of changes:
- Abstracts over the debug call version depending on the Go version
found in the binary.
- Uses R12 instead of RAX as the debug protocol register when the binary
is from Go 1.17 or later.
- Creates a variable directly from the DWARF entry for function
arguments to support passing arguments however the ABI expects.
- Computes a very conservative stack frame size for the call when
injecting a call into a Go process whose version is >=1.17.
Co-authored-by: Michael Anthony Knyszek <mknyszek@google.com>
Co-authored-by: Alessandro Arzilli <alessandro.arzilli@gmail.com>
* TeamCity: enable tests on go-tip
* goversion: version compatibility bump
* TeamCity: fix go-tip builds on macOS/arm64
Co-authored-by: Michael Anthony Knyszek <mknyszek@google.com>
ConvertEvalScope() attempts to find the scope for the specified
goroutine id and frame index. If the goroutine that is found is nil,
then it falls back to the threads stack trace to find the scope.
This fix makes sure that the frame id is taken into account for
thread strack traces as well.
We told clients that further loading of variables can be done by
specifying a type cast using the address of a variable that we
returned.
This does not work for registerized variables (or, in general,
variables that have a complex location expression) because we don't
give them unique addresses and we throw away the compositeMemory object
we made to read them.
This commit changes proc so that:
1. variables with location expression divided in pieces do get a unique
memory address
2. the compositeMemory object is saved somewhere
3. when an integer is cast back into a pointer type we look through our
saved compositeMemory objects to see if there is one that covers the
specified address and use it.
The unique memory addresses we generate have the MSB set to 1, as
specified by the Intel 86x64 manual addresses in this form are reserved
for kernel memory (which we can not read anyway) so we are guaranteed
to never generate a fake memory address that overlaps a real memory
address of the application.
The unfortunate side effect of this is that it will break clients that
do not deserialize the address to a 64bit integer. This practice is
contrary to how we defined our types and contrary to the specification
of the JSON format, as of json.org, however it is also fairly common,
due to javascript itself having only 53bit integers.
We could come up with a new mechanism but then even more old clients
would have to be changed.
Adds filtering and grouping to the goroutines command.
The current implementation of the goroutines command is modeled after
the threads command of gdb. It works well for programs that have up to
a couple dozen goroutines but becomes unusable quickly after that.
This commit adds the ability to filter and group goroutines by several
different properties, allowing a better debugging experience on
programs that have hundreds or thousands of goroutines.
While Go still mostly uses DWARF v4, newer versions of GCC will emit
DWARF v5 by default. This patch improves support for DWARF v5 by parsing
the .debug_line_str section and using that during file:line lookups.
This patch only includes support for files, not directories.
Co-authored-by: Derek Parker <deparker@redhat.com>
Ensure that any command executed after the process we are trying to
debug prints a correct and consistent exit status.
Previously the exit code was being lost after the first time we printed
that a process has exited. Additionally, certain commands would print
the PID of the process and other would not. This change makes everything
more correct and consistent.
Commit 30cdedae6910f5e9af6739845bacfd5b8778e745 introduced a dependency
from service/dap to pkg/terminal to call a stack printing function,
it's weird to have code that implements the DAP protocol depend on the
code for the JSON-RPC client.
Move PrintStack to a different package that can be called by both.
Apply a presentation hint to the internal runtime stack frames, so that these can be deemphasized in the UI. This should allow
users to more easily inspect their own code, and will keep the option to view those frames if they choose to.
If the client supports paging, we allow them to fetch array and slice items in chunks that we assume will be of a reasonable size. For example, VS Code requests indexed variables in chunks of 100.
Fixesgolang/vscode-go#1518
If the base address isn't set then indexing and slicing will not work.
Large floating point registers already had the base set but small
general purpose registers did not.
* pkg/proc: implement support for hit count breakpoints
* update comment
* udpate hitcount comment
* update HitCond description
* add test for hit condition error
* respond to review
* service/dap: add support for hit count breakpoints
* use amendbps to preserve hit counts
* update test health doc
* fix failing test
* simplify hit conditions
* REmove RequestString, use name instead
* update backend_test_health.md
* document hit count cond
* fix tests
Adds DWARF register number and support for AVX-512 registers.
Changes proc/gdbserial so that the 'g' and 'G' commands are never used
with debugserver since they seem to corrupt the thread state when used
on AVX-512 capable hardware.
Also changes TestClientServer_FpRegisters to be simpler and more
resilient to changes to the Go runtime.
Fixes#2479
The code populating runtimeTypeToDIE was incorrectly adding StaticBase
to the offset. We never noticed because on statically compiled
executables StaticBase is always zero and on PIE and plugins the
fallback code took care of the problem anyway.
A change in Go 1.17 broke the fallback code, making the issue apparent.
This commit fixes the setup of runtimeTypeToDIE and disables the
fallback code for Go 1.17 and later.
This change also fixes a rare failure in TestPluginVariables when PIE
is enabled.
Truncates the result of binary operations on integers to the size of
the resulting type.
Also rewrites convertInt to not require allocations.
Fixes#2454
The maintainer of debugserver says he wants to fix the problem with the
'g' command but doesn't know when it will happen. Treat the error 'E74'
for the 'g' command on debugserver as if the server had returned an
unsupported error so that, for this specific problem, the error doesn't
resurface in the future.
A RequestManualStop received while the target program is stopped can
induce a crash when the target is restarted.
This is caused by the phantom breakpoint detection that was introduced
in PR #2179 / commit e69d536.
Instead of always interpreting an unexplained SIGTRAP as a phantom
breakpoint memorize all possible unreported breakpoint hits and only
act on it when the thread hasn't moved from one.
Also clarifies the behavior of the halt command when it is received
while the target is stopped or in the process of stopping.
Handle the signaled status for the thread leader like we handle the
exited status, by returning ErrProcessExited and recording the killer
signal in it.
Prior to this commit we would find out about the death of the thread
later in the loop, the condition would still be reported as
ErrProcessExited, but without recording the signal number anywhere.
Also fixes a bug in TestAttachStopOnEntry where the test would
inadvertently cause a SIGPIPE to be sent to the target process, making
it terminate early.
* service/dap: implement exception info
* remove adding additional thread
* Fix tests
* add exceptionInfo tests
* update comments
* map paths to client paths
* remove launch.json
* remove change to ConvertEvalScope
* correct name of supportsExceptionInfoRequest
* Add TODO for deleting output event
* Print Stack header to buffer
* Try to move resolving exception info to onExceptionInfoRequest
* save the error and return if it is the current thread
* rename thread to g
* findgoroutine returns goroutine
* clean up findgoroutine
* log errors
* remove output event
* fix grammar
* service/dap: add type information to dap variables
* add comment explaining map type choice
* rename to setClientCapabilities
* respond to review
* update TypeString definition
Adds the low-level support for watchpoints (aka data breakpoints) to
the native linux/amd64 backend.
Does not add user interface or functioning support for watchpoints
on stack variables.
Updates #279
Changes the expression evaluation code so that register names, when not
shadowed by local or global variables, will evaluate to the current
value of the corresponding CPU register.
This allows a greater flexibility with displaying CPU registers than is
possible with using the ListRegisters API call. Also it allows
debuggers users to view register values even if the frontend they are
using does not implement a register view.
* examinememory: evaluate addr as expression
This makes it easy to read memory locations at an offset of a known
address, e.g.:
x 0xc000046800 + 32
* use feedback from @aarzilli
- expression mode is now enabled via -x flag
- support "-x var", "-x &var" in addition to "-x <addr expr>"
- some refactoring
* add test cases
* deal with double spaces
* update docs
* add new failing test
* fix docs
* simplify implementation, update test & docs
* Fix docs
* service/dap: add go build stderr to error response
* service/dap: add go build stderr to error response
* Skip message check for build errors
* test for flag provided message
There seems to be a problem where debugserver will leave a zombie
process instead of detaching correctly, we are sending the right
commands, it doesn't seem to be a problem with Delve.
We have some places where we use proc.ErrProcessExited and some places
that use &proc.ErrProcessExited, resulting in checks for process exited
errors occasionally failing on some architectures.
Uniform use of ErrProcessExited to the non-pointer version.
Fixes intermittent failure of TestStepOutPreservesGoroutine.
When restarting we must take care of setting breakpoint IDs correctly
so that enabled breakpoints do not end up having the same ID as a
disabled breakpoint, also we must make sure that breakpoints created
after restart will not get an ID already used by a disabled breakpoint.
Changes print so a format argument can be specified by using '%' as
prefix. For example:
print %x d
will print variable 'd' in hexadecimal. The interpretarion of the
format argument is the same as that of fmt's package.
Fixes#1038Fixes#1800Fixes#2159
* Adds toggle command
Also adds two rpc2 tests for testing the new functionality
* Removes Debuggers' ToggleBreakpoint method
rpc2's ToggleBreakpoint now calls AmendBreakpoint
Refactors the ClearBreakpoint to avoid a lock.
The godwarf package provides two ways to turn a dwarf.Entry into a
godwarf.Tree: LoadTree and EntryToTree. The former doesn't handle
children - it doesn't advance a Reader past them (in fact, it doesn't
even know about a Reader). EntryToTree is only used for variables and
formal param DIEs, which don't have children, and it would very likely
be incorrect to use it for DIEs with children. This patch makes the
function panic if the entry can have children.
This adds a workaround for the bug described at:
https://github.com/golang/go/issues/25841
Because dsymutil running on PIE does not adjust the address of
debug_frame entries (but adjusts debug_info entries) we try to do the
adjustment ourselves.
Updates #2346
* service/dap: support auto-loading of unloaded interfaces
* Make DeepSource happy
* Don't set reference if data failed to auto-load
* Use frame-less expressions
* Refine interface recursion capping test case
Co-authored-by: Polina Sokolova <polinasok@users.noreply.github.com>
- remove github workflow for testing macOS/amd64 that is now covered by
TeamCity
- fix DeepSource glob patterns to actually match what they are intended
to match (did the interpretation change?)
- disable some cgo tests on darwin/arm64
Delve represents registerized variables (fully or partially) using
compositeMemory, implementing proc.(*compositeMemory).WriteMemory is
necessary to make SetVariable and function calls work when Go will
switch to using the register calling convention in 1.17.
This commit also makes some refactoring by moving the code that
converts between register numbers and register names out of pkg/proc
into a different package.
* Avoid double removal of temp binary
* Add back accidentally removed empty line
* Simplify regex
* Use unique build output directories in test cases
* Recover TestLaunchDebugRequest hidden logging and refine error check
* Special case access-denied error on Windows
* Remove special case for access denied on Windows
* Increase remove delay on Win
Co-authored-by: Polina Sokolova <polinasok@users.noreply.github.com>
* TeamCity: add linux/arm64/tip configuration
So that it can be tested when we make the next-version-support-branch.
* tests: disable failing cgo tests on arm64
When cgo is used the address of the g struct is saved on the special
register TPIDR_EL0. Because executing C code could overwrite the
contents of R28 that normally contains the address of g we should read
it from TPIDR_EL0 instead when runtime.iscgo is set.
* Reformat pkg/locspec documentation so that it is formatted correctly
by godoc/pkgsite
* Unexport some types and variables in proc that don't need to be
exported.
* proc/core: off-by-one error reading ELF core files
core.(*splicedMemory).ReadMemory checked the entry interval
erroneously when dealing with contiguous entries.
* terminal,service,proc/*: adds dump command (gcore equivalent)
Adds the `dump` command that creates a core file from the target process.
Backends will need to implement a new, optional, method `MemoryMap` that
returns a list of mapped memory regions.
Additionally the method `DumpProcessNotes` can be implemented to write out
to the core file notes describing the target process and its threads. If
DumpProcessNotes is not implemented `proc.Dump` will write a description of
the process and its threads in a OS/arch-independent format (that only Delve
understands).
Currently only linux/amd64 implements `DumpProcessNotes`.
Core files are only written in ELF, there is no minidump or macho-o writers.
# Conflicts:
# pkg/proc/proc_test.go
Both structMember and findMethod implemented a depth-first search in
embedded fields but the Go specification requires a breadth-first
search. They also allowed promotion of fields in the concrete type of
embedded interfaces even though this is not allowed by Go.
Furthermore they both lacked protection from infinite recursion
when a type embeds itself and the user requests a non-existent field.
Fixes#2316
Add a helper method for collecting line table file references that
does the correct thing for DWARF 5 vs DWARF 4 (in the latter case you
have an implicit 0 entry which is the comp dir, whereas in the former
case you do not). This is to avoid out-of-bounds errors when examining
the file table section of a DWARF 5 compilation unit's line table.
Included is a new linux/amd-only test that includes a precompiled C
object file with a DWARF-5 section that triggers the bug in question.
Fixes#2319
The DWARF standard does not say that a DW_ATTR_abstract_origin can only
reference entries that appear before it, this change fixes BinaryInfo
to comply. See #2284 for an example of this happening.
Changs TestClientServer_FullStacktrace and
Test1ClientServer_FullStacktrace to log more information, also removes
code from TestFrameEvaluation that could mask the error.
Updates #2231
* add -json flag when running tests on TeamCity
* introduce TeamCity builds
* restore gdbserial constants for 386
Otherwise compilation fails.
* skip TestAttachRequest on Windows as it never finishes
* run tests on 1.16beta1
* proc: misc test fixes for Go 1.16
* proc: fix cgo stacktraces in Go 1.16 with simplified C -> Go call path
* dwarf/line: make dwarf/line correct when '\\' are used
Our code depends heavily on paths being '/' separated because go always
produced '/' separated file paths. The call to filepath.Join will
normalize the paths, on windows, to always be '\\' separated, which
violated our assumptions.
This didn't use to be a problem because the codepath that calls
filepath.Join was never exercised by executable files produced by Go,
but Go 1.16 started producing debug_line sections that use the
directory table with https://go-review.googlesource.com/c/go/+/263017/.
Fix this to always use path.Join after making sure, on windows, to
always normalize paths to use '/' as a separator. Replace the use of
filepath.IsAbs with an operating system independent version.
* goversion: bump supported Go version
If a thread exits while we are looking at it just treat it as if the
status had reported it as exited instead of doing something special.
Fixes flakiness in TestIssue387.
Fix bug in DAP test: TestEvaluateCallRequest.
In Go 1.15 the call injection will be executed on a different goroutine
from the goroutine where it was started on to avoid confusing the
garbage collector, the test must be aware of this fact and use the
goroutine ID from the stopped response instead of assuming 1 is the
currently selected goroutine.
Disables TestAttachDetach when running in Github Actions.
Disable some coredump tests when running in Github Actions (core size
limits?).
The comment on the advanceRegs() method was referencing several
nonexistent fields. This patch fixes that, and improves the comment to
reference the peculiar interaction between the method and it.regs.
evalFunctionCall needs to remove the breakpoint from the current thread
after starting the function call injection, otherwise Continue will
think that the thread is stopped at a breakpoint and return to the user
instead of continuing the call injection.
Adds a flag that distinguishes the return values of an injected
function call from the return values of a function call executed by the
target program.
This is needed to fix the problem we have with 1.15.4+ after the
backport is applied to it. The DWARF standard isn't clear on what
should happen with the end_of_sequence opcode but this is consistent
with debug/dwarf.LineReader as well as gdb.
* Use the active xcode-select path instead of a hardcoded Xcode path
* Refactored exec.Command to invoke Output instead of running with a custom buffer for stdout
Addresses review comment by @derekparker
1. Forward stdin/stdout/stderr to the target process when in foreground
mode instead of always forwarding the current tty (issue #1964)
2. When redirecting a file descriptor make sure to also specify
something for all three otherwise debugserver will misbehave (either
exit on launch or run but giving the target process a closed file
descriptor).
Fixes#1964
On linux we can not read memory if the thread we use to do it is
occupied doing certain system calls. The exact conditions when this
happens have never been clear.
This problem was worked around by using the Blocked method which
recognized the most common circumstances where this would happen.
However this is a hack: Blocked returning true doesn't mean that the
problem will manifest and Blocked returning false doesn't necessarily
mean the problem will not manifest. A side effect of this is issue
#2151 where sometimes we can't read the memory of a thread and find its
associated goroutine.
This commit fixes this problem by always reading memory using a thread
we know to be good for this, specifically the one returned by
ContinueOnce. In particular the changes are as follows:
1. Remove (ProcessInternal).CurrentThread and
(ProcessInternal).SetCurrentThread, the "current thread" becomes a
field of Target, CurrentThread becomes a (*Target) method and
(*Target).SwitchThread basically just sets a field Target.
2. The backends keep track of their own internal idea of what the
current thread is, to use it to read memory, this is the thread they
return from ContinueOnce as trapthread
3. The current thread in the backend and the current thread in Target
only ever get synchronized in two places: when the backend creates a
Target object the currentThread field of Target is initialized with the
backend's current thread and when (*Target).Restart gets called (when a
recording is rewound the currentThread used by Target might not exist
anymore).
4. We remove the MemoryReadWriter interface embedded in Thread and
instead add a Memory method to Process that returns a MemoryReadWriter.
The backends will return something here that will read memory using
the current thread saved by the backend.
5. The Thread.Blocked method is removed
One possible problem with this change is processes that have threads
with different memory maps. As far as I can determine this could happen
on old versions of linux but this option was removed in linux 2.5.
Fixes#2151
TestStepConcurrentDirect will occasionally fail (7% of the time on my
setup) by either causing the target processs to execute an invalid
instruction or (more infrequently) by switching to the wrong thread.
Both of those are caused by receiving SIGTRAPs for threads hitting a
breakpoint after it has been removed (the thread hits the breakpoint,
we stop everything and remove the breakpoint and only after we receive
the signal).
Change native.(*nativeProcess).stop to handle SIGTRAPs that can't be
attributed to a breakpoint, a hardcoded breakpoint in the program's
text, or manual stops (and therefore are likely caused by phantom
breakpoint hits).
Co-authored-by: a <a@kra>
* service/rpccommon: log error for conns rejected by --only-same-user
If no logger is enabled manually write to stderr instead.
Fixes#2209
* logflags: fix style complaints from DeepSource
Due to a missing check TestCgoStacktrace2 didn't actually check
anything. Enable it and then skip it on linux/386 and linux/arm64 where
it's broken.
Co-authored-by: a <a@kra>
If the process receives a signal (or sends a singal to itself) and then
dies before we can route the signal back to it we still need to
retrieve its exit status.
Fixes a rare failure of TestIssue1101 in proc_test.go
Co-authored-by: a <a@kra>
* proc/tests: keep track of tests skipped due to backend problems
Mark tests skipped due to backend problems and add a script to keep
track of them.
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
* proc: use argument position for addr only when injecting function calls
We can not, in general, use the argument position to determine the
address of a formal parameter, it will not work in presence of
optimizations or inlining. In those cases formal arguments could be
stored in registers.
Fixes#2176
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Co-authored-by: a <a@kra>
* dwarf/line: ignore end_of_sequence entry if AllPCsBetween
Go 1.15 (but possibly prior versions of Go too) has a tendency to use
an address in the middle of an instruction for this entry, but if it
was correct it would be after the last instruction of the function
anyway.
This problem manifests especially frequently as a target crash in
TestStepConcurrentPtr on linux/arm64 (~6% of the runs).
* Travis-CI: add ignorechecksum option to chocolatey command
Looks like a configuration problem on chocolatey's end.
Co-authored-by: a <a@kra>
* Revert "proc: Find executable should follow symbol links."
This reverts commit 3e04ad0fada0c3ab57caf58bc024e4c0f9a3e01a.
* proc: resolve symlinks when searching for split debug_info if path is /proc/pid/exe
Fixes#2168
During the testing of the core dump generation feature two bugs were
discovered in gdbserial:
1. we don't check that both bytes of the checksum are read, if the
buffer only has one byte we can end up reading only one byte instead
of two and the second byte will mess up the parsing of the next
packet
2. binary encoded packets can start with an 'E' and not be errors, when
using binary responses add an extra check for the lenght of the
response before deciding that the response is an error.
Unfortunately this encoding is inherently ambiguous (we can't
distinguish a 3 byte response starting with 'E' from an error) so
binary requests that lead to short responses should be avoided.
Testing this is complicated, they will be tested implicitly by the
upcoming core dump test.
Co-authored-by: a <a@kra>
Since proc is supposed to work independently from the target
architecture it shouldn't use architecture-dependent types, like
uintptr. For example when reading a 64bit core file on a 32bit
architecture, uintptr will be 32bit but the addresses proc needs to
represent will be 64bit.
Adds features to support default file descriptor redirects for the
target process:
1. A new command line flag '--redirect' and '-r' are added to specify
file redirects for the target process
2. New syntax is added to the 'restart' command to specify file
redirects.
3. Interactive instances will check if stdin/stdout and stderr are
terminals and print a helpful error message if they aren't.
An internal breakpoint condition shouldn't ever error:
* use a ThreadContext to evaluate conditions if a goroutine isn't
available
* evaluate runtime.curg to a fake g variable containing only
`goid == 0` when there is no current goroutine
Fixes#2113
Recent changes to the way registers are handled broke reporting of AVX
registers (i.e. YMMx). This change restores the functionality by:
- concatenating the higher half of the YMMx registers to their
corresponding XMMx lower half (YMMx registers do not have an
independent DWARF register number)
- modifying the formatSSEReg function to handle them when they are
present.
Fixes#2033
Commit 1ee8d5c reviewed in Pull Request #1960 relaxed some tests using
goroutinestackprog but missed others.
Fixes some test flakiness that isn't relevant.
